@@ -145,6 +145,20 @@
};
};
};
+
+ wlan_en: wlan-en-1-8v {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ /* GPIO_051_WIFI_EN */
+ gpio = <&gpio6 3 0>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
};
&i2c0 {
@@ -208,3 +222,22 @@
vqmmc-supply = <&ldo9>;
status = "okay";
};
+
+&dwmmc2 { /* WIFI */
+ broken-cd;
+ /* WL_EN */
+ vmmc-supply = <&wlan_en>;
+ ti,non-removable;
+ non-removable;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "ok";
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>; /* sdio func num */
+ /* WL_IRQ, GPIO_179_WL_WAKEUP_AP */
+ interrupt-parent = <&gpio22>;
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+ };
+};
Add nodes for WiFi. HiKey960 is using TI WL1837MOD module. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> --- arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 33 +++++++++++++++++++++++ 1 file changed, 33 insertions(+)