@@ -14,6 +14,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/samsung-i2s.h>
/ {
aliases {
@@ -112,8 +113,8 @@
sound {
compatible = "samsung,tm2-audio";
- audio-codec = <&wm5110>;
- i2s-controller = <&i2s0>;
+ audio-codec = <&wm5110>, <&hdmi>;
+ i2s-controller = <&i2s0 0>, <&i2s1 0>;
audio-amplifier = <&max98504>;
mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
model = "wm5110";
@@ -217,8 +218,40 @@
};
&cmu_aud {
- assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
- assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
+ assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
+ <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>,
+ <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>,
+ <&cmu_top CLK_MOUT_AUD_PLL>,
+ <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
+ <&cmu_top CLK_MOUT_SCLK_AUDIO0>,
+ <&cmu_top CLK_MOUT_SCLK_AUDIO1>,
+ <&cmu_top CLK_MOUT_SCLK_SPDIF>,
+
+ <&cmu_aud CLK_DIV_AUD_CA5>,
+ <&cmu_aud CLK_DIV_ACLK_AUD>,
+ <&cmu_aud CLK_DIV_PCLK_DBG_AUD>,
+ <&cmu_aud CLK_DIV_SCLK_AUD_I2S>,
+ <&cmu_aud CLK_DIV_SCLK_AUD_PCM>,
+ <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>,
+ <&cmu_aud CLK_DIV_SCLK_AUD_UART>,
+ <&cmu_top CLK_DIV_SCLK_AUDIO0>,
+ <&cmu_top CLK_DIV_SCLK_AUDIO1>,
+ <&cmu_top CLK_DIV_SCLK_PCM1>,
+ <&cmu_top CLK_DIV_SCLK_I2S1>;
+
+ assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>,
+ <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
+ <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
+ <&cmu_top CLK_FOUT_AUD_PLL>,
+ <&cmu_top CLK_MOUT_AUD_PLL>,
+ <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
+ <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
+ <&cmu_top CLK_SCLK_AUDIO0>;
+
+ assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
+ <196608001>, <65536001>, <32768001>, <49152001>,
+ <2048001>, <24576001>, <196608001>,
+ <24576001>, <98304001>, <2048001>, <49152001>;
};
&cmu_fsys {
@@ -267,6 +300,11 @@
<&cmu_top CLK_MOUT_BUS_PLL_USER>;
};
+&cmu_top {
+ assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>;
+ assigned-clock-rates = <196608001>;
+};
+
&cpu0 {
cpu-supply = <&buck3_reg>;
};
@@ -838,6 +876,12 @@
status = "okay";
};
+&i2s1 {
+ assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>;
+ assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>;
+ status = "okay";
+};
+
&mshc_0 {
status = "okay";
mmc-hs200-1_8v;
@@ -969,6 +969,7 @@
ddc = <&hsi2c_11>;
samsung,syscon-phandle = <&pmu_system_controller>;
samsung,sysreg-phandle = <&syscon_disp>;
+ #sound-dai-cells = <0>;
status = "disabled";
};
This patch updates the sound node of the exