@@ -24,8 +24,6 @@
#include <linux/irq.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
#include <linux/amba/pl08x.h>
#include <linux/amba/mmci.h>
#include <linux/of.h>
@@ -45,73 +43,6 @@
#include <mach/board.h>
#include "common.h"
-/*
- * AMBA LCD controller
- */
-static struct clcd_panel conn_lcd_panel = {
- .mode = {
- .name = "QVGA portrait",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 191828,
- .left_margin = 22,
- .right_margin = 11,
- .upper_margin = 2,
- .lower_margin = 1,
- .hsync_len = 5,
- .vsync_len = 2,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = (TIM2_IVS | TIM2_IHS),
- .cntl = (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) |
- CNTL_LCDBPP16_565),
- .bpp = 16,
-};
-#define PANEL_SIZE (3 * SZ_64K)
-
-static int lpc32xx_clcd_setup(struct clcd_fb *fb)
-{
- dma_addr_t dma;
-
- fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, PANEL_SIZE, &dma,
- GFP_KERNEL);
- if (!fb->fb.screen_base) {
- printk(KERN_ERR "CLCD: unable to map framebuffer\n");
- return -ENOMEM;
- }
-
- fb->fb.fix.smem_start = dma;
- fb->fb.fix.smem_len = PANEL_SIZE;
- fb->panel = &conn_lcd_panel;
-
- return 0;
-}
-
-static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
- return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
- fb->fb.fix.smem_start, fb->fb.fix.smem_len);
-}
-
-static void lpc32xx_clcd_remove(struct clcd_fb *fb)
-{
- dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
- fb->fb.fix.smem_start);
-}
-
-static struct clcd_board lpc32xx_clcd_data = {
- .name = "Phytec LCD",
- .check = clcdfb_check,
- .decode = clcdfb_decode,
- .setup = lpc32xx_clcd_setup,
- .mmap = lpc32xx_clcd_mmap,
- .remove = lpc32xx_clcd_remove,
-};
-
static struct pl08x_channel_data pl08x_slave_channels[] = {
{
.bus_id = "nand-slc",
@@ -161,7 +92,6 @@ static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = {
static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL),
OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL),
- OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),
OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd",
&lpc32xx_mmci_data),