| Message ID | 20171219135719.9531-7-miquel.raynal@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Miquel, On mar., déc. 19 2017, Miquel Raynal <miquel.raynal@free-electrons.com> wrote: > From: Baruch Siach <baruch@tkos.co.il> > > The AP806 component is integrated in the Armada 8K and 7K lines of > processors. > > The thermal sensor sample field on the status register is a signed > value. Extend armada_get_temp() and the driver structure to handle > signed values. > > Signed-off-by: Baruch Siach <baruch@tkos.co.il> > [<miquel.raynal@free-electrons.com>: Changes when applying over the > previous patches, including the register names changes, also switched > the coefficients values to s64 instead of unsigned long to deal with > negative values and used do_div instead of the traditionnal '/'] > Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> > Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> > --- > drivers/thermal/armada_thermal.c | 74 ++++++++++++++++++++++++++++++++-------- > 1 file changed, 59 insertions(+), 15 deletions(-) > > diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c > index ceebabf45c53..c7dcac39cbf9 100644 > --- a/drivers/thermal/armada_thermal.c > +++ b/drivers/thermal/armada_thermal.c > @@ -47,6 +47,11 @@ > #define CONTROL0_OFFSET 0x0 > #define CONTROL1_OFFSET 0x4 > > +/* TSEN refers to the temperature sensors within the AP */ > +#define CONTROL0_TSEN_START BIT(0) > +#define CONTROL0_TSEN_RESET BIT(1) > +#define CONTROL0_TSEN_ENABLE BIT(2) > + > struct armada_thermal_data; > > /* Marvell EBU Thermal Sensor Dev Structure */ > @@ -66,10 +71,11 @@ struct armada_thermal_data { > bool (*is_valid)(struct armada_thermal_priv *); > > /* Formula coeficients: temp = (b - m * reg) / div */ > - unsigned long coef_b; > - unsigned long coef_m; > - unsigned long coef_div; > + s64 coef_b; > + s64 coef_m; > + u32 coef_div; > bool inverted; > + bool signed_sample; > > /* Register shift and mask to access the sensor temperature */ > unsigned int temp_shift; > @@ -155,6 +161,18 @@ static void armada380_init_sensor(struct platform_device *pdev, > } > } > > +static void armada_ap806_init_sensor(struct platform_device *pdev, > + struct armada_thermal_priv *priv) > +{ > + u32 reg; > + > + reg = readl_relaxed(priv->control0); > + reg &= ~CONTROL0_TSEN_RESET; > + reg |= CONTROL0_TSEN_START | CONTROL0_TSEN_ENABLE; > + writel(reg, priv->control0); > + msleep(10); > +} > + > static bool armada_is_valid(struct armada_thermal_priv *priv) > { > u32 reg = readl_relaxed(priv->status); > @@ -166,8 +184,8 @@ static int armada_get_temp(struct thermal_zone_device *thermal, > int *temp) > { > struct armada_thermal_priv *priv = thermal->devdata; > - unsigned long reg; > - unsigned long m, b, div; > + u32 reg, div; > + s64 sample, b, m; > > /* Valid check */ > if (priv->data->is_valid && !priv->data->is_valid(priv)) { > @@ -178,6 +196,11 @@ static int armada_get_temp(struct thermal_zone_device *thermal, > > reg = readl_relaxed(priv->status); > reg = (reg >> priv->data->temp_shift) & priv->data->temp_mask; > + if (priv->data->signed_sample) > + /* The most significant bit is the sign bit */ > + sample = sign_extend32(reg, fls(priv->data->temp_mask) - 1); > + else > + sample = reg; > > /* Get formula coeficients */ > b = priv->data->coef_b; > @@ -185,9 +208,12 @@ static int armada_get_temp(struct