@@ -178,7 +178,7 @@
#size-cells = <0>;
};
- usb_otg: usb@01c19000 {
+ usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
clocks = <&ccu CLK_BUS_OTG>;
@@ -191,7 +191,7 @@
status = "disabled";
};
- usbphy: phy@01c19400 {
+ usbphy: phy@1c19400 {
compatible = "allwinner,sun50i-a64-usb-phy";
reg = <0x01c19400 0x14>,
<0x01c1a800 0x4>,
@@ -211,7 +211,7 @@
#phy-cells = <1>;
};
- ehci0: usb@01c1a000 {
+ ehci0: usb@1c1a000 {
compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@@ -223,7 +223,7 @@
status = "disabled";
};
- ohci0: usb@01c1a400 {
+ ohci0: usb@1c1a400 {
compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -233,7 +233,7 @@
status = "disabled";
};
- ehci1: usb@01c1b000 {
+ ehci1: usb@1c1b000 {
compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -247,7 +247,7 @@
status = "disabled";
};
- ohci1: usb@01c1b400 {
+ ohci1: usb@1c1b400 {
compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
reg = <0x01c1b400 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -259,7 +259,7 @@
status = "disabled";
};
- ccu: clock@01c20000 {
+ ccu: clock@1c20000 {
compatible = "allwinner,sun50i-a64-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
@@ -486,7 +486,7 @@
#reset-cells = <1>;
};
- r_pio: pinctrl@01f02c00 {
+ r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun50i-a64-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -19,7 +19,7 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu@000 {
+ cpu@0 {
device_type = "cpu";
compatible = "apm,strega", "arm,armv8";
reg = <0x0 0x000>;
@@ -29,7 +29,7 @@
#clock-cells = <1>;
clocks = <&pmd0clk 0>;
};
- cpu@001 {
+ cpu@1 {
device_type = "cpu";
compatible = "apm,strega", "arm,armv8";
reg = <0x0 0x001>;
@@ -125,7 +125,7 @@
<0x0 0x780a0000 0x0 0x20000>, /* GIC CPU */
<0x0 0x780c0000 0x0 0x10000>, /* GIC VCPU Control */
<0x0 0x780e0000 0x0 0x20000>; /* GIC VCPU */
- v2m0: v2m@00000 {
+ v2m0: v2m@0 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x0 0x0 0x1000>;
@@ -19,7 +19,7 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu@000 {
+ cpu@0 {
device_type = "cpu";
compatible = "apm,potenza", "arm,armv8";
reg = <0x0 0x000>;
@@ -27,7 +27,7 @@
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_0>;
};
- cpu@001 {
+ cpu@1 {
device_type = "cpu";
compatible = "apm,potenza", "arm,armv8";
reg = <0x0 0x001>;
@@ -97,7 +97,7 @@
timeout-sec = <30>;
};
- smb@08000000 {
+ smb@8000000 {
compatible = "arm,vexpress,v2m-p1", "simple-bus";
arm,v2m-memory-map = "rs1";
#address-cells = <2>; /* SMB chipselect number and offset */
@@ -189,12 +189,12 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysreg: sysreg@010000 {
+ v2m_sysreg: sysreg@10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
};
- v2m_serial0: uart@090000 {
+ v2m_serial0: uart@90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <5>;
@@ -202,7 +202,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart@0a0000 {
+ v2m_serial1: uart@a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <6>;
@@ -210,7 +210,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart@0b0000 {
+ v2m_serial2: uart@b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <7>;
@@ -218,7 +218,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart@0c0000 {
+ v2m_serial3: uart@c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <8>;
@@ -226,7 +226,7 @@
clock-names = "uartclk", "apb_pclk";
};
- virtio-block@0130000 {
+ virtio-block@130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x200>;
interrupts = <42>;
@@ -104,7 +104,7 @@
<0 63 4>;
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
@@ -60,14 +60,14 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysreg: sysreg@010000 {
