diff mbox

[v5,01/10] arm64: dts: allwinner: Restore EMAC changes

Message ID 20170908071156.5115-2-clabbe.montjoie@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Corentin Labbe Sept. 8, 2017, 7:11 a.m. UTC 
This patch restore arm64 DT about dwmac-sun8i
This reverts commit 87e1f5e8bb4b ("arm64: dts: allwinner: Revert EMAC changes")

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 .../boot/dts/allwinner/sun50i-a64-bananapi-m64.dts   | 16 ++++++++++++++++
 .../boot/dts/allwinner/sun50i-a64-pine64-plus.dts    | 15 +++++++++++++++
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts  | 17 +++++++++++++++++
 .../dts/allwinner/sun50i-a64-sopine-baseboard.dts    | 16 ++++++++++++++++
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi        | 20 ++++++++++++++++++++
 .../boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts     | 17 +++++++++++++++++
 .../boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts    | 17 +++++++++++++++++
 .../boot/dts/allwinner/sun50i-h5-orangepi-prime.dts  | 17 +++++++++++++++++
 8 files changed, 135 insertions(+)

Comments

Maxime Ripard Sept. 8, 2017, 7:19 a.m. UTC | #1 
On Fri, Sep 08, 2017 at 09:11:47AM +0200, Corentin Labbe wrote:
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
> index 1c2387bd5df6..968908761194 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
> @@ -50,6 +50,7 @@
>  	compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
>  
>  	aliases {
> +		ethernet0 = &emac;
>  		serial0 = &uart0;
>  	};
>  
> @@ -108,6 +109,22 @@
>  	status = "okay";
>  };
>  
> +&emac {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&emac_rgmii_pins>;
> +	phy-supply = <&reg_gmac_3v3>;
> +	phy-handle = <&ext_rgmii_phy>;
> +	phy-mode = "rgmii";
> +	status = "okay";
> +};
> +
> +&mdio {
> +	ext_rgmii_phy: ethernet-phy@7 {
> +		compatible = "ethernet-phy-ieee802.3-c22";
> +		reg = <7>;
> +	};
> +};
> +

This won't compile, you don't have that node in the H5 DTSI.

Maxime
Corentin Labbe Sept. 8, 2017, 7:36 a.m. UTC | #2 
On Fri, Sep 08, 2017 at 09:19:54AM +0200, Maxime Ripard wrote:
> On Fri, Sep 08, 2017 at 09:11:47AM +0200, Corentin Labbe wrote:
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
> > index 1c2387bd5df6..968908761194 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
> > @@ -50,6 +50,7 @@
> >  	compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
> >  
> >  	aliases {
> > +		ethernet0 = &emac;
> >  		serial0 = &uart0;
> >  	};
> >  
> > @@ -108,6 +109,22 @@
> >  	status = "okay";
> >  };
> >  
> > +&emac {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&emac_rgmii_pins>;
> > +	phy-supply = <&reg_gmac_3v3>;
> > +	phy-handle = <&ext_rgmii_phy>;
> > +	phy-mode = "rgmii";
> > +	status = "okay";
> > +};
> > +
> > +&mdio {
> > +	ext_rgmii_phy: ethernet-phy@7 {
> > +		compatible = "ethernet-phy-ieee802.3-c22";
> > +		reg = <7>;
> > +	};
> > +};
> > +
> 
> This won't compile, you don't have that node in the H5 DTSI.
> 

Since H5 DTSI include arm/sunxi-h3-h5.dtsi it compiles.
Furthermore, I restested just now and confirm, it compiles fine.

Regards
Chen-Yu Tsai Sept. 8, 2017, 7:39 a.m. UTC | #3 
On Fri, Sep 8, 2017 at 3:36 PM, Corentin Labbe
<clabbe.montjoie@gmail.com> wrote:
> On Fri, Sep 08, 2017 at 09:19:54AM +0200, Maxime Ripard wrote:
>> On Fri, Sep 08, 2017 at 09:11:47AM +0200, Corentin Labbe wrote:
>> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
>> > index 1c2387bd5df6..968908761194 100644
>> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
>> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
>> > @@ -50,6 +50,7 @@
>> >     compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
>> >
>> >     aliases {
>> > +           ethernet0 = &emac;
>> >             serial0 = &uart0;
>> >     };
>> >
>> > @@ -108,6 +109,22 @@
>> >     status = "okay";
>> >  };
>> >
>> > +&emac {
>> > +   pinctrl-names = "default";
>> > +   pinctrl-0 = <&emac_rgmii_pins>;
>> > +   phy-supply = <&reg_gmac_3v3>;
>> > +   phy-handle = <&ext_rgmii_phy>;
>> > +   phy-mode = "rgmii";
>> > +   status = "okay";
>> > +};
>> > +
>> > +&mdio {
>> > +   ext_rgmii_phy: ethernet-phy@7 {
>> > +           compatible = "ethernet-phy-ieee802.3-c22";
>> > +           reg = <7>;
>> > +   };
>> > +};
>> > +
>>
>> This won't compile, you don't have that node in the H5 DTSI.
>>
>
> Since H5 DTSI include arm/sunxi-h3-h5.dtsi it compiles.
> Furthermore, I restested just now and confirm, it compiles fine.

