| Message ID | 20171218143643.7714-8-miquel.raynal@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Miquel, On lun., déc. 18 2017, Miquel Raynal <miquel.raynal@free-electrons.com> wrote: > From: Baruch Siach <baruch@tkos.co.il> > > The CP110 component is integrated in the Armada 8k and 7k lines of > processors. > > Signed-off-by: Baruch Siach <baruch@tkos.co.il> > [<miquel.raynal@free-electrons.com>: renamed the register pointers as > well as some definitions related to the new register names and > simplified the init sequence for Armada 380] > Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Gregory > --- > drivers/thermal/armada_thermal.c | 33 ++++++++++++++++++++++++++------- > 1 file changed, 26 insertions(+), 7 deletions(-) > > diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c > index ec29ea76b818..11a94ad66c35 100644 > --- a/drivers/thermal/armada_thermal.c > +++ b/drivers/thermal/armada_thermal.c > @@ -37,7 +37,6 @@ > #define A375_UNIT_CONTROL_MASK 0x7 > #define A375_READOUT_INVERT BIT(15) > #define A375_HW_RESETn BIT(8) > -#define A380_HW_RESET BIT(8) > > /* Legacy bindings */ > #define LEGACY_CONTROL_MEM_LEN 0x4 > @@ -52,6 +51,10 @@ > #define CONTROL0_TSEN_RESET BIT(1) > #define CONTROL0_TSEN_ENABLE BIT(2) > > +/* EXT_TSEN refers to the external temperature sensors, out of the AP */ > +#define CONTROL1_EXT_TSEN_SW_RESET BIT(7) > +#define CONTROL1_EXT_TSEN_HW_RESETn BIT(8) > + > struct armada_thermal_data; > > /* Marvell EBU Thermal Sensor Dev Structure */ > @@ -153,12 +156,11 @@ static void armada380_init_sensor(struct platform_device *pdev, > { > u32 reg = readl_relaxed(priv->control1); > > - /* Reset hardware once */ > - if (!(reg & A380_HW_RESET)) { > - reg |= A380_HW_RESET; > - writel(reg, priv->control1); > - msleep(10); > - } > + /* Disable the HW/SW reset */ > + reg |= CONTROL1_EXT_TSEN_HW_RESETn; > + reg &= ~CONTROL1_EXT_TSEN_SW_RESET; > + writel(reg, priv->control1); > + msleep(10); > } > > static void armada_ap806_init_sensor(struct platform_device *pdev, > @@ -278,6 +280,19 @@ static const struct armada_thermal_data armada_ap806_data = { > .needs_control0 = true, > }; > > +static const struct armada_thermal_data armada_cp110_data = { > + .is_valid = armada_is_valid, > + .init_sensor = armada380_init_sensor, > + .is_valid_bit = BIT(10), > + .temp_shift = 0, > + .temp_mask = 0x3ff, > + .coef_b = 1172499100ULL, > + .coef_m = 2000096ULL, > + .coef_div = 4201, > + .inverted = true, > + .needs_control0 = true, > +}; > + > static const struct of_device_id armada_thermal_id_table[] = { > { > .compatible = "marvell,armadaxp-thermal", > @@ -300,6 +315,10 @@ static const struct of_device_id armada_thermal_id_table[] = { > .data = &armada_ap806_data, > }, > { > + .compatible = "marvell,armada-cp110-thermal", > + .data = &armada_cp110_data, > + }, > + { > /* sentinel */ > }, > }; > -- > 2.11.0 >
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index ec29ea76b818..11a94ad66c35 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -37,7 +37,6 @@ #define A375_UNIT_CONTROL_MASK 0x7 #define A375_READOUT_INVERT BIT(15) #define A375_HW_RESETn BIT(8) -#define A380_HW_RESET BIT(8) /* Legacy bindings */ #define LEGACY_CONTROL_MEM_LEN 0x4 @@ -52,6 +51,10 @@ #define CONTROL0_TSEN_RESET BIT(1) #define CONTROL0_TSEN_ENABLE BIT(2) +/* EXT_TSEN refers to the external temperature sensors, out of the AP */ +#define CONTROL1_EXT_TSEN_SW_RESET BIT(7) +#define CONTROL1_EXT_TSEN_HW_RESETn BIT(8) + struct armada_thermal_data; /* Marvell EBU Thermal Sensor Dev Structure */ @@ -153,12 +156,11 @@ static void armada380_init_sensor(struct platform_device *pdev, { u32 reg = readl_relaxed(priv->control1); - /* Reset hardware once */ - if (!(reg & A380_HW_RESET)) { - reg |= A380_HW_RESET; - writel(reg, priv->control1); - msleep(10); - } + /* Disable the HW/SW reset */ + reg |= CONTROL1_EXT_TSEN_HW_RESETn; + reg &= ~CONTROL1_EXT_TSEN_SW_RESET; + writel(reg, priv->control1); + msleep(10); } static void armada_ap806_init_sensor(struct platform_device *pdev, @@ -278,6 +280,19 @@ static const struct armada_thermal_data armada_ap806_data = { .needs_control0 = true, }; +static const struct armada_thermal_data armada_cp110_data = { + .is_valid = armada_is_valid, + .init_sensor = armada380_init_sensor, + .is_valid_bit = BIT(10), + .temp_shift = 0, + .temp_mask = 0x3ff, + .coef_b = 1172499100ULL, + .coef_m = 2000096ULL, + .coef_div = 4201, + .inverted = true, + .needs_control0 = true, +}; + static const struct of_device_id armada_thermal_id_table[] = { { .compatible = "marvell,armadaxp-thermal", @@ -300,6 +315,10 @@ static const struct of_device_id armada_thermal_id_table[] = { .data = &armada_ap806_data, }, { + .compatible = "marvell,armada-cp110-thermal", + .data = &armada_cp110_data, + }, + { /* sentinel */ }, };