diff mbox

[3/5] ARM: BCM5301X: Set GPIO enabling USB power on Netgear R7000

Message ID 20161206171714.22738-3-zajec5@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Rafał Miłecki Dec. 6, 2016, 5:17 p.m. UTC 
There is one GPIO controlling power for both USB ports.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Jon Mason Dec. 6, 2016, 7:59 p.m. UTC | #1 
On Tue, Dec 06, 2016 at 06:17:12PM +0100, Rafał Miłecki wrote:
> There is one GPIO controlling power for both USB ports.
> 
> Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Was the double Signed-off-by intentional?

> ---
>  arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
> index 0225d82..7ab1176 100644
> --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
> +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
> @@ -100,3 +100,11 @@
>  		};
>  	};
>  };
> +
> +&usb2 {
> +	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&usb3 {
> +	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
> +};
> -- 
> 2.10.1
>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index 0225d82..7ab1176 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -100,3 +100,11 @@ 
 		};
 	};
 };
+
+&usb2 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};