diff mbox

arm64: defconfig: enable USB host and IOMMU for msm8916

Message ID 20171101195714.26729-1-robh@kernel.org (mailing list archive)
State New, archived
Headers show

Commit Message

Rob Herring (Arm) Nov. 1, 2017, 7:57 p.m. UTC 
Add config options needed on DB410c and other msm8916 based boards for
the IOMMU and USB host. The IOMMU is needed to enable the GPU.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
 arch/arm64/configs/defconfig | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Nicolas Dechesne Nov. 2, 2017, 3:21 p.m. UTC | #1 
On Wed, Nov 1, 2017 at 8:57 PM, Rob Herring <robh@kernel.org> wrote:
> Add config options needed on DB410c and other msm8916 based boards for
> the IOMMU and USB host. The IOMMU is needed to enable the GPU.
>

The USB bits below are already taken care in a patch from Alex Elder 2
weeks ago, see [1]

The IOMMU bit has been applied by Arnd already as well, see [2]

[1] https://patchwork.kernel.org/patch/10008457
[2] https://patchwork.kernel.org/patch/9999911/
diff mbox

Patch

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 34480e9af2e7..04174704fa17 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -423,6 +423,7 @@  CONFIG_USB_DWC2=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_CHIPIDEA_ULPI=y
 CONFIG_USB_ISP1760=y
 CONFIG_USB_HSIC_USB3503=y
 CONFIG_NOP_USB_XCEIV=y
@@ -431,6 +432,7 @@  CONFIG_USB_QCOM_8X16_PHY=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_ULPI_BUS=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
@@ -510,6 +512,7 @@  CONFIG_HI6220_MBOX=y
 CONFIG_ROCKCHIP_IOMMU=y
 CONFIG_ARM_SMMU=y
 CONFIG_ARM_SMMU_V3=y
+CONFIG_QCOM_IOMMU=y
 CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RASPBERRYPI_POWER=y
 CONFIG_QCOM_SMEM=y
@@ -534,6 +537,7 @@  CONFIG_PWM_TEGRA=m
 CONFIG_PHY_RCAR_GEN3_USB2=y
 CONFIG_PHY_HI6220_USB=y
 CONFIG_PHY_SUN4I_USB=y
+CONFIG_PHY_QCOM_USB_HS=y
 CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 CONFIG_PHY_ROCKCHIP_EMMC=y
 CONFIG_PHY_ROCKCHIP_PCIE=m