@@ -31,6 +31,8 @@
#define AXP20X_USB_STATUS_VBUS_VALID BIT(2)
#define AXP20X_VBUS_VHOLD_uV(b) (4000000 + (((b) >> 3) & 7) * 100000)
+#define AXP20X_VBUS_VHOLD_MASK GENMASK(5, 3)
+#define AXP20X_VBUS_VHOLD_OFFSET 3
#define AXP20X_VBUS_CLIMIT_MASK 3
#define AXP20X_VBUC_CLIMIT_900mA 0
#define AXP20X_VBUC_CLIMIT_500mA 1
@@ -155,6 +157,81 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
return 0;
}
+static int axp20x_usb_power_set_voltage_min(struct axp20x_usb_power *power,
+ int intval)
+{
+ int val;
+
+ switch (intval) {
+ case 4000000:
+ case 4100000:
+ case 4200000:
+ case 4300000:
+ case 4400000:
+ case 4500000:
+ case 4600000:
+ case 4700000:
+ val = (intval - 4000000) / 100000;
+ return regmap_update_bits(power->regmap,
+ AXP20X_VBUS_IPSOUT_MGMT,
+ AXP20X_VBUS_VHOLD_MASK,
+ val << AXP20X_VBUS_VHOLD_OFFSET);
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power,
+ int intval)
+{
+ int val;
+
+ switch (intval) {
+ case 100000:
+ if (power->axp20x_id == AXP221_ID)
+ return -EINVAL;
+ case 500000:
+ case 900000:
+ val = (900000 - intval) / 400000;
+ return regmap_update_bits(power->regmap,
+ AXP20X_VBUS_IPSOUT_MGMT,
+ AXP20X_VBUS_CLIMIT_MASK, val);
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static int axp20x_usb_power_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct axp20x_usb_power *power = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ return axp20x_usb_power_set_voltage_min(power, val->intval);
+
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ return axp20x_usb_power_set_current_max(power, val->intval);
+
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static int axp20x_usb_power_prop_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN ||
+ psp == POWER_SUPPLY_PROP_CURRENT_MAX;
+}
+
static enum power_supply_property axp20x_usb_power_properties[] = {
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_PRESENT,
@@ -178,7 +255,9 @@ static const struct power_supply_desc axp20x_usb_power_desc = {
.type = POWER_SUPPLY_TYPE_USB,
.properties = axp20x_usb_power_properties,
.num_properties = ARRAY_SIZE(axp20x_usb_power_properties),
+ .property_is_writeable = axp20x_usb_power_prop_writeable,
.get_property = axp20x_usb_power_get_property,
+ .set_property = axp20x_usb_power_set_property,
};
static const struct power_supply_desc axp22x_usb_power_desc = {
@@ -186,7 +265,9 @@ static const struct power_supply_desc axp22x_usb_power_desc = {
.type = POWER_SUPPLY_TYPE_USB,
.properties = axp22x_usb_power_properties,
.num_properties = ARRAY_SIZE(axp22x_usb_power_properties),
+ .property_is_writeable = axp20x_usb_power_prop_writeable,
.get_property = axp20x_usb_power_get_property,
+ .set_property = axp20x_usb_power_set_property,
};
static int axp20x_usb_power_probe(struct platform_device *pdev)
AXP20X and AXP22X PMICs allow setting the min voltage and max current of VBUS power supply. This adds entries in sysfs to allow to do so. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> --- v2: - moving defines from header mfd/axp20x.h to the driver, - adding two functions to reduce indentation in axp20x_usb_power_set_property, - adding new define for VBUS register VHOLD bits offset, - switching return values in case of invalid value from 0 to -EINVAL, drivers/power/supply/axp20x_usb_power.c | 81 +++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+)