| Message ID | 20171218143643.7714-13-miquel.raynal@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Miquel, On lun., déc. 18 2017, Miquel Raynal <miquel.raynal@free-electrons.com> wrote: > Add thermal DT nodes in AP806 and CP110 master/slave DTSI files. > > Suggested-by: David Sniatkiwicz <davidsn@marvell.com> > Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Applied on mvebu/dt64 (but not yet in linux-next) Thanks, Gregory > --- > arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 6 ++++++ > arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 6 ++++++ > arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 6 ++++++ > 3 files changed, 18 insertions(+) > > diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi > index 1c4dd8ab9ad5..bbc5a4d3acac 100644 > --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi > +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi > @@ -285,6 +285,12 @@ > gpio-ranges = <&ap_pinctrl 0 0 20>; > }; > }; > + > + ap_thermal: thermal@6f808C { > + compatible = "marvell,armada-ap806-thermal"; > + reg = <0x6f808C 0x4>, > + <0x6f8084 0x8>; > + }; > }; > }; > }; > diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi > index e3b64d03fbd8..ecbc76d26dff 100644 > --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi > +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi > @@ -182,6 +182,12 @@ > interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; > }; > > + cpm_thermal: thermal@400078 { > + compatible = "marvell,armada-cp110-thermal"; > + reg = <0x400078 0x4>, > + <0x400070 0x8>; > + }; > + > cpm_syscon0: system-controller@440000 { > compatible = "syscon", "simple-mfd"; > reg = <0x440000 0x2000>; > diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi > index 0d51096c69f8..29ba32c68870 100644 > --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi > +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi > @@ -182,6 +182,12 @@ > interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; > }; > > + cps_thermal: thermal@400078 { > + compatible = "marvell,armada-cp110-thermal"; > + reg = <0x400078 0x4>, > + <0x400070 0x8>; > + }; > + > cps_syscon0: system-controller@440000 { > compatible = "syscon", "simple-mfd"; > reg = <0x440000 0x2000>; > -- > 2.11.0 >
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 1c4dd8ab9ad5..bbc5a4d3acac 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -285,6 +285,12 @@ gpio-ranges = <&ap_pinctrl 0 0 20>; }; }; + + ap_thermal: thermal@6f808C { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x6f808C 0x4>, + <0x6f8084 0x8>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index e3b64d03fbd8..ecbc76d26dff 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -182,6 +182,12 @@ interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; }; + cpm_thermal: thermal@400078 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x400078 0x4>, + <0x400070 0x8>; + }; + cpm_syscon0: system-controller@440000 { compatible = "syscon", "simple-mfd"; reg = <0x440000 0x2000>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 0d51096c69f8..29ba32c68870 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -182,6 +182,12 @@ interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; }; + cps_thermal: thermal@400078 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x400078 0x4>, + <0x400070 0x8>; + }; + cps_syscon0: system-controller@440000 { compatible = "syscon", "simple-mfd"; reg = <0x440000 0x2000>;
Add thermal DT nodes in AP806 and CP110 master/slave DTSI files. Suggested-by: David Sniatkiwicz <davidsn@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 6 ++++++ arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 6 ++++++ arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 6 ++++++ 3 files changed, 18 insertions(+)