diff mbox

[v21,08/13] clocksource: arm_arch_timer: refactor MMIO timer probing.

Message ID 20170206185015.12296-9-fu.wei@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

fu.wei@linaro.org Feb. 6, 2017, 6:50 p.m. UTC 
From: Fu Wei <fu.wei@linaro.org>

Currently the code to probe MMIO architected timers mixes DT parsing with
actual poking of hardware. This makes the code harder than necessary to
understand, and makes it difficult to add support for probing via ACPI.

This patch factors all the DT-specific logic out of arch_timer_mem_init(),
into a new function arch_timer_mem_of_init().
The former pokes the hardware and determines the suitablility of frames
based on a datastructure populated by the latter.

This cleanly separates the two and will make it possible to add probing
using the ACPI GTDT in subsequent patches.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/clocksource/arm_arch_timer.c | 156 +++++++++++++++++++++++++----------
 1 file changed, 111 insertions(+), 45 deletions(-)
diff mbox

Patch

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index f2b9ec4..73e875d 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -995,17 +995,20 @@  static int __init arch_timer_of_init(struct device_node *np)
 CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
 CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
 
-static int __init arch_timer_mem_init(struct device_node *np)
+static int __init arch_timer_mem_init(struct arch_timer_mem *timer_mem)
 {
-	struct device_node *frame, *best_frame = NULL;
 	void __iomem *cntctlbase, *base;
-	unsigned int irq, ret = -EINVAL;
+	struct arch_timer_mem_frame *best_frame = NULL;
+	unsigned int irq;
 	u32 cnttidr;
+	int i, ret;
 
-	arch_timers_present |= ARCH_TIMER_TYPE_MEM;
-	cntctlbase = of_iomap(np, 0);
+	if (!timer_mem->num_frames)
+		return -ENODEV;
+
+	cntctlbase = ioremap(timer_mem->cntctlbase, timer_mem->size);
 	if (!cntctlbase) {
-		pr_err("Can't find CNTCTLBase\n");
+		pr_err("Can't map CNTCTLBase.\n");
 		return -ENXIO;
 	}
 
@@ -1015,26 +1018,18 @@  static int __init arch_timer_mem_init(struct device_node *np)
 	 * Try to find a virtual capable frame. Otherwise fall back to a
 	 * physical capable frame.
 	 */
-	for_each_available_child_of_node(np, frame) {
-		int n;
-		u32 cntacr;
-
-		if (of_property_read_u32(frame, "frame-number", &n)) {
-			pr_err("Missing frame-number\n");
-			of_node_put(frame);
-			goto out;
-		}
+	for (i = 0; i < timer_mem->num_frames; i++) {
+		u32 cntacr = CNTACR_RFRQ | CNTACR_RWPT | CNTACR_RPCT |
+			     CNTACR_RWVT | CNTACR_RVOFF | CNTACR_RVCT;
+		int n = timer_mem->frame[i].frame_nr;
 
 		/* Try enabling everything, and see what sticks */
-		cntacr = CNTACR_RFRQ | CNTACR_RWPT | CNTACR_RPCT |
-			 CNTACR_RWVT | CNTACR_RVOFF | CNTACR_RVCT;
 		writel_relaxed(cntacr, cntctlbase + CNTACR(n));
 		cntacr = readl_relaxed(cntctlbase + CNTACR(n));
 
 		if ((cnttidr & CNTTIDR_VIRT(n)) &&
 		    !(~cntacr & (CNTACR_RWVT | CNTACR_RVCT))) {
-			of_node_put(best_frame);
-			best_frame = frame;
+			best_frame = &timer_mem->frame[i];
 			arch_timer_mem_use_virtual = true;
 			break;
 		}
@@ -1042,55 +1037,126 @@  static int __init arch_timer_mem_init(struct device_node *np)
 		if (~cntacr & (CNTACR_RWPT | CNTACR_RPCT))
 			continue;
 
-		of_node_put(best_frame);
-		best_frame = of_node_get(frame);
+		best_frame = &timer_mem->frame[i];
 	}
+	iounmap(cntctlbase);
 
-	ret= -ENXIO;
-	base = arch_counter_base = of_io_request_and_map(best_frame, 0,
-							 "arch_mem_timer");
-	if (IS_ERR(base)) {
-		pr_err("Can't map frame's registers\n");
-		goto out;
+	if (!best_frame) {
+		pr_err("Can't find frame for register\n");
+		return -EINVAL;
 	}
 
 	if (arch_timer_mem_use_virtual)
-		irq = irq_of_parse_and_map(best_frame, ARCH_TIMER_VIRT_SPI);
+		irq = best_frame->virt_irq;
 	else
-		irq = irq_of_parse_and_map(best_frame, ARCH_TIMER_PHYS_SPI);
+		irq = best_frame->phys_irq;
 