thermal_zone_device *thermal, > div = priv->data->coef_div; > > if (priv->data->inverted) > - *temp = ((m * reg) - b) / div; > + *temp = (m * sample) - b; > else > - *temp = (b - (m * reg)) / div; > + *temp = b - (m * sample); > + > + do_div(*temp, div); I wanted to test in on ARMv7 and this line failed to compile: In file included from arch/arm/include/asm/div64.h:127:0, from include/linux/kernel.h:173, from include/linux/list.h:9, from include/linux/kobject.h:20, from include/linux/device.h:17, from drivers/thermal/armada_thermal.c:16: drivers/thermal/armada_thermal.c: In function ‘armada_get_temp’: include/asm-generic/div64.h:208:28: warning: comparison of distinct pointer types lacks a cast (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \ ^ drivers/thermal/armada_thermal.c:247:2: note: in expansion of macro ‘do_div’ do_div(*temp, div); ^~~~~~ In file included from include/linux/ioport.h:13:0, from include/linux/device.h:16, from drivers/thermal/armada_thermal.c:16: include/asm-generic/div64.h:221:25: warning: right shift count >= width of type [-Wshift-count-overflow] } else if (likely(((n) >> 32) == 0)) { \ ^ include/linux/compiler.h:175:40: note: in definition of macro ‘likely’ # define likely(x) __builtin_expect(!!(x), 1) ^ drivers/thermal/armada_thermal.c:247:2: note: in expansion of macro ‘do_div’ do_div(*temp, div); ^~~~~~ In file included from arch/arm/include/asm/div64.h:127:0, from include/linux/kernel.h:173, from include/linux/list.h:9, from include/linux/kobject.h:20, from include/linux/device.h:17, from drivers/thermal/armada_thermal.c:16: include/asm-generic/div64.h:225:22: error: passing argument 1 of ‘__div64_32’ from incompatible pointer type [-Werror=incompatible-pointer-types] __rem = __div64_32(&(n), __base); \ ^ drivers/thermal/armada_thermal.c:247:2: note: in expansion of macro ‘do_div’ do_div(*temp, div); ^~~~~~ In file included from include/linux/kernel.h:173:0, from include/linux/list.h:9, from include/linux/kobject.h:20, from include/linux/device.h:17, from drivers/thermal/armada_thermal.c:16: arch/arm/include/asm/div64.h:33:24: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘int *’ static inline uint32_t __div64_32(uint64_t *n, uint32_t base) Gregory > + > return 0; > } > > @@ -199,8 +225,8 @@ static const struct armada_thermal_data armadaxp_data = { > .init_sensor = armadaxp_init_sensor, > .temp_shift = 10, > .temp_mask = 0x1ff, > - .coef_b = 3153000000UL, > - .coef_m = 10000000UL, > + .coef_b = 3153000000ULL, > + .coef_m = 10000000ULL, > .coef_div = 13825, > }; > > @@ -210,8 +236,8 @@ static const struct armada_thermal_data armada370_data = { > .is_valid_bit = BIT(9), > .temp_shift = 10, > .temp_mask = 0x1ff, > - .coef_b = 3153000000UL, > - .coef_m = 10000000UL, > + .coef_b = 3153000000ULL, > + .coef_m = 10000000ULL, > .coef_div = 13825, > }; > > @@ -221,8 +247,8 @@ static const struct armada_thermal_data armada375_data = { > .is_valid_bit = BIT(10), > .temp_shift = 0, > .temp_mask = 0x1ff, > - .coef_b = 3171900000UL, > - .coef_m = 10000000UL, > + .coef_b = 3171900000ULL, > + .coef_m = 10000000ULL, > .coef_div = 13616, > .needs_control0 = true, > }; > @@ -233,12 +259,26 @@ static const struct armada_thermal_data armada380_data = { > .is_valid_bit = BIT(10), > .temp_shift = 0, > .temp_mask = 0x3ff, > - .coef_b = 1172499100UL, > - .coef_m = 