@@ -51,7 +51,6 @@
compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
aliases {
- ethernet0 = &emac;
serial0 = &uart0;
serial1 = &uart1;
};
@@ -70,15 +69,6 @@
status = "okay";
};
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii";
- phy-handle = <&ext_rgmii_phy>;
- phy-supply = <®_dc1sw>;
- status = "okay";
-};
-
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
@@ -89,13 +79,6 @@
bias-pull-up;
};
-&mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
@@ -48,18 +48,3 @@
/* TODO: Camera, touchscreen, etc. */
};
-
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii";
- phy-handle = <&ext_rgmii_phy>;
- status = "okay";
-};
-
-&mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
@@ -51,7 +51,6 @@
compatible = "pine64,pine64", "allwinner,sun50i-a64";
aliases {
- ethernet0 = &emac;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -79,16 +78,6 @@
status = "okay";
};
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&rmii_pins>;
- phy-mode = "rmii";
- phy-handle = <&ext_rmii_phy1>;
- phy-supply = <®_dc1sw>;
- status = "okay";
-
-};
-
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
@@ -99,13 +88,6 @@
bias-pull-up;
};
-&mdio {
- ext_rmii_phy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
@@ -53,7 +53,6 @@
"allwinner,sun50i-a64";
aliases {
- ethernet0 = &emac;
serial0 = &uart0;
};
@@ -77,22 +76,6 @@
status = "okay";
};
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii";
- phy-handle = <&ext_rgmii_phy>;
- phy-supply = <®_dc1sw>;
- status = "okay";
-};
-
-&mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
@@ -449,26 +449,6 @@
#size-cells = <0>;
};
- emac: ethernet@1c30000 {
- compatible = "allwinner,sun50i-a64-emac";
- syscon = <&syscon>;
- reg = <0x01c30000 0x10000>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC>;
- reset-names = "stmmaceth";
- clocks = <&ccu CLK_BUS_EMAC>;
- clock-names = "stmmaceth";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
-
- mdio: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
@@ -50,7 +50,6 @@
compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
aliases {
- ethernet0 = &emac;
serial0 = &uart0;
};
@@ -109,22 +108,6 @@
status = "okay";
};
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <®_gmac_3v3>;
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
- status = "okay";
-};
-
-&mdio {
- ext_rgmii_phy: ethernet-phy@7 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <7>;
- };
-};
-
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
@@ -59,7 +59,6 @@
};
aliases {
- ethernet0 = &emac;
serial0 = &uart0;
};
@@ -137,28 +136,12 @@
status = "okay";
};
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <®_gmac_3v3>;
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
- status = "okay";
-};
-
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
-&mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
@@ -54,7 +54,6 @@
compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
aliases {
- ethernet0 = &emac;
serial0 = &uart0;
};
@@ -144,28 +143,12 @@
status = "okay";
};
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <®_gmac_3v3>;
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
- status = "okay";
-};
-
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
-&mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
Since the discussion is not settled yet for the EMAC, and that the release in getting really close, let's revert the changes for now, and we'll reintroduce them later. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- .../boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 17 ----------------- .../boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 15 --------------- arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 18 ------------------ .../dts/allwinner/sun50i-a64-sopine-baseboard.dts | 17 ----------------- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 20 -------------------- .../boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts | 17 ----------------- .../boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts | 17 ----------------- .../boot/dts/allwinner/sun50i-h5-orangepi-prime.dts | 17 ----------------- 8 files changed, 138 deletions(-)