Message ID | 20170607103242.16008-1-enric.balletbo@collabora.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Wed, Jun 07, 2017 at 12:32:39PM +0200, Enric Balletbo i Serra wrote: > This patch adds a new binding documentation for the TPS65217 MFD and > updates the documentation for all the sub-devices in accordance to get > each individual sub-driver functioning correctly. Explain why breaking compatibility is okay. > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > --- > .../bindings/input/tps65218-pwrbutton.txt | 2 +- > .../bindings/leds/backlight/tps65217-backlight.txt | 24 ++--- > Documentation/devicetree/bindings/mfd/tps65217.txt | 100 +++++++++++++++++++++ > .../devicetree/bindings/regulator/tps65217.txt | 8 +- > 4 files changed, 119 insertions(+), 15 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mfd/tps65217.txt > > diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt > index 8682ab6..603a3f0 100644 > --- a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt > +++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt > @@ -1,7 +1,7 @@ > Texas Instruments TPS65217 and TPS65218 power button > > This module is part of the TPS65217/TPS65218. For more details about the whole > -TPS65217 chip see Documentation/devicetree/bindings/regulator/tps65217.txt. > +TPS65217 chip see Documentation/devicetree/bindings/mfd/tps65217.txt. > > This driver provides a simple power button event via an Interrupt. > > diff --git a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt > index 5fb9279..a1bc465 100644 > --- a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt > +++ b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt > @@ -1,11 +1,13 @@ > -TPS65217 family of regulators > +Texas Instruments TPS65217 backlight regulator > + > +This module is part of the TPS65217. For more details about the whole > +TPS65217 chip see Documentation/devicetree/bindings/mfd/tps65217.txt. > > The TPS65217 chip contains a boost converter and current sinks which can be > used to drive LEDs for use as backlights. > > Required properties: > -- compatible: "ti,tps65217" > -- reg: I2C slave address > +- compatible: "ti,tps65217-bl" > - backlight: node for specifying WLED1 and WLED2 lines in TPS65217 > - isel: selection bit, valid values: 1 for ISEL1 (low-level) and 2 for ISEL2 (high-level) > - fdim: PWM dimming frequency, valid values: 100, 200, 500, 1000 > @@ -15,13 +17,13 @@ Each regulator is defined using the standard binding for regulators. > > Example: > > - tps: tps@24 { > - reg = <0x24>; > - compatible = "ti,tps65217"; > - backlight { > - isel = <1>; /* 1 - ISET1, 2 ISET2 */ > - fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ > - default-brightness = <50>; > - }; > +&tps { > + backlight { > + compatible = "ti,tps65217-bl"; > + status = "okay"; > + isel = <1>; /* 1 - ISET1, 2 ISET2 */ > + fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ > + default-brightness = <50>; > }; > +}; > > diff --git a/Documentation/devicetree/bindings/mfd/tps65217.txt b/Documentation/devicetree/bindings/mfd/tps65217.txt > new file mode 100644 > index 0000000..40c84ba > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/tps65217.txt > @@ -0,0 +1,100 @@ > +Texas Instruments TPS65217 Single-Chip PMIC for Battery-Powered Systems > + > +Required properties: > +- compatible: "ti,tps65217" > +- reg: I2C slave address. > +- interrupt-controller: Marks the device node as an interrupt controller. > +- #interrupt-cells: The number of cells to describe an IRQ, this should be 1. > +- backlight: Child node that specify the backlight regulator sub-device. See: > + Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt > +- charger: Child node that specify the charger sub-device. See: > + Documentation/devicetree/bindings/power/supply/tps65217_charger.txt > +- pwrbutton: Child node that specify the power button sub-device. See: > + Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt > +- regulators: List of child nodes that specify the regulator initialization > + data. See: > + Documentation/devicetree/bindings/regulator/tps65217.txt. > + > +Optional properties: > +- ti,pmic-shutdown-controller: Telling the PMIC to shutdown