@@ -102,3 +102,70 @@
label = "caiman:white:sata";
};
};
+
+&nand {
+ /* 128MiB */
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x200000>; /* 2MiB */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u_env";
+ reg = <0x200000 0x40000>; /* 256KiB */
+ };
+
+ partition@140000 {
+ label = "s_env";
+ reg = <0x240000 0x40000>; /* 256KiB */
+ };
+
+ partition@900000 {
+ label = "devinfo";
+ reg = <0x900000 0x100000>; /* 1MiB */
+ read-only;
+ };
+
+ /* kernel1 overlaps with rootfs1 by design */
+ partition@a00000 {
+ label = "kernel1";
+ reg = <0xa00000 0x2800000>; /* 40MiB */
+ };
+
+ partition@1000000 {
+ label = "rootfs1";
+ reg = <0x1000000 0x2200000>; /* 34MiB */
+ };
+
+ /* kernel2 overlaps with rootfs2 by design */
+ partition@3200000 {
+ label = "kernel2";
+ reg = <0x3200000 0x2800000>; /* 40MiB */
+ };
+
+ partition@3800000 {
+ label = "rootfs2";
+ reg = <0x3800000 0x2200000>; /* 34MiB */
+ };
+
+ /*
+ * 38MiB, last MiB is for the BBT, not writable
+ */
+ partition@5a00000 {
+ label = "syscfg";
+ reg = <0x5a00000 0x2600000>;
+ };
+
+ /*
+ * Unused area between "s_env" and "devinfo".
+ * Moved here because otherwise the renumbered
+ * partitions would break the bootloader
+ * supplied bootargs
+ */
+ partition@180000 {
+ label = "unused_area";
+ reg = <0x280000 0x680000>; /* 6.5MiB */
+ };
+};
@@ -102,3 +102,70 @@
label = "cobra:white:sata";
};
};
+
+&nand {
+ /* 128MiB */
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x200000>; /* 2MiB */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u_env";
+ reg = <0x200000 0x40000>; /* 256KiB */
+ };
+
+ partition@140000 {
+ label = "s_env";
+ reg = <0x240000 0x40000>; /* 256KiB */
+ };
+
+ partition@900000 {
+ label = "devinfo";
+ reg = <0x900000 0x100000>; /* 1MiB */
+ read-only;
+ };
+
+ /* kernel1 overlaps with rootfs1 by design */
+ partition@a00000 {
+ label = "kernel1";
+ reg = <0xa00000 0x2800000>; /* 40MiB */
+ };
+
+ partition@1000000 {
+ label = "rootfs1";
+ reg = <0x1000000 0x2200000>; /* 34MiB */
+ };
+
+ /* kernel2 overlaps with rootfs2 by design */
+ partition@3200000 {
+ label = "kernel2";
+ reg = <0x3200000 0x2800000>; /* 40MiB */
+ };
+
+ partition@3800000 {
+ label = "rootfs2";
+ reg = <0x3800000 0x2200000>; /* 34MiB */
+ };
+
+ /*
+ * 38MiB, last MiB is for the BBT, not writable
+ */
+ partition@5a00000 {
+ label = "syscfg";
+ reg = <0x5a00000 0x2600000>;
+ };
+
+ /*
+ * Unused area between "s_env" and "devinfo".
