| Message ID | 20170323223045.15786-1-zajec5@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello Rafal, On Thu, Mar 23, 2017 at 11:30:44PM +0100, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > This commit documents binding for thermal used in Northstar family SoCs. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- > .../devicetree/bindings/thermal/brcm,ns-thermal | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/brcm,ns-thermal > > diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal > new file mode 100644 > index 000000000000..9a22dd76ec01 > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal > @@ -0,0 +1,17 @@ > +* Broadcom Northstar Thermal > + > +This binding describes thermal sensor that is part of Northstar's DMU (Device > +Management Unit). > + > +Required properties: > +- compatible : Must be "brcm,ns-thermal" > +- reg : iomem address range of PVTMON registers > +- #thermal-sensor-cells : Should be <0> > + > +Example: > + > +thermal { > + compatible = "brcm,ns-thermal"; > + reg = <0x1800c2c0 0x10>; > + #thermal-sensor-cells = <0>; > +}; Could you please also include an example of the thermal zone one should include in the board/cpu DTS while using this sensor? Besides, based on what I saw you in your driver, you could also describe your offset and slope in DT, and read them using thermal helpers. BR, > -- > 2.11.0 >
diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal new file mode 100644 index 000000000000..9a22dd76ec01 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal @@ -0,0 +1,17 @@ +* Broadcom Northstar Thermal + +This binding describes thermal sensor that is part of Northstar's DMU (Device +Management Unit). + +Required properties: +- compatible : Must be "brcm,ns-thermal" +- reg : iomem address range of PVTMON registers +- #thermal-sensor-cells : Should be <0> + +Example: + +thermal { + compatible = "brcm,ns-thermal"; + reg = <0x1800c2c0 0x10>; + #thermal-sensor-cells = <0>; +};