+ v2m_sysreg: sysreg@10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
- v2m_sysctl: sysctl@020000 {
+ v2m_sysctl: sysctl@20000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
@@ -78,7 +78,7 @@
assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
};
- aaci@040000 {
+ aaci@40000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x040000 0x1000>;
interrupts = <11>;
@@ -86,7 +86,7 @@
clock-names = "apb_pclk";
};
- mmci@050000 {
+ mmci@50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <9 10>;
@@ -98,7 +98,7 @@
clock-names = "mclk", "apb_pclk";
};
- kmi@060000 {
+ kmi@60000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x060000 0x1000>;
interrupts = <12>;
@@ -106,7 +106,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- kmi@070000 {
+ kmi@70000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x070000 0x1000>;
interrupts = <13>;
@@ -114,7 +114,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- v2m_serial0: uart@090000 {
+ v2m_serial0: uart@90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <5>;
@@ -122,7 +122,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart@0a0000 {
+ v2m_serial1: uart@a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <6>;
@@ -130,7 +130,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart@0b0000 {
+ v2m_serial2: uart@b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <7>;
@@ -138,7 +138,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart@0c0000 {
+ v2m_serial3: uart@c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <8>;
@@ -146,7 +146,7 @@
clock-names = "uartclk", "apb_pclk";
};
- wdt@0f0000 {
+ wdt@f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0>;
@@ -219,7 +219,7 @@
};
};
- virtio-block@0130000 {
+ virtio-block@130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x200>;
interrupts = <42>;
@@ -128,7 +128,7 @@
};
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
@@ -114,7 +114,7 @@
reg = <0x04000000 0x06400000>; /* 100MB */
};
- partition@0a400000{
+ partition@a400000{
label = "ncustfs";
reg = <0x0a400000 0x35c00000>; /* 860MB */
};
@@ -77,7 +77,7 @@
next-level-cache = <&CLUSTER0_L2>;
};
- CLUSTER0_L2: l2-cache@000 {
+ CLUSTER0_L2: l2-cache@0 {
compatible = "cache";
};
};
@@ -367,7 +367,7 @@
#size-cells = <1>;
ranges = <0 0x652e0000 0x80000>;
- v2m0: v2m@00000 {
+ v2m0: v2m@0 {
compatible = "arm,gic-v2m-frame";
interrupt-parent = <&gic>;
msi-controller;
@@ -46,7 +46,7 @@
clock-mult = <1>;
};
- genpll0: genpll0@0001d104 {
+ genpll0: genpll0@1d104 {
#clock-cells = <1>;
compatible = "brcm,sr-genpll0";
reg = <0x0001d104 0x32>,
@@ -58,7 +58,7 @@
"clk_paxc_axi";
};
- genpll3: genpll3@0001d1e0 {
+ genpll3: genpll3@1d1e0 {
#clock-cells = <1>;
compatible = "brcm,sr-genpll3";
reg = <0x0001d1e0 0x32>,
@@ -68,7 +68,7 @@
"clk_sdio";
};
- genpll4: genpll4@0001d214 {
+ genpll4: genpll4@1d214 {
#clock-cells = <1>;
compatible = "brcm,sr-genpll4";
reg = <0x0001d214 0x32>,
@@ -80,7 +80,7 @@
"clk_bridge_fscpu";
};
- genpll5: genpll5@0001d248 {
+ genpll5: genpll5@1d248 {
#clock-cells = <1>;
compatible = "brcm,sr-genpll5";
reg = <0x0001d248 0x32>,
@@ -90,7 +90,7 @@
"crypto_ae_clk", "raid_ae_clk";
};
- lcpll0: lcpll0@0001d0c4 {
+ lcpll0: lcpll0@1d0c4 {
#clock-cells = <1>;
compatible = "brcm,sr-lcpll0";
reg = <0x0001d0c4 0x3c>,
@@ -101,7 +101,7 @@
"clk_sata_500";
};
- lcpll1: lcpll1@0001d138 {
+ lcpll1: lcpll1@1d138 {
#clock-cells = <1>;
compatible = "brcm,sr-lcpll1";
reg = <0x0001d138 0x3c>,
@@ -36,7 +36,7 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x67000000 0x00800000>;
- crypto_mbox: crypto_mbox@00000000 {
+ crypto_mbox: crypto_mbox@0 {
compatible = "brcm,iproc-flexrm-mbox";
reg = <0x00000000 0x200000>;
msi-parent = <&gic_its 0x4100>;
@@ -44,7 +44,7 @@
dma-coherent;
};
- raid_mbox: raid_mbox@00400000 {
+ raid_mbox: raid_mbox@400000 {
compatible = "brcm,iproc-flexrm-mbox";
reg = <0x00400000 0x200000>;
dma-coherent;
@@ -32,7 +32,7 @@
#include <dt-bindings/pinctrl/brcm,pinctrl-stingray.h>
- pinconf: pinconf@00140000 {
+ pinconf: pinconf@140000 {
compatible = "pinconf-single";
reg = <0x00140000 0x250>;
pinctrl-single,register-width = <32>;
@@ -40,7 +40,7 @@
/* pinconf functions */
};
- pinmux: pinmux@0014029c {
+ pinmux: pinmux@14029c {
compatible = "pinctrl-single";
reg = <0x0014029c 0x250>;
#address-cells = <1>;
@@ -36,7 +36,7 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x67d00000 0x00800000>;
- sata0: ahci@00210000 {
+ sata0: ahci@210000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00210000 0x1000>;
reg-names = "ahci";
@@ -52,7 +52,7 @@
};
};
- sata_phy0: sata_phy@00212100 {
+ sata_phy0: sata_phy@212100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00212100 0x1000>;
reg-names = "phy";
@@ -66,7 +66,7 @@
};
};
- sata1: ahci@00310000 {
+ sata1: ahci@310000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00310000 0x1000>;
reg-names = "ahci";
@@ -82,7 +82,7 @@
};
};
- sata_phy1: sata_phy@00312100 {
+ sata_phy1: sata_phy@312100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00312100 0x1000>;
reg-names = "phy";
@@ -96,7 +96,7 @@
};
};
- sata2: ahci@00120000 {
+ sata2: ahci@120000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00120000 0x1000>;
reg-names = "ahci";
@@ -112,7 +112,7 @@
};
};
- sata_phy2: sata_phy@00122100 {
+ sata_phy2: sata_phy@122100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00122100 0x1000>;
reg-names = "phy";
@@ -126,7 +126,7 @@
};
};
- sata3: ahci@00130000 {
+ sata3: ahci@130000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00130000 0x1000>;
reg-names = "ahci";
@@ -142,7 +142,7 @@
};
};
- sata_phy3: sata_phy@00132100 {
+ sata_phy3: sata_phy@132100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00132100 0x1000>;
reg-names = "phy";
@@ -156,7 +156,7 @@
};
};
- sata4: ahci@00330000 {
+ sata4: ahci@330000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00330000 0x1000>;
reg-names = "ahci";
@@ -172,7 +172,7 @@
};
};
- sata_phy4: sata_phy@00332100 {
+ sata_phy4: sata_phy@332100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00332100 0x1000>;
reg-names = "phy";
@@ -186,7 +186,7 @@
};
};
- sata5: ahci@00400000 {
+ sata5: ahci@400000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00400000 0x1000>;
reg-names = "ahci";
@@ -202,7 +202,7 @@
};
};
- sata_phy5: sata_phy@00402100 {
+ sata_phy5: sata_phy@402100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00402100 0x1000>;
reg-names = "phy";
@@ -216,7 +216,7 @@
};
};
- sata6: ahci@00410000 {
+ sata6: ahci@410000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00410000 0x1000>;
reg-names = "ahci";
@@ -232,7 +232,7 @@
};
};
- sata_phy6: sata_phy@00412100 {
+ sata_phy6: sata_phy@412100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00412100 0x1000>;
reg-names = "phy";
@@ -246,7 +246,7 @@
};
};
- sata7: ahci@00420000 {
+ sata7: ahci@420000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00420000 0x1000>;
reg-names = "ahci";
@@ -262,7 +262,7 @@
};
};
- sata_phy7: sata_phy@00422100 {
+ sata_phy7: sata_phy@422100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00422100 0x1000>;
reg-names = "phy";
@@ -42,7 +42,7 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu@000 {
+ cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x0 0x0>;