2000096UL, > + .coef_b = 1172499100ULL, > + .coef_m = 2000096ULL, > .coef_div = 4201, > .inverted = true, > }; > > +static const struct armada_thermal_data armada_ap806_data = { > + .is_valid = armada_is_valid, > + .init_sensor = armada_ap806_init_sensor, > + .is_valid_bit = BIT(16), > + .temp_shift = 0, > + .temp_mask = 0x3ff, > + .coef_b = -150000LL, > + .coef_m = 423ULL, > + .coef_div = 1, > + .inverted = true, > + .signed_sample = true, > + .needs_control0 = true, > +}; > + > static const struct of_device_id armada_thermal_id_table[] = { > { > .compatible = "marvell,armadaxp-thermal", > @@ -257,6 +297,10 @@ static const struct of_device_id armada_thermal_id_table[] = { > .data = &armada380_data, > }, > { > + .compatible = "marvell,armada-ap806-thermal", > + .data = &armada_ap806_data, > + }, > + { > /* sentinel */ > }, > }; > -- > 2.11.0 >
Hi Miquel, On mar., déc. 19 2017, Miquel Raynal <miquel.raynal@free-electrons.com> wrote: > From: Baruch Siach <baruch@tkos.co.il> > > The AP806 component is integrated in the Armada 8K and 7K lines of > processors. > > The thermal sensor sample field on the status register is a signed > value. Extend armada_get_temp() and the driver structure to handle > signed values. > > Signed-off-by: Baruch Siach <baruch@tkos.co.il> > [<miquel.raynal@free-electrons.com>: Changes when applying over the > previous patches, including the register names changes, also switched > the coefficients values to s64 instead of unsigned long to deal with > negative values and used do_div instead of the traditionnal '/'] > Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> > Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> On Armada 7040 DB and Machitobin, the temperature value looks coherent: Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Gregory > --- > drivers/thermal/armada_thermal.c | 74 ++++++++++++++++++++++++++++++++-------- > 1 file changed, 59 insertions(+), 15 deletions(-) > > diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c > index ceebabf45c53..c7dcac39cbf9 100644 > --- a/drivers/thermal/armada_thermal.c > +++ b/drivers/thermal/armada_thermal.c > @@ -47,6 +47,11 @@ > #define CONTROL0_OFFSET 0x0 > #define CONTROL1_OFFSET 0x4 > > +/* TSEN refers to the temperature sensors within the AP */ > +#define CONTROL0_TSEN_START BIT(0) > +#define CONTROL0_TSEN_RESET BIT(1) > +#define CONTROL0_TSEN_ENABLE BIT(2) > + > struct armada_thermal_data; > > /* Marvell EBU Thermal Sensor Dev Structure */ > @@ -66,10 +71,11 @@ struct armada_thermal_data { > bool (*is_valid)(struct armada_thermal_priv *); > > /* Formula coeficients: temp = (b - m * reg) / div */ > - unsigned long coef_b; > - unsigned long coef_m; > - unsigned long coef_div; > + s64 coef_b; > + s64 coef_m; > + u32 coef_div; > bool inverted; > + bool signed_sample; > > /* Register shift and mask to access the sensor temperature */ > unsigned int temp_shift; > @@ -155,6 +161,18 @@ static void armada380_init_sensor(struct platform_device *pdev, > } > } > > +static void armada_ap806_init_sensor(struct platform_device *pdev, > + struct armada_thermal_priv *priv) > +{ > + u32 reg; > + > + reg = readl_relaxed(priv->control0); > + reg &= ~CONTROL0_TSEN_RESET; > + reg |= CONTROL0_TSEN_START | CONTROL0_TSEN_ENABLE; > + writel(reg, priv->control0); > + msleep(10); > +} > + > static bool armada_is_valid(struct