-	ret = -EINVAL;
 	if (!irq) {
 		pr_err("Frame missing %s irq.\n",
 		       arch_timer_mem_use_virtual ? "virt" : "phys");
-		goto out;
+		return -EINVAL;
 	}
 
-	/*
-	 * Try to determine the frequency from the device tree,
-	 * if fail, get the frequency from the CNTFRQ reg of MMIO timer.
-	 */
-	if (of_property_read_u32(np, "clock-frequency", &arch_timer_mmio_freq))
+	if (!request_mem_region(best_frame->cntbase, best_frame->size,
+				"arch_mem_timer"))
+		return -EBUSY;
+
+	base = ioremap(best_frame->cntbase, best_frame->size);
+	if (!base) {
+		pr_err("Can't map frame's registers\n");
+		return -ENXIO;
+	}
+
+	if (!arch_timer_mmio_freq)
 		arch_timer_mmio_freq = arch_timer_get_mmio_freq(base);
-	if (!arch_timer_mmio_freq) {
-		pr_err(FW_BUG "frequency not available for MMIO timer.\n");
-		ret = -EINVAL;
-		goto out;
+	if (!arch_timer_mmio_freq ||
+	    (arch_timer_sysreg_freq &&
+	     arch_timer_mmio_freq != arch_timer_sysreg_freq)) {
+		pr_err(FW_BUG "invalid frequency for MMIO timer.\n");
+		arch_timer_mmio_freq = 0;
+		iounmap(base);
+		return -EINVAL;
 	}
 
 	ret = arch_timer_mem_register(base, irq);
-	if (ret)
+	if (ret) {
+		iounmap(base);
+		return ret;
+	}
+
+	arch_counter_base = base;
+	arch_timers_present |= ARCH_TIMER_TYPE_MEM;
+
+	return 0;
+}
+
+static int __init arch_timer_mem_of_init(struct device_node *np)
+{
+	struct arch_timer_mem *timer_mem;
+	struct device_node *frame_node;
+	struct resource res;
+	int i, ret = -EINVAL;
+
+	timer_mem = kzalloc(sizeof(*timer_mem), GFP_KERNEL);
+	if (!timer_mem)
+		return -ENOMEM;
+
+	if (of_address_to_resource(np, 0, &res))
 		goto out;
+	timer_mem->cntctlbase = res.start;
+	timer_mem->size = resource_size(&res);
+
+	i = 0;
+	for_each_available_child_of_node(np, frame_node) {
+		int n;
+		struct arch_timer_mem_frame *frame;
+
+		if (i >= ARCH_TIMER_MEM_MAX_FRAMES) {
+			pr_err(FW_BUG "too many frames, only %u are permitted.\n",
+			       ARCH_TIMER_MEM_MAX_FRAMES);
+			goto out;
+		}
 
-	if (!arch_timer_needs_of_probing())
+		frame = &timer_mem->frame[i];
+
+		if (of_property_read_u32(frame_node, "frame-number", &n)) {
+			pr_err(FW_BUG "Missing frame-number\n");
+			of_node_put(frame_node);
+			goto out;
+		}
+		frame->frame_nr = n;
+
+		if (of_address_to_resource(frame_node, 0, &res)) {
+			of_node_put(frame_node);
+			goto out;
+		}
+		frame->cntbase = res.start;
+		frame->size = resource_size(&res);
+
+		frame->virt_irq = irq_of_parse_and_map(frame_node,
+						       ARCH_TIMER_VIRT_SPI);
+		frame->phys_irq = irq_of_parse_and_map(frame_node,
+						       ARCH_TIMER_PHYS_SPI);
+
+		i++;
+	}
+	timer_mem->num_frames = i;
+
+	/*
+	 * Try to get the frequency from the device tree,
+	 * if fail, we will try the CNTFRQ register in arch_timer_mem_init.
+	 */
+	of_property_read_u32(np, "clock-frequency", &arch_timer_mmio_freq);
+
+	ret = arch_timer_mem_init(timer_mem);
+	if (!ret && !arch_timer_needs_of_probing())
 		ret = arch_timer_common_init();
 out:
-	iounmap(cntctlbase);
-	of_node_put(best_frame);
+	kfree(timer_mem);
 	return ret;
 }
 CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
-		       arch_timer_mem_init);
+		       arch_timer_mem_of_init);
 
 #ifdef CONFIG_ACPI
 static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags)