[11/11] ARM: dts: sun8i: a83t: Enable HDMI on BananaPi M3

Commit Message

Jernej Škrabec Dec. 30, 2017, 9:02 p.m. UTC

BananaPi M3 includes HDMI connector, so add support for it.

Signed-off-by: Jernej Skrabec <[e-mail]>
---
 arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 29 ++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

Patch

diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 6550bf0e594b..2002d249e14c 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -60,6 +60,17 @@ 
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	reg_usb1_vbus: reg-usb1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1-vbus";
@@ -82,6 +93,10 @@ 
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
 	status = "okay";
@@ -100,6 +115,16 @@ 
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mdio {
 	rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
@@ -306,6 +331,10 @@ 
 	regulator-name = "vcc-ephy";
 };
 
+&tcon1 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pb_pins>;