@@ -18,8 +18,17 @@ Required properties:
The eight register sets following the control registers refer to
chip-select lines 0 through 7 respectively.
- cell-index : Which of multiple SPI controllers is this.
+- clocks : pointers to the reference clocks for this device, the first
+ one is the one used for the clock on the spi bus, the
+ second one is optional and is the clock used for the
+ functional part of the controller
+
Optional properties:
- interrupts : Is currently not used.
+- clock-names : names of used clocks, mandatory if the second clock is
+ used, the name must be "core", and "axi" (the latter
+ is only for Armada 7K/8K).
+
Example:
spi@10600 {
@@ -94,6 +94,7 @@ struct orion_spi {
struct spi_master *master;
void __iomem *base;
struct clk *clk;
+ struct clk *axi_clk;
const struct orion_spi_dev *devdata;
struct orion_direct_acc direct_access[ORION_NUM_CHIPSELECTS];
@@ -634,6 +635,14 @@ static int orion_spi_probe(struct platform_device *pdev)
if (status)
goto out;
+ /* The following clock is only used by some SoCs */
+ spi->axi_clk = devm_clk_get(&pdev->dev, "axi");
+ if (IS_ERR(spi->axi_clk) &&
+ PTR_ERR(spi->axi_clk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ if (!IS_ERR(spi->axi_clk))
+ clk_prepare_enable(spi->axi_clk);
+
tclk_hz = clk_get_rate(spi->clk);
/*
@@ -725,6 +734,7 @@ static int orion_spi_probe(struct platform_device *pdev)
out_rel_pm:
pm_runtime_disable(&pdev->dev);
out_rel_clk:
+ clk_disable_unprepare(spi->axi_clk);
clk_disable_unprepare(spi->clk);
out:
spi_master_put(master);
@@ -738,6 +748,7 @@ static int orion_spi_remove(struct platform_device *pdev)
struct orion_spi *spi = spi_master_get_devdata(master);
pm_runtime_get_sync(&pdev->dev);
+ clk_disable_unprepare(spi->axi_clk);
clk_disable_unprepare(spi->clk);
spi_unregister_master(master);
@@ -754,6 +765,7 @@ static int orion_spi_runtime_suspend(struct device *dev)
struct spi_master *master = dev_get_drvdata(dev);
struct orion_spi *spi = spi_master_get_devdata(master);
+ clk_disable_unprepare(spi->axi_clk);
clk_disable_unprepare(spi->clk);
return 0;
}
@@ -763,6 +775,8 @@ static int orion_spi_runtime_resume(struct device *dev)
struct spi_master *master = dev_get_drvdata(dev);
struct orion_spi *spi = spi_master_get_devdata(master);
+ if (!IS_ERR(spi->axi_clk))
+ clk_prepare_enable(spi->axi_clk);
return clk_prepare_enable(spi->clk);
}
#endif
On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock is optional because not all the SoCs need them but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updating accordingly as well as mentioning the mandatory clock which was also missing. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> --- Documentation/devicetree/bindings/spi/spi-orion.txt | 9 +++++++++ drivers/spi/spi-orion.c | 14 ++++++++++++++ 2 files changed, 23 insertions(+)