The order of your patches are wrong. No individual patch should
introduce build failures, not just the whole patch series.

ChenYu
Corentin Labbe Sept. 10, 2017, 6:56 p.m. UTC | #4 
On Fri, Sep 08, 2017 at 03:39:04PM +0800, Chen-Yu Tsai wrote:
> On Fri, Sep 8, 2017 at 3:36 PM, Corentin Labbe
> <clabbe.montjoie@gmail.com> wrote:
> > On Fri, Sep 08, 2017 at 09:19:54AM +0200, Maxime Ripard wrote:
> >> On Fri, Sep 08, 2017 at 09:11:47AM +0200, Corentin Labbe wrote:
> >> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
> >> > index 1c2387bd5df6..968908761194 100644
> >> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
> >> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
> >> > @@ -50,6 +50,7 @@
> >> >     compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
> >> >
> >> >     aliases {
> >> > +           ethernet0 = &emac;
> >> >             serial0 = &uart0;
> >> >     };
> >> >
> >> > @@ -108,6 +109,22 @@
> >> >     status = "okay";
> >> >  };
> >> >
> >> > +&emac {
> >> > +   pinctrl-names = "default";
> >> > +   pinctrl-0 = <&emac_rgmii_pins>;
> >> > +   phy-supply = <&reg_gmac_3v3>;
> >> > +   phy-handle = <&ext_rgmii_phy>;
> >> > +   phy-mode = "rgmii";
> >> > +   status = "okay";
> >> > +};
> >> > +
> >> > +&mdio {
> >> > +   ext_rgmii_phy: ethernet-phy@7 {
> >> > +           compatible = "ethernet-phy-ieee802.3-c22";
> >> > +           reg = <7>;
> >> > +   };
> >> > +};
> >> > +
> >>
> >> This won't compile, you don't have that node in the H5 DTSI.
> >>
> >
> > Since H5 DTSI include arm/sunxi-h3-h5.dtsi it compiles.
> > Furthermore, I restested just now and confirm, it compiles fine.
> 
> The order of your patches are wrong. No individual patch should
> introduce build failures, not just the whole patch series.
> 

Yes, I just miss-understood the reason of build failure.
I will fix the order in the next serie.

Thanks
Corentin Labbe
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index d347f52e27f6..45bdbfb96126 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -51,6 +51,7 @@ 
 	compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 		serial1 = &uart1;
 	};
@@ -69,6 +70,14 @@ 
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -79,6 +88,13 @@ 
 	bias-pull-up;
 };
 
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
index f82ccf332c0f..24f1aac366d6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -48,3 +48,18 @@ 
 
 	/* TODO: Camera, touchscreen, etc. */
 };
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index caf8b6fbe5e3..6f209bb10a2f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -51,6 +51,7 @@ 
 	compatible = "pine64,pine64", "allwinner,sun50i-a64";
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -78,6 +79,15 @@ 
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&ext_rmii_phy1>;
+	status = "okay";
+
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -88,6 +98,13 @@ 
 	bias-pull-up;
 };
 
+&mdio {
+	ext_rmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index 17ccc12b58df..0eb2acedf8c3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -53,6 +53,7 @@ 
 		     "allwinner,sun50i-a64";
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -76,6 +77,21 @@ 
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 75e8d3182535..4dd9ffef0d80 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -461,6 +461,26 @@ 
 			#size-cells = <0>;
 		};
 
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun50i-a64-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
index 1c2387bd5df6..968908761194 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -50,6 +50,7 @@ 
 	compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -108,6 +109,22 @@ 
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index 4f77c8470f6c..a8296feee884 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -59,6 +59,7 @@ 
 	};
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -136,12 +137,28 @@ 
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
 	status = "okay";
 };
 
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index 6be06873e5af..d906b302cbcd 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -54,6 +54,7 @@ 
 	compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -143,12 +144,28 @@ 
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
 	status = "okay";
 };
 
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;