on PWR_EN toggle. > + > +Example: > + > + tps: tps@24 { > + compatible = "ti,tps65217"; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + ti,pmic-shutdown-controller; > + > + backlight { > + compatible = "ti,tps65217-bl"; > + status = "disabled"; > + }; > + > + charger { > + compatible = "ti,tps65217-charger"; > + status = "disabled"; > + }; > + > + pwrbutton { > + compatible = "ti,tps65217-pwrbutton"; > + status = "disabled"; > + }; > + > + regulators { > + compatible = "ti,tps65217-pmic"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + dcdc1_reg: dcdc1 { > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + dcdc2_reg: dcdc2 { > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + dcdc3_reg: dcc3 { > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1500000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo1_reg: ldo1 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo2_reg: ldo2 { > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo3_reg: ldo3 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo4_reg: ldo4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > + > diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt > index 4f05d20..2d9b519 100644 > --- a/Documentation/devicetree/bindings/regulator/tps65217.txt > +++ b/Documentation/devicetree/bindings/regulator/tps65217.txt > @@ -1,8 +1,10 @@ > -TPS65217 family of regulators > +Texas Instruments TPS65217 family of regulators > + > +This module is part of the TPS65217. For more details about the whole > +TPS65217 chip see Documentation/devicetree/bindings/mfd/tps65217.txt. > > Required properties: > -- compatible: "ti,tps65217" > -- reg: I2C slave address > +- compatible: "ti,tps65217-pmic" > - regulators: list of regulators provided by this controller, must be named > after their hardware counterparts: dcdc[1-3] and ldo[1-4] > - regulators: This is the list of child nodes that specify the regulator regulators twice? Fix that while you're here. > -- > 2.9.3 >
Hello Rob, 2017-06-09 16:03 GMT+02:00 Rob Herring <robh@kernel.org>: > On Wed, Jun 07, 2017 at 12:32:39PM +0200, Enric Balletbo i Serra wrote: >> This patch adds a new binding documentation for the TPS65217 MFD and >> updates the documentation for all the sub-devices in accordance to get >> each individual sub-driver functioning correctly. > > Explain why breaking compatibility is okay. > We had some discussion in patch 4 that make me rethink a bit all this, please let me send a new version and continue the discussion there (now I'm not sure if I'll break the compatibility or not) But let me ask a question. The TPS65217 MFD has different sub-nodes (charger, backlight, pwrbutton, regulators) in DT, I suspect the answer is no, but is it ok that some of them were not described in the DT because there is nothing to configure? i.e: Have this because the resources of charger and pwrbutton are static so can be hard-coded in the driver &tps { compatible = "ti,tps65217"; interrupt-controller; #interrupt-cells = <1>; regulators { #address-cells = <1>; #size-cells = <0>; dcdc1_reg: regulator@0 { reg = <0>; ... }; }; instead of : &tps { compatible = "ti,tps65217"; interrupt-controller; #interrupt-cells = <1>; charger { compatible = "ti,tps65217-charger"; interrupts = <0>, <1>; interrupt-names = "USB", "AC"; }; pwrbutton { compatible = "ti,tps65217-pwrbutton"; interrupts = <2>; }; regulators { #address-cells = <1>; #size-cells = <0>; dcdc1_reg: regulator@0 { reg = <0>; ... }; }; Best regards, Enric >> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> >> --- >> .../bindings/input/tps65218-pwrbutton.txt | 2 +- >> .../bindings/leds/backlight/tps65217-backlight.txt | 24 ++--- >> Documentation/devicetree/bindings/mfd/tps65217.txt | 100 +++++++++++++++++++++ >> .../devicetree/bindings/regulator/tps65217.txt | 8 +- >> 4 files changed, 119 insertions(+), 15 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/mfd/tps65217.txt >> >> diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt >> index 8682ab6..603a3f0 100644 >> --- a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt >> +++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt >> @@ -1,7 +1,7 @@ >> Texas Instruments