+ * Moved here because otherwise the renumbered
+ * partitions would break the bootloader
+ * supplied bootargs
+ */
+ partition@180000 {
+ label = "unused_area";
+ reg = <0x280000 0x680000>; /* 6.5MiB */
+ };
+};
@@ -102,3 +102,70 @@
label = "shelby:white:sata";
};
};
+
+&nand {
+ /* 128MiB */
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x200000>; /* 2MiB */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u_env";
+ reg = <0x200000 0x40000>; /* 256KiB */
+ };
+
+ partition@140000 {
+ label = "s_env";
+ reg = <0x240000 0x40000>; /* 256KiB */
+ };
+
+ partition@900000 {
+ label = "devinfo";
+ reg = <0x900000 0x100000>; /* 1MiB */
+ read-only;
+ };
+
+ /* kernel1 overlaps with rootfs1 by design */
+ partition@a00000 {
+ label = "kernel1";
+ reg = <0xa00000 0x2800000>; /* 40MiB */
+ };
+
+ partition@1000000 {
+ label = "rootfs1";
+ reg = <0x1000000 0x2200000>; /* 34MiB */
+ };
+
+ /* kernel2 overlaps with rootfs2 by design */
+ partition@3200000 {
+ label = "kernel2";
+ reg = <0x3200000 0x2800000>; /* 40MiB */
+ };
+
+ partition@3800000 {
+ label = "rootfs2";
+ reg = <0x3800000 0x2200000>; /* 34MiB */
+ };
+
+ /*
+ * 38MiB, last MiB is for the BBT, not writable
+ */
+ partition@5a00000 {
+ label = "syscfg";
+ reg = <0x5a00000 0x2600000>;
+ };
+
+ /*
+ * Unused area between "s_env" and "devinfo".
+ * Moved here because otherwise the renumbered
+ * partitions would break the bootloader
+ * supplied bootargs
+ */
+ partition@180000 {
+ label = "unused_area";
+ reg = <0x280000 0x680000>; /* 6.5MiB */
+ };
+};
@@ -172,74 +172,12 @@
};
&nand {
+ /* 128MiB or 256MiB */
status = "okay";
num-cs = <1>;
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x200000>; /* 2MiB */
- read-only;
- };
-
- partition@100000 {
- label = "u_env";
- reg = <0x200000 0x40000>; /* 256KiB */
- };
-
- partition@140000 {
- label = "s_env";
- reg = <0x240000 0x40000>; /* 256KiB */
- };
-
- partition@900000 {
- label = "devinfo";
- reg = <0x900000 0x100000>; /* 1MiB */
- read-only;
- };
-
- /* kernel1 overlaps with rootfs1 by design */
- partition@a00000 {
- label = "kernel1";
- reg = <0xa00000 0x2800000>; /* 40MiB */
- };
-
- partition@1000000 {
- label = "rootfs1";
- reg = <0x1000000 0x2200000>; /* 34MiB */
- };
-
- /* kernel2 overlaps with rootfs2 by design */
- partition@3200000 {
- label = "kernel2";
- reg = <0x3200000 0x2800000>; /* 40MiB */
- };
-
- partition@3800000 {
- label = "rootfs2";
- reg = <0x3800000 0x2200000>; /* 34MiB */
- };
-
- /*
- * 38MiB, last MiB is for the BBT, not writable
- */
- partition@5a00000 {
- label = "syscfg";
- reg = <0x5a00000 0x2600000>;
- };
-
- /*
- * Unused area between "s_env" and "devinfo".
- * Moved here because otherwise the renumbered
- * partitions would break the bootloader
- * supplied bootargs
- */
- partition@180000 {
- label = "unused_area";
- reg = <0x280000 0x680000>; /* 6.5MiB */
- };
};
&mdio {
Move the partition layout to individual boards. The Linksys WRT 3200 ACM (Rango) comes with a 256MiB nand flash chip and different layout. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> --- Dismissed alternatives: a) Partition layouts as fragments for use with overlay. While the only alternative which might be worth considering it depends on optional overlay support. So should be selected by the target or at least be in the defconfig. Also feels like the mechanism wasn't intended to be used like this. Also bloats the dtbS. b) Adding a separate node for each variant would require to delete the others in the individual dts, just not enabling them isn't enough. c) Use partition layout dtsi which can be included separately. Two more dtsi for now. d) Delete and recreate partitions / nand node for Rango. e) Make partitions child nodes of a partition-layout node to ease defining custom layouts. Somewhat big of a change --- arch/arm/boot/dts/armada-385-linksys-caiman.dts | 67 +++++++++++++++++++++++++ arch/arm/boot/dts/armada-385-linksys-cobra.dts | 67 +++++++++++++++++++++++++ arch/arm/boot/dts/armada-385-linksys-shelby.dts | 67 +++++++++++++++++++++++++ arch/arm/boot/dts/armada-385-linksys.dtsi | 64 +---------------------- 4 files changed, 202 insertions(+), 63 deletions(-)