armada_thermal_priv *priv) > { > u32 reg = readl_relaxed(priv->status); > @@ -166,8 +184,8 @@ static int armada_get_temp(struct thermal_zone_device *thermal, > int *temp) > { > struct armada_thermal_priv *priv = thermal->devdata; > - unsigned long reg; > - unsigned long m, b, div; > + u32 reg, div; > + s64 sample, b, m; > > /* Valid check */ > if (priv->data->is_valid && !priv->data->is_valid(priv)) { > @@ -178,6 +196,11 @@ static int armada_get_temp(struct thermal_zone_device *thermal, > > reg = readl_relaxed(priv->status); > reg = (reg >> priv->data->temp_shift) & priv->data->temp_mask; > + if (priv->data->signed_sample) > + /* The most significant bit is the sign bit */ > + sample = sign_extend32(reg, fls(priv->data->temp_mask) - 1); > + else > + sample = reg; > > /* Get formula coeficients */ > b = priv->data->coef_b; > @@ -185,9 +208,12 @@ static int armada_get_temp(struct thermal_zone_device *thermal, > div = priv->data->coef_div; > > if (priv->data->inverted) > - *temp = ((m * reg) - b) / div; > + *temp = (m * sample) - b; > else > - *temp = (b - (m * reg)) / div; > + *temp = b - (m * sample); > + > + do_div(*temp, div); > + > return 0; > } > > @@ -199,8 +225,8 @@ static const struct armada_thermal_data armadaxp_data = { > .init_sensor = armadaxp_init_sensor, > .temp_shift = 10, > .temp_mask = 0x1ff, > - .coef_b = 3153000000UL, > - .coef_m = 10000000UL, > + .coef_b = 3153000000ULL, > + .coef_m = 10000000ULL, > .coef_div = 13825, > }; > > @@ -210,8 +236,8 @@ static const struct armada_thermal_data armada370_data = { > .is_valid_bit = BIT(9), > .temp_shift = 10, > .temp_mask = 0x1ff, > - .coef_b = 3153000000UL, > - .coef_m = 10000000UL, > + .coef_b = 3153000000ULL, > + .coef_m = 10000000ULL, > .coef_div = 13825, > }; > > @@ -221,8 +247,8 @@ static const struct armada_thermal_data armada375_data = { > .is_valid_bit = BIT(10), > .temp_shift = 0, > .temp_mask = 0x1ff, > - .coef_b = 3171900000UL, > - .coef_m = 10000000UL, > + .coef_b = 3171900000ULL, > + .coef_m = 10000000ULL, > .coef_div = 13616, > .needs_control0 = true, > }; > @@ -233,12 +259,26 @@ static const struct armada_thermal_data armada380_data = { > .is_valid_bit = BIT(10), > .temp_shift = 0, > .temp_mask = 0x3ff, > - .coef_b = 1172499100UL, > - .coef_m = 2000096UL, > + .coef_b = 1172499100ULL, > + .coef_m = 2000096ULL, > .coef_div = 4201, > .inverted = true, > }; > > +static const struct armada_thermal_data armada_ap806_data = { > + .is_valid = armada_is_valid, > + .init_sensor = armada_ap806_init_sensor, > + .is_valid_bit = BIT(16), > + .temp_shift = 0, > + .temp_mask = 0x3ff, > + .coef_b = -150000LL, > + .coef_m = 423ULL, > + .coef_div = 1, > + .inverted = true, > + .signed_sample = true, > + .needs_control0 = true, > +}; > + > static const struct of_device_id armada_thermal_id_table[] = { > { > .compatible = "marvell,armadaxp-thermal", > @@ -257,6 +297,10 @@ static const struct of_device_id armada_thermal_id_table[] = { > .data = &armada380_data, > }, > { > + .compatible = "marvell,armada-ap806-thermal", > + .data = &armada_ap806_data, > + }, > + { > /* sentinel */ > }, > }; > -- > 2.11.0 >