@@ -50,7 +50,7 @@
next-level-cache = <&CLUSTER0_L2>;
};
- cpu@001 {
+ cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x0 0x1>;
@@ -106,7 +106,7 @@
next-level-cache = <&CLUSTER3_L2>;
};
- CLUSTER0_L2: l2-cache@000 {
+ CLUSTER0_L2: l2-cache@0 {
compatible = "cache";
};
@@ -152,13 +152,13 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x61000000 0x05000000>;
- ccn: ccn@00000000 {
+ ccn: ccn@0 {
compatible = "arm,ccn-502";
reg = <0x00000000 0x900000>;
interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
};
- gic: interrupt-controller@02c00000 {
+ gic: interrupt-controller@2c00000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
#address-cells = <1>;
@@ -177,7 +177,7 @@
};
};
- smmu: mmu@03000000 {
+ smmu: mmu@3000000 {
compatible = "arm,mmu-500";
reg = <0x03000000 0x80000>;
#global-interrupts = <1>;
@@ -258,7 +258,7 @@
#include "stingray-clock.dtsi"
- gpio_crmu: gpio@00024800 {
+ gpio_crmu: gpio@24800 {
compatible = "brcm,iproc-gpio";
reg = <0x00024800 0x4c>;
ngpios = <6>;
@@ -278,7 +278,7 @@
#include "stingray-pinctrl.dtsi"
- mdio_mux_iproc: mdio-mux@0002023c {
+ mdio_mux_iproc: mdio-mux@2023c {
compatible = "brcm,mdio-mux-iproc";
reg = <0x0002023c 0x14>;
#address-cells = <1>;
@@ -309,7 +309,7 @@
};
};
- pwm: pwm@00010000 {
+ pwm: pwm@10000 {
compatible = "brcm,iproc-pwm";
reg = <0x00010000 0x1000>;
clocks = <&crmu_ref25m>;
@@ -317,7 +317,7 @@
status = "disabled";
};
- timer0: timer@00030000 {
+ timer0: timer@30000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00030000 0x1000>;
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
@@ -328,7 +328,7 @@
status = "disabled";
};
- timer1: timer@00040000 {
+ timer1: timer@40000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00040000 0x1000>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
@@ -338,7 +338,7 @@
clock-names = "timer1", "timer2", "apb_pclk";
};
- timer2: timer@00050000 {
+ timer2: timer@50000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00050000 0x1000>;
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
@@ -349,7 +349,7 @@
status = "disabled";
};
- timer3: timer@00060000 {
+ timer3: timer@60000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00060000 0x1000>;
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
@@ -360,7 +360,7 @@
status = "disabled";
};
- timer4: timer@00070000 {
+ timer4: timer@70000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00070000 0x1000>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
@@ -371,7 +371,7 @@
status = "disabled";
};
- timer5: timer@00080000 {
+ timer5: timer@80000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00080000 0x1000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
@@ -382,7 +382,7 @@
status = "disabled";
};
- timer6: timer@00090000 {
+ timer6: timer@90000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00090000 0x1000>;
interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
@@ -393,7 +393,7 @@
status = "disabled";
};
- timer7: timer@000a0000 {
+ timer7: timer@a0000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x000a0000 0x1000>;
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
@@ -404,7 +404,7 @@
status = "disabled";
};
- i2c0: i2c@000b0000 {
+ i2c0: i2c@b0000 {
compatible = "brcm,iproc-i2c";
reg = <0x000b0000 0x100>;
#address-cells = <1>;
@@ -414,7 +414,7 @@
status = "disabled";
};
- wdt0: watchdog@000c0000 {
+ wdt0: watchdog@c0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x000c0000 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
@@ -422,7 +422,7 @@
clock-names = "wdogclk", "apb_pclk";
};
- gpio_hsls: gpio@000d0000 {
+ gpio_hsls: gpio@d0000 {
