@@ -309,6 +309,21 @@
bias-pull-up;
};
+ rmii_pins: rmii_pins {
+ pins = "PD10", "PD11", "PD13", "PD14", "PD17",
+ "PD18", "PD19", "PD20", "PD22", "PD23";
+ function = "emac";
+ drive-strength = <40>;
+ };
+
+ rgmii_pins: rgmii_pins {
+ pins = "PD8", "PD9", "PD10", "PD11", "PD12",
+ "PD13", "PD15", "PD16", "PD17", "PD18",
+ "PD19", "PD20", "PD21", "PD22", "PD23";
+ function = "emac";
+ drive-strength = <40>;
+ };
+
uart0_pins_a: uart0@0 {
pins = "PB8", "PB9";
function = "uart0";
@@ -433,6 +448,26 @@
#size-cells = <0>;
};
+ emac: ethernet@1c30000 {
+ compatible = "allwinner,sun50i-a64-emac";
+ syscon = <&syscon>;
+ reg = <0x01c30000 0x100>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
The dwmac-sun8i is an Ethernet MAC that supports 10/100/1000 Mbit connections. It is very similar to the device found in the Allwinner H3, but lacks the internal 100 Mbit PHY and its associated control bits. This adds the necessary bits to the Allwinner A64 SoC .dtsi, but keeps it disabled at this level. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 35 +++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)