| Message ID | 20170608092653.25221-9-antoine.tenart@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index 037ed30d75a7..ab728aacdfae 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -98,6 +98,14 @@ clocks = <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>; }; + cpm_xmdio: mdio@12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x12a600 0x10>; + status = "disabled"; + }; + cpm_icu: interrupt-controller@1e0000 { compatible = "marvell,cp110-icu"; reg = <0x1e0000 0x10>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 2a99ff8fca2a..89af7a31e622 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -103,6 +103,14 @@ clocks = <&cps_syscon0 1 9>, <&cps_syscon0 1 5>; }; + cps_xmdio: mdio@12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x12a600 0x10>; + status = "disabled"; + }; + cps_icu: interrupt-controller@1e0000 { compatible = "marvell,cp110-icu"; reg = <0x1e0000 0x10>;
Add the description of the xMDIO bus for the Marvell Armada 7k and Marvell Armada 8k; for both CP110 slave and master. This bus is found on Marvell Ethernet controllers and provides an interface with the xMDIO bus. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> --- @Dave: patch 8 should go through the mvebu tree as asked by Gregory, thanks! arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 8 ++++++++ arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 8 ++++++++ 2 files changed, 16 insertions(+)