compatible = "brcm,iproc-gpio";
reg = <0x000d0000 0x864>;
ngpios = <151>;
@@ -448,7 +448,7 @@
<&pinmux 151 91 4>;
};
- i2c1: i2c@000e0000 {
+ i2c1: i2c@e0000 {
compatible = "brcm,iproc-i2c";
reg = <0x000e0000 0x100>;
#address-cells = <1>;
@@ -458,7 +458,7 @@
status = "disabled";
};
- uart0: uart@00100000 {
+ uart0: uart@100000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00100000 0x1000>;
@@ -469,7 +469,7 @@
status = "disabled";
};
- uart1: uart@00110000 {
+ uart1: uart@110000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00110000 0x1000>;
@@ -480,7 +480,7 @@
status = "disabled";
};
- uart2: uart@00120000 {
+ uart2: uart@120000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00120000 0x1000>;
@@ -491,7 +491,7 @@
status = "disabled";
};
- uart3: uart@00130000 {
+ uart3: uart@130000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00130000 0x1000>;
@@ -502,7 +502,7 @@
status = "disabled";
};
- ssp0: ssp@00180000 {
+ ssp0: ssp@180000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00180000 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
@@ -514,7 +514,7 @@
status = "disabled";
};
- ssp1: ssp@00190000 {
+ ssp1: ssp@190000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00190000 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
@@ -526,12 +526,12 @@
status = "disabled";
};
- hwrng: hwrng@00220000 {
+ hwrng: hwrng@220000 {
compatible = "brcm,iproc-rng200";
reg = <0x00220000 0x28>;
};
- dma0: dma@00310000 {
+ dma0: dma@310000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x00310000 0x1000>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
@@ -551,7 +551,7 @@
iommus = <&smmu 0x6000 0x0000>;
};
- enet: ethernet@00340000{
+ enet: ethernet@340000{
compatible = "brcm,amac";
reg = <0x00340000 0x1000>;
reg-names = "amac_base";
@@ -560,7 +560,7 @@
status= "disabled";
};
- nand: nand@00360000 {
+ nand: nand@360000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x00360000 0x600>,
<0x0050a408 0x600>,
@@ -573,7 +573,7 @@
status = "disabled";
};
- sdio0: sdhci@003f1000 {
+ sdio0: sdhci@3f1000 {
compatible = "brcm,sdhci-iproc";
reg = <0x003f1000 0x100>;
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
@@ -583,7 +583,7 @@
status = "disabled";
};
- sdio1: sdhci@003f2000 {
+ sdio1: sdhci@3f2000 {
compatible = "brcm,sdhci-iproc";
reg = <0x003f2000 0x100>;
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
@@ -60,7 +60,7 @@
serial1 = &uaa1;
};
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x00000000 0x0 0x80000000>;
};
@@ -62,97 +62,97 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu@000 {
+ cpu@0 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x000>;
enable-method = "psci";
};
- cpu@001 {
+ cpu@1 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x001>;
enable-method = "psci";
};
- cpu@002 {
+ cpu@2 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x002>;
enable-method = "psci";
};
- cpu@003 {
+ cpu@3 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x003>;
enable-method = "psci";
};
- cpu@004 {
+ cpu@4 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x004>;
enable-method = "psci";
};
- cpu@005 {
+ cpu@5 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x005>;
enable-method = "psci";
};
- cpu@006 {
+ cpu@6 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x006>;
enable-method = "psci";
};
- cpu@007 {
+ cpu@7 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x007>;
enable-method = "psci";
};
- cpu@008 {
+ cpu@8 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x008>;
enable-method = "psci";
};
- cpu@009 {
+ cpu@9 {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x009>;
enable-method = "psci";
};
- cpu@00a {
+ cpu@a {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00a>;
enable-method = "psci";
};
- cpu@00b {
+ cpu@b {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00b>;
enable-method = "psci";
};
- cpu@00c {
+ cpu@c {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00c>;
enable-method = "psci";
};
- cpu@00d {
+ cpu@d {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00d>;
enable-method = "psci";
};
- cpu@00e {
+ cpu@e {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00e>;
enable-method = "psci";
};
- cpu@00f {
+ cpu@f {
device_type = "cpu";
compatible = "cavium,thunder", "arm,armv8";
reg = <0x0 0x00f>;
@@ -18,7 +18,7 @@
model = "Hisilicon Hip05 D02 Development Board";
compatible = "hisilicon,hip05-d02";
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x00000000 0x0 0x80000000>;
};
@@ -17,7 +17,7 @@
model = "Hisilicon Hip06 D03 Development Board";
compatible = "hisilicon,hip06-d03";
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x00000000 0x0 0x40000000>;
};
@@ -56,7 +56,7 @@
stdout-path = "serial0:115200n8";
};
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
@@ -56,7 +56,7 @@
stdout-path = "serial0:115200n8";
};
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
@@ -57,7 +57,7 @@
stdout-path = "serial0:115200n8";
};
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
@@ -55,7 +55,7 @@
stdout-path = "serial0:115200n8";
};
- memory@00000000 {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
@@ -54,13 +54,13 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@000 {
+ cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
- cpu@001 {
+ cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
@@ -54,13 +54,13 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@000 {
+ cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
- cpu@001 {
+ cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
@@ -52,13 +52,13 @@
#size-cells = <0>;
compatible = "marvell,armada-ap810-octa";
- cpu@000 {
+ cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
- cpu@001 {
+ cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
@@ -167,7 +167,7 @@
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;
- gpio0: gpio@0400 {
+ gpio0: gpio@400 {
compatible = "snps,dw-apb-gpio";
reg = <0x0400 0x400>;
#address-cells = <1>;
@@ -185,7 +185,7 @@
};
};
- gpio1: gpio@0800 {
+ gpio1: gpio@800 {
compatible = "snps,dw-apb-gpio";
reg = <0x0800 0x400>;
#address-cells = <1>;
@@ -203,7 +203,7 @@
};
};
- gpio2: gpio@0c00 {
+ gpio2: gpio@c00 {
compatible = "snps,dw-apb-gpio";
reg = <0x0c00 0x400>;
#address-cells = <1>;
@@ -192,7 +192,7 @@
};
};
- sdhci@07824000 {
+ sdhci@7824000 {
vmmc-supply = <&pm8916_l8>;
vqmmc-supply = <&pm8916_l5>;
@@ -202,7 +202,7 @@
status = "okay";
};
- sdhci@07864000 {
+ sdhci@7864000 {
vmmc-supply = <&pm8916_l11>;
vqmmc-supply = <&pm8916_l12>;
@@ -232,7 +232,7 @@
};
};
- lpass@07708000 {
+ lpass@7708000 {
status = "okay";
};
@@ -51,31 +51,31 @@
pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
};
- i2c@07577000 {
+ i2c@7577000 {
/* On Low speed expansion */
label = "LS-I2C0";
status = "okay";
};
- i2c@075b6000 {
+ i2c@75b6000 {
/* On Low speed expansion */
label = "LS-I2C1";
status = "okay";
};
- spi@07575000 {
+ spi@7575000 {
/* On Low speed expansion */
label = "LS-SPI0";
status = "okay";
};
- i2c@075b5000 {
+ i2c@75b5000 {
/* On High speed expansion */
label = "HS-I2C2";
status = "okay";
};
- spi@075ba000{
+ spi@75ba000{
/* On High speed expansion */
label = "HS-SPI1";
status = "okay";
@@ -495,7 +495,7 @@
status = "disabled";
};
- lpass: lpass@07708000 {
