diff mbox

[6/6] ARM: dts: aspeed: Add Palmetto GPIO hogs

Message ID 20180212074325.23436-7-joel@jms.id.au (mailing list archive)
State New, archived
Headers show

Commit Message

Joel Stanley Feb. 12, 2018, 7:43 a.m. UTC 
These hogs are for parts of the system that need to be in this state,
but do not yet have a driver associated with them but they must be
configured in order to successfully boot the host.

There are also some pinmux hogs, where the default mode of the IP block
is configured.

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 157 ++++++++++++++++++++++++++
 1 file changed, 157 insertions(+)

Comments

Andrew Jeffery Feb. 16, 2018, 4:58 a.m. UTC | #1 
On Mon, 2018-02-12 at 18:13 +1030, Joel Stanley wrote:
> These hogs are for parts of the system that need to be in this state,
> but do not yet have a driver associated with them but they must be
> configured in order to successfully boot the host.
> 
> There are also some pinmux hogs, where the default mode of the IP block
> is configured.
> 
> Signed-off-by: Joel Stanley <joel@jms.id.au>

Acked-by: Andrew Jeffery <andrew@aj.id.au>

> ---
>  arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 157 ++++++++++++++++++++++++++
>  1 file changed, 157 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
> index 2a4a355a779d..bbddfe1d1cc8 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
> @@ -74,6 +74,14 @@
>  	};
>  };
>  
> +&pinctrl {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flbusy_default &pinctrl_flwp_default
> +
> +			&pinctrl_vgahs_default &pinctrl_vgavs_default
> +			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
> +};
> +
>  &uart5 {
>  	status = "okay";
>  };
> @@ -142,3 +150,152 @@
>  &ibt {
>  	status = "okay";
>  };
> +
> +&gpio {
> +	pin_func_mode0 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
> +		output-low;
> +		line-name = "func_mode0";
> +	};
> +
> +	pin_func_mode1 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(C, 5)  GPIO_ACTIVE_HIGH>;
> +		output-low;
> +		line-name = "func_mode1";
> +	};
> +
> +	pin_func_mode2 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
> +		output-low;
> +		line-name = "func_mode2";
> +	};
> +
> +	pin_gpio_a0 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
> +		input;
> +		line-name = "BMC_FAN_RESERVED_N";
> +	};
> +
> +	pin_gpio_a1 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
> +		output-high;
> +		line-name = "APSS_WDT_N";
> +	};
> +
> +	pin_gpio_b1 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
> +		output-high;
> +		line-name = "APSS_BOOT_MODE";
> +	};
> +
> +	pin_gpio_b2 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
> +		output-high;
> +		line-name = "APSS_RESET_N";
> +	};
> +
> +	pin_gpio_b7 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
> +		output-high;
> +		line-name = "SPIVID_STBY_RESET_N";
> +	};
> +
> +	pin_gpio_d1 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
> +		output-high;
> +		line-name = "BMC_POWER_UP";
> +	};
> +
> +	pin_gpio_f1 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
> +		input;
> +		line-name = "BMC_BATTERY_TEST";
> +	};
> +
> +	pin_gpio_f4 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
> +		input;
> +		line-name = "AST_HW_FAULT_N";
> +	};
> +
> +	pin_gpio_f5 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
> +		input;
> +		line-name = "AST_SYS_FAULT_N";
> +	};
> +
> +	pin_gpio_f7 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
> +		output-high;
> +		line-name = "BMC_FULL_SPEED_N";
> +	};
> +
> +	pin_gpio_g3 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
> +		output-high;
> +		line-name = "BMC_FAN_ERROR_N";
> +	};
> +
> +	pin_gpio_g4 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
> +		input;
> +		line-name = "BMC_WDT_RST1_P";
> +	};
> +
> +	pin_gpio_g5 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
> +		input;
> +		line-name = "BMC_WDT_RST2_P";
> +	};
> +
> +	pin_gpio_h0 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
> +		input;
> +		line-name = "PE_SLOT_TEST_EN_N";
> +	};
> +
> +	pin_gpio_h1 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
> +		input;
> +		line-name = "BMC_RTCRST_N";
> +	};
> +
> +	pin_gpio_h2 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
> +		output-high;
> +		line-name = "SYS_PWROK_BMC";
> +	};
> +
> +	pin_gpio_h6 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
> +		output-high;
> +		line-name = "SCM1_FSI0_DATA_EN";
> +	};
> +
> +	pin_gpio_h7 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
> +		output-high;
> +		line-name = "BMC_TPM_INT_N";
> +	};
> +};
diff mbox

Patch

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index 2a4a355a779d..bbddfe1d1cc8 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -74,6 +74,14 @@ 
 	};
 };
 
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flbusy_default &pinctrl_flwp_default
+
+			&pinctrl_vgahs_default &pinctrl_vgavs_default
+			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
 &uart5 {
 	status = "okay";
 };
@@ -142,3 +150,152 @@ 
 &ibt {
 	status = "okay";
 };
+
+&gpio {
+	pin_func_mode0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode0";
+	};
+
+	pin_func_mode1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 5)  GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode1";
+	};
+
+	pin_func_mode2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode2";
+	};
+
+	pin_gpio_a0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_FAN_RESERVED_N";
+	};
+
+	pin_gpio_a1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_WDT_N";
+	};
+
+	pin_gpio_b1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_BOOT_MODE";
+	};
+
+	pin_gpio_b2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_RESET_N";
+	};
+
+	pin_gpio_b7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPIVID_STBY_RESET_N";
+	};
+
+	pin_gpio_d1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_POWER_UP";
+	};
+
+	pin_gpio_f1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_BATTERY_TEST";
+	};
+
+	pin_gpio_f4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "AST_HW_FAULT_N";
+	};
+
+	pin_gpio_f5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "AST_SYS_FAULT_N";
+	};
+
+	pin_gpio_f7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FULL_SPEED_N";
+	};
+
+	pin_gpio_g3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FAN_ERROR_N";
+	};
+
+	pin_gpio_g4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_WDT_RST1_P";
+	};
+
+	pin_gpio_g5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_WDT_RST2_P";
+	};
+
+	pin_gpio_h0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PE_SLOT_TEST_EN_N";
+	};
+
+	pin_gpio_h1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_RTCRST_N";
+	};
+
+	pin_gpio_h2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SYS_PWROK_BMC";
+	};
+
+	pin_gpio_h6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SCM1_FSI0_DATA_EN";
+	};
+
+	pin_gpio_h7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_TPM_INT_N";
+	};
+};