TPS65217 and TPS65218 power button >> >> This module is part of the TPS65217/TPS65218. For more details about the whole >> -TPS65217 chip see Documentation/devicetree/bindings/regulator/tps65217.txt. >> +TPS65217 chip see Documentation/devicetree/bindings/mfd/tps65217.txt. >> >> This driver provides a simple power button event via an Interrupt. >> >> diff --git a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt >> index 5fb9279..a1bc465 100644 >> --- a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt >> +++ b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt >> @@ -1,11 +1,13 @@ >> -TPS65217 family of regulators >> +Texas Instruments TPS65217 backlight regulator >> + >> +This module is part of the TPS65217. For more details about the whole >> +TPS65217 chip see Documentation/devicetree/bindings/mfd/tps65217.txt. >> >> The TPS65217 chip contains a boost converter and current sinks which can be >> used to drive LEDs for use as backlights. >> >> Required properties: >> -- compatible: "ti,tps65217" >> -- reg: I2C slave address >> +- compatible: "ti,tps65217-bl" >> - backlight: node for specifying WLED1 and WLED2 lines in TPS65217 >> - isel: selection bit, valid values: 1 for ISEL1 (low-level) and 2 for ISEL2 (high-level) >> - fdim: PWM dimming frequency, valid values: 100, 200, 500, 1000 >> @@ -15,13 +17,13 @@ Each regulator is defined using the standard binding for regulators. >> >> Example: >> >> - tps: tps@24 { >> - reg = <0x24>; >> - compatible = "ti,tps65217"; >> - backlight { >> - isel = <1>; /* 1 - ISET1, 2 ISET2 */ >> - fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ >> - default-brightness = <50>; >> - }; >> +&tps { >> + backlight { >> + compatible = "ti,tps65217-bl"; >> + status = "okay"; >> + isel = <1>; /* 1 - ISET1, 2 ISET2 */ >> + fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ >> + default-brightness = <50>; >> }; >> +}; >> >> diff --git a/Documentation/devicetree/bindings/mfd/tps65217.txt b/Documentation/devicetree/bindings/mfd/tps65217.txt >> new file mode 100644 >> index 0000000..40c84ba >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mfd/tps65217.txt >> @@ -0,0 +1,100 @@ >> +Texas Instruments TPS65217 Single-Chip PMIC for Battery-Powered Systems >> + >> +Required properties: >> +- compatible: "ti,tps65217" >> +- reg: I2C slave address. >> +- interrupt-controller: Marks the device node as an interrupt controller. >> +- #interrupt-cells: The number of cells to describe an IRQ, this should be 1. >> +- backlight: Child node that specify the backlight regulator sub-device. See: >> + Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt >> +- charger: Child node that specify the charger sub-device. See: >> + Documentation/devicetree/bindings/power/supply/tps65217_charger.txt >> +- pwrbutton: Child node that specify the power button sub-device. See: >> + Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt >> +- regulators: List of child nodes that specify the regulator initialization >> + data. See: >> + Documentation/devicetree/bindings/regulator/tps65217.txt. >> + >> +Optional properties: >> +- ti,pmic-shutdown-controller: Telling the PMIC to shutdown on PWR_EN toggle. >> + >> +Example: >> + >> + tps: tps@24 { >> + compatible = "ti,tps65217"; >> + interrupt-controller; >> + #interrupt-cells = <1>; >> + >> + ti,pmic-shutdown-controller; >> + >> + backlight { >> + compatible = "ti,tps65217-bl"; >> + status = "disabled"; >> + }; >> + >> + charger { >> + compatible = "ti,tps65217-charger"; >> + status = "disabled"; >> + }; >> + >> + pwrbutton { >> + compatible = "ti,tps65217-pwrbutton"; >> + status = "disabled"; >> + }; >> + >> + regulators { >> + compatible = "ti,tps65217-pmic"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + dcdc1_reg: dcdc1 { >> + regulator-min-microvolt = <900000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + dcdc2_reg: dcdc2 { >> + regulator-min-microvolt = <900000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + dcdc3_reg: dcc3 { >> + regulator-min-microvolt = <900000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + ldo1_reg: ldo1 { >> + regulator-min-microvolt = <1000000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + ldo2_reg: ldo2 { >> + regulator-min-microvolt = <900000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + ldo3_reg: ldo3 { >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + ldo4_reg: ldo4 { >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + }; >> + }; >> + >> diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt >> index 4f05d20..2d9b519 100644 >> --- a/Documentation/devicetree/bindings/regulator/tps65217.txt >> +++ b/Documentation/devicetree/bindings/regulator/tps65217.txt >> @@ -1,8 +1,10 @@ >> -TPS65217 family of regulators >> +Texas Instruments TPS65217 family of regulators >> + >> +This module is part of the TPS65217. For more details about the whole >> +TPS65217 chip see Documentation/devicetree/bindings/mfd/tps65217.txt. >> >> Required properties: >> -- compatible: "ti,tps65217" >> -- reg: I2C slave address >> +- compatible: "ti,tps65217-pmic" >> - regulators: list of regulators provided by this controller, must be named >> after their hardware counterparts: dcdc[1-3] and ldo[1-4] >> - regulators: This is the list of child nodes that specify the regulator > > regulators twice? Fix that while you're here. > Sure, I can add this change as well. >> -- >> 2.9.3 >>
On Fri, Jun 9, 2017 at 5:30 PM, Enric Balletbo Serra <eballetbo@gmail.com> wrote: > Hello Rob, > > 2017-06-09 16:03 GMT+02:00 Rob Herring <robh@kernel.org>: >> On Wed, Jun 07, 2017 at 12:32:39PM +0200, Enric Balletbo i Serra wrote: >>> This patch adds a new binding documentation for the TPS65217 MFD and >>> updates the documentation for all the sub-devices in accordance to get >>> each individual sub-driver functioning correctly. >> >> Explain why breaking compatibility is okay. >> > > We had some discussion in patch 4 that make me rethink a bit all this, > please let me send a new version and continue the discussion there > (now I'm not sure if I'll break the compatibility or not) > > But let me ask a question. The TPS65217 MFD has different sub-nodes > (charger, backlight, pwrbutton, regulators) in DT, I suspect the > answer is no, but is it ok that some of them were not described in the > DT because there is nothing to configure? But you are configuring the interrupts. I'm all for not creating nodes just for the purpose instantiating a driver (DT is not the only way to create platform devices) when the parent node is sufficient. We see both models, but we don't really want a mixture of both ways so I'd stick with the latter here. > i.e: Have this because the resources of charger and pwrbutton are > static so can be hard-coded in the driver > > &tps { > compatible = "ti,tps65217"; > interrupt-controller; > #interrupt-cells = <1>; > > regulators { > #address-cells = <1>; > #size-cells = <0>; > > dcdc1_reg: regulator@0 { > reg = <0>; > ... > }; > }; > > instead of : > > &tps { > compatible = "ti,tps65217"; > interrupt-controller; > #interrupt-cells = <1>; > > charger { > compatible = "ti,tps65217-charger"; > interrupts = <0>, <1>; > interrupt-names = "USB", "AC"; > }; > > pwrbutton { > compatible = "ti,tps65217-pwrbutton"; > interrupts = <2>; > }; > > regulators { > #address-cells = <1>; > #size-cells = <0>; > > dcdc1_reg: regulator@0 { > reg = <0>; > ... > }; > };
diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt index 8682ab6..603a3f0 100644 --- a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt +++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt @@ -1,7 +1,7 @@ Texas Instruments TPS65217 and TPS65218 power button This module is part of the TPS65217/TPS65218. For more details about the whole -TPS65217 chip see Documentation/devicetree/bindings/regulator/tps65217.txt. +TPS65217 chip see Documentation/devicetree/bindings/mfd/tps65217.txt. This driver provides a simple power button event via an Interrupt. diff --git a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt index 5fb9279..a1bc465 100644 --- a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt +++ b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt @@ -1,11 +1,13 @@ -TPS65217 family of regulators +Texas Instruments TPS65217 backlight regulator + +This module is part of the TPS65217. For more details about the whole +TPS65217 chip see Documentation/devicetree/bindings/mfd/tps65217.txt. The TPS65217 chip contains a boost converter and current sinks which can be used to drive LEDs for use as backlights. Required properties: -- compatible: "ti,tps65217" -- reg: I2C slave address +- compatible: "ti,tps65217-bl" - backlight: node for specifying WLED1 and WLED2 lines in TPS65217 - isel: selection bit, valid values: 1 for ISEL1 (low-level) and 2 for ISEL2 (high-level) - fdim: PWM dimming frequency, valid values: 100, 200, 500, 1000 @@ -15,13 +17,13 @@ Each regulator is defined using the standard binding for regulators. Example: - tps: tps@24 { - reg = <0x24>; - compatible = "ti,tps65217"; - backlight { - isel = <1>; /* 1 - ISET1, 2 ISET2 */ - fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ - default-brightness = <50>; - }; +&tps { + backlight { + compatible = "ti,tps65217-bl"; + status = "okay"; + isel = <1>; /* 1 - ISET1, 2 ISET2 */ + fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ + default-brightness = <50>; }; +}; diff --git a/Documentation/devicetree/bindings/mfd/tps65217.txt b/Documentation/devicetree/bindings/mfd/tps65217.txt new file mode 100644 index 0000000..40c84ba --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/tps65217.txt @@ -0,0 +1,100 @@ +Texas Instruments TPS65217 Single-Chip PMIC for Battery-Powered Systems + +Required properties: +- compatible: "ti,tps65217" +- reg: I2C slave address. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: The number of cells to describe an IRQ, this should be 1. +- backlight: Child node that specify the backlight regulator sub-device. See: + Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt +- charger: Child node that specify the charger sub-device. See: + Documentation/devicetree/bindings/power/supply/tps65217_charger.txt +- pwrbutton: Child node that specify the power button sub-device. See: + Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt +- regulators: List of child nodes that specify the regulator initialization + data. See: + Documentation/devicetree/bindings/regulator/tps65217.txt. + +Optional properties: +- ti,pmic-shutdown-controller: Telling the PMIC to shutdown on PWR_EN toggle. + +Example: + + tps: tps@24 { + compatible = "ti,tps65217"; + interrupt-controller; + #interrupt-cells = <1>; + + ti,pmic-shutdown-controller; + + backlight { + compatible = "ti,tps65217-bl"; + status = "disabled"; + }; + + charger { + compatible = "ti,tps65217-charger"; + status = "disabled"; + }; + + pwrbutton { + compatible = "ti,tps65217-pwrbutton"; + status = "disabled"; + }; + + regulators { + compatible = "ti,tps65217-pmic"; + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: dcdc1 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2_reg: dcdc2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: dcc3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt index 4f05d20..2d9b519 100644 --- a/Documentation/devicetree/bindings/regulator/tps65217.txt +++ b/Documentation/devicetree/bindings/regulator/tps65217.txt @@ -1,8 +1,10 @@ -TPS65217 family of regulators +Texas Instruments TPS65217 family of regulators + +This module is part of the TPS65217. For more details about the whole +TPS65217 chip see Documentation/devicetree/bindings/mfd/tps65217.txt. Required properties: -- compatible: "ti,tps65217" -- reg: I2C slave address +- compatible: "ti,tps65217-pmic" - regulators: list of regulators provided by this controller, must be named after their hardware counterparts: dcdc[1-3] and ldo[1-4] - regulators: This is the list of child nodes that specify the regulator
This patch adds a new binding documentation for the TPS65217 MFD and updates the documentation for all the sub-devices in accordance to get each individual sub-driver functioning correctly. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> --- .../bindings/input/tps65218-pwrbutton.txt | 2 +- .../bindings/leds/backlight/tps65217-backlight.txt | 24 ++--- Documentation/devicetree/bindings/mfd/tps65217.txt | 100 +++++++++++++++++++++ .../devicetree/bindings/regulator/tps65217.txt | 8 +- 4 files changed, 119 insertions(+), 15 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/tps65217.txt