+ lpass: lpass@7708000 {
status = "disabled";
compatible = "qcom,lpass-cpu-apq8016";
clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
@@ -530,7 +530,7 @@
#sound-dai-cells = <1>;
};
- sdhc_1: sdhci@07824000 {
+ sdhc_1: sdhci@7824000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
reg-names = "hc_mem", "core_mem";
@@ -547,7 +547,7 @@
status = "disabled";
};
- sdhc_2: sdhci@07864000 {
+ sdhc_2: sdhci@7864000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x07864900 0x11c>, <0x07864000 0x800>;
reg-names = "hc_mem", "core_mem";
@@ -395,7 +395,7 @@
#clock-cells = <1>;
};
- blsp1_spi0: spi@07575000 {
+ blsp1_spi0: spi@7575000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x07575000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -410,7 +410,7 @@
status = "disabled";
};
- blsp2_i2c0: i2c@075b5000 {
+ blsp2_i2c0: i2c@75b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b5000 0x1000>;
interrupts = <GIC_SPI 101 0>;
@@ -441,7 +441,7 @@
status = "disabled";
};
- blsp2_i2c1: i2c@075b6000 {
+ blsp2_i2c1: i2c@75b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b6000 0x1000>;
interrupts = <GIC_SPI 102 0>;
@@ -466,7 +466,7 @@
status = "disabled";
};
- blsp1_i2c2: i2c@07577000 {
+ blsp1_i2c2: i2c@7577000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07577000 0x1000>;
interrupts = <GIC_SPI 97 0>;
@@ -481,7 +481,7 @@
status = "disabled";
};
- blsp2_spi5: spi@075ba000{
+ blsp2_spi5: spi@75ba000{
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x075ba000 0x600>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
@@ -522,7 +522,7 @@
#interrupt-cells = <2>;
};
- timer@09840000 {
+ timer@9840000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm64/boot/dts -type -f -name '*.dts*' Signed-off-by: Rob Herring <robh@kernel.org> --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 16 +++--- arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 6 +- arch/arm64/boot/dts/apm/apm-storm.dtsi | 4 +- arch/arm64/boot/dts/arm/foundation-v8.dtsi | 14 ++--- arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts | 2 +- arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 24 ++++---- .../boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 2 +- .../arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts | 2 +- arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 4 +- .../boot/dts/broadcom/stingray/stingray-clock.dtsi | 12 ++-- .../boot/dts/broadcom/stingray/stingray-fs4.dtsi | 4 +- .../dts/broadcom/stingray/stingray-pinctrl.dtsi | 4 +- .../boot/dts/broadcom/stingray/stingray-sata.dtsi | 32 +++++------ .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 66 +++++++++++----------- arch/arm64/boot/dts/cavium/thunder-88xx.dts | 2 +- arch/arm64/boot/dts/cavium/thunder-88xx.dtsi | 32 +++++------ arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 2 +- arch/arm64/boot/dts/hisilicon/hip06-d03.dts | 2 +- arch/arm64/boot/dts/marvell/armada-7040-db.dts | 2 +- arch/arm64/boot/dts/marvell/armada-8040-db.dts | 2 +- arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 2 +- arch/arm64/boot/dts/marvell/armada-8080-db.dts | 2 +- arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi | 4 +- arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 4 +- .../dts/marvell/armada-ap810-ap0-octa-core.dtsi | 4 +- arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 6 +- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 6 +- arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 10 ++-- arch/arm64/boot/dts/qcom/msm8916.dtsi | 6 +- arch/arm64/boot/dts/qcom/msm8996.dtsi | 12 ++-- 30 files changed, 145 insertions(+), 145 deletions(-)