Hello Gregory, On Wed, 20 Dec 2017 11:27:18 +0100 Gregory CLEMENT <gregory.clement@free-electrons.com> wrote: > Hi Miquel, > > On mar., déc. 19 2017, Miquel Raynal > <miquel.raynal@free-electrons.com> wrote: > > > From: Baruch Siach <baruch@tkos.co.il> > > > > The AP806 component is integrated in the Armada 8K and 7K lines of > > processors. > > > > The thermal sensor sample field on the status register is a signed > > value. Extend armada_get_temp() and the driver structure to handle > > signed values. > > > > Signed-off-by: Baruch Siach <baruch@tkos.co.il> > > [<miquel.raynal@free-electrons.com>: Changes when applying over the > > previous patches, including the register names changes, also > > switched the coefficients values to s64 instead of unsigned long to > > deal with negative values and used do_div instead of the > > traditionnal '/'] Signed-off-by: Miquel Raynal > > <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT > > <gregory.clement@free-electrons.com> --- > > drivers/thermal/armada_thermal.c | 74 > > ++++++++++++++++++++++++++++++++-------- 1 file changed, 59 > > insertions(+), 15 deletions(-) > > > > diff --git a/drivers/thermal/armada_thermal.c > > b/drivers/thermal/armada_thermal.c index ceebabf45c53..c7dcac39cbf9 > > 100644 --- a/drivers/thermal/armada_thermal.c > > +++ b/drivers/thermal/armada_thermal.c > > @@ -47,6 +47,11 @@ > > #define CONTROL0_OFFSET 0x0 > > #define CONTROL1_OFFSET 0x4 > > > > +/* TSEN refers to the temperature sensors within the AP */ > > +#define CONTROL0_TSEN_START BIT(0) > > +#define CONTROL0_TSEN_RESET BIT(1) > > +#define CONTROL0_TSEN_ENABLE BIT(2) > > + > > struct armada_thermal_data; > > > > /* Marvell EBU Thermal Sensor Dev Structure */ > > @@ -66,10 +71,11 @@ struct armada_thermal_data { > > bool (*is_valid)(struct armada_thermal_priv *); > > > > /* Formula coeficients: temp = (b - m * reg) / div */ > > - unsigned long coef_b; > > - unsigned long coef_m; > > - unsigned long coef_div; > > + s64 coef_b; > > + s64 coef_m; > > + u32 coef_div; > > bool inverted; > > + bool signed_sample; > > > > /* Register shift and mask to access the sensor > > temperature */ unsigned int temp_shift; > > @@ -155,6 +161,18 @@ static void armada380_init_sensor(struct > > platform_device *pdev, } > > } > > > > +static void armada_ap806_init_sensor(struct platform_device *pdev, > > + struct armada_thermal_priv > > *priv) +{ > > + u32 reg; > > + > > + reg = readl_relaxed(priv->control0); > > + reg &= ~CONTROL0_TSEN_RESET; > > + reg |= CONTROL0_TSEN_START | CONTROL0_TSEN_ENABLE; > > + writel(reg, priv->control0); > > + msleep(10); > > +} > > + > > static bool armada_is_valid(struct armada_thermal_priv *priv) > > { > > u32 reg = readl_relaxed(priv->status); > > @@ -166,8 +184,8 @@ static int armada_get_temp(struct > > thermal_zone_device *thermal, int *temp) > > { > > struct armada_thermal_priv *priv = thermal->devdata; > > - unsigned long reg; > > - unsigned long m, b, div; > > + u32 reg, div; > > + s64 sample, b, m; > > > > /* Valid check */ > > if (priv->data->is_valid && !priv->data->is_valid(priv)) { > > @@ -178,6 +196,11 @@ static int armada_get_temp(struct > > thermal_zone_device *thermal, > > reg = readl_relaxed(priv->status); > > reg = (reg >> priv->data->temp_shift) & > > priv->data->temp_mask; > > + if (priv->data->signed_sample) > > + /* The most significant bit is the sign bit */ > > + sample = sign_extend32(reg, > > fls(priv->data->temp_mask) - 1); > > + else > > + sample = reg; > > > > /* Get formula coeficients */ > > b = priv->data->coef_b; > > @@ -185,9 +208,12 @@ static int armada_get_temp(struct > > thermal_zone_device *thermal, div = priv->data->coef_div; > > > > if (priv->data->inverted) > > - *temp = ((m * reg) - b) / div; > > + *temp = (m * sample) - b; > > else > > - *temp = (b - (m * reg)) / div; > > + *temp = b - (m * sample); > > + > > + do_div(*temp, div); > > I wanted to test in on ARMv7 and this line failed to compile: > In file included from arch/arm/include/asm/div64.h:127:0, > from include/linux/kernel.h:173, > from include/linux/list.h:9, > from include/linux/kobject.h:20, > from include/linux/device.h:17, > from drivers/thermal/armada_thermal.c:16: > drivers/thermal/armada_thermal.c: In function ‘armada_get_temp’: > include/asm-generic/div64.h:208:28: warning: comparison of distinct > pointer types lacks a cast (void)(((typeof((n)) *)0) == ((uint64_t > *)0)); \ ^ > drivers/thermal/armada_thermal.c:247:2: note: in expansion of macro > ‘do_div’ do_div(*temp, div); > ^~~~~~ > In file included from include/linux/ioport.h:13:0, > from include/linux/device.h:16, > from drivers/thermal/armada_thermal.c:16: > include/asm-generic/div64.h:221:25: warning: right shift count >= > width of type [-Wshift-count-overflow] } else if (likely(((n) >> 32) > == 0)) { \ ^ > include/linux/compiler.h:175:40: note: in definition of macro ‘likely’ > # define likely(x) __builtin_expect(!!(x), 1) > ^ > drivers/thermal/armada_thermal.c:247:2: note: in expansion of macro > ‘do_div’ do_div(*temp, div); > ^~~~~~ > In file included from arch/arm/include/asm/div64.h:127:0, > from include/linux/kernel.h:173, > from include/linux/list.h:9, > from include/linux/kobject.h:20, > from include/linux/device.h:17, > from drivers/thermal/armada_thermal.c:16: > include/asm-generic/div64.h:225:22: error: passing argument 1 of > ‘__div64_32’ from incompatible pointer type > [-Werror=incompatible-pointer-types] __rem = __div64_32(&(n), > __base); \ ^ drivers/thermal/armada_thermal.c:247:2: note: in > expansion of macro ‘do_div’ do_div(*temp, div); > ^~~~~~ > In file included from include/linux/kernel.h:173:0, > from include/linux/list.h:9, > from include/linux/kobject.h:20, > from include/linux/device.h:17, > from drivers/thermal/armada_thermal.c:16: > arch/arm/include/asm/div64.h:33:24: note: expected ‘uint64_t * {aka > long long unsigned int *}’ but argument is of type ‘int *’ static > inline uint32_t __div64_32(uint64_t *n, uint32_t base) > Indeed, I also have this compilation error with a 32-bit toolchain but not with the 64-bit one. Anyway I fixed it and tested on a 32-bit platform also. Thanks for reporting it. Miquèl
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index ceebabf45c53..c7dcac39cbf9 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -47,6 +47,11 @@ #define CONTROL0_OFFSET 0x0 #define CONTROL1_OFFSET 0x4 +/* TSEN refers to the temperature sensors within the AP */ +#define CONTROL0_TSEN_START BIT(0) +#define CONTROL0_TSEN_RESET BIT(1) +#define CONTROL0_TSEN_ENABLE BIT(2) + struct armada_thermal_data; /* Marvell EBU Thermal Sensor Dev Structure */ @@ -66,10 +71,11 @@ struct armada_thermal_data { bool (*is_valid)(struct armada_thermal_priv *); /* Formula coeficients: temp = (b - m * reg) / div */ - unsigned long coef_b; - unsigned long coef_m; - unsigned long coef_div; + s64 coef_b; + s64 coef_m; + u32 coef_div; bool inverted; + bool signed_sample; /* Register shift and mask to access the sensor temperature */ unsigned int temp_shift; @@ -155,6 +161,18 @@ static void armada380_init_sensor(struct platform_device *pdev, } } +static void armada_ap806_init_sensor(struct platform_device *pdev, + struct armada_thermal_priv *priv) +{ + u32 reg; + + reg = readl_relaxed(priv->control0); + reg &= ~CONTROL0_TSEN_RESET; + reg |= CONTROL0_TSEN_START | CONTROL0_TSEN_ENABLE; + writel(reg, priv->control0); + msleep(10); +} + static bool armada_is_valid(struct armada_thermal_priv *priv) { u32 reg = readl_relaxed(priv->status); @@ -166,8 +184,8 @@ static int armada_get_temp(struct thermal_zone_device *thermal, int *temp) { struct armada_thermal_priv *priv = thermal->devdata; - unsigned long reg; - unsigned long m, b, div; + u32 reg, div; + s64 sample, b, m; /* Valid check */ if (priv->data->is_valid && !priv->data->is_valid(priv)) { @@ -178,6 +196,11 @@ static int armada_get_temp(struct thermal_zone_device *thermal, reg = readl_relaxed(priv->status); reg = (reg >> priv->data->temp_shift) & priv->data->temp_mask; + if (priv->data->signed_sample) + /* The most significant bit is the sign bit */ + sample = sign_extend32(reg, fls(priv->data->temp_mask) - 1); + else + sample = reg; /* Get formula coeficients */ b = priv->data->coef_b; @@ -185,9 +208,12 @@ static int armada_get_temp(struct thermal_zone_device *thermal, div = priv->data->coef_div; if (priv->data->inverted) - *temp = ((m * reg) - b) / div; + *temp = (m * sample) - b; else - *temp = (b - (m * reg)) / div; + *temp = b - (m * sample); + + do_div(*temp, div); + return 0; } @@ -199,8 +225,8 @@ static const struct armada_thermal_data armadaxp_data = { .init_sensor = armadaxp_init_sensor, .temp_shift = 10, .temp_mask = 0x1ff, - .coef_b = 3153000000UL, - .coef_m = 10000000UL, + .coef_b = 3153000000ULL, + .coef_m = 10000000ULL, .coef_div = 13825, }; @@ -210,8 +236,8 @@ static const struct armada_thermal_data armada370_data = { .is_valid_bit = BIT(9), .temp_shift = 10, .temp_mask = 0x1ff, - .coef_b = 3153000000UL, - .coef_m = 10000000UL, + .coef_b = 3153000000ULL, + .coef_m = 10000000ULL, .coef_div = 13825, }; @@ -221,8 +247,8 @@ static const struct armada_thermal_data armada375_data = { .is_valid_bit = BIT(10), .temp_shift = 0, .temp_mask = 0x1ff, - .coef_b = 3171900000UL, - .coef_m = 10000000UL, + .coef_b = 3171900000ULL, + .coef_m = 10000000ULL, .coef_div = 13616, .needs_control0 = true, }; @@ -233,12 +259,26 @@ static const struct armada_thermal_data armada380_data = { .is_valid_bit = BIT(10), .temp_shift = 0, .temp_mask = 0x3ff, - .coef_b = 1172499100UL, - .coef_m = 2000096UL, + .coef_b = 1172499100ULL, + .coef_m = 2000096ULL, .coef_div = 4201, .inverted = true, }; +static const struct armada_thermal_data armada_ap806_data = { + .is_valid = armada_is_valid, + .init_sensor = armada_ap806_init_sensor, + .is_valid_bit = BIT(16), + .temp_shift = 0, + .temp_mask = 0x3ff, + .coef_b = -150000LL, + .coef_m = 423ULL, + .coef_div = 1, + .inverted = true, + .signed_sample = true, + .needs_control0 = true, +}; + static const struct of_device_id armada_thermal_id_table[] = { { .compatible = "marvell,armadaxp-thermal", @@ -257,6 +297,10 @@ static const struct of_device_id armada_thermal_id_table[] = { .data = &armada380_data, }, { + .compatible = "marvell,armada-ap806-thermal", + .data = &armada_ap806_data, + }, + { /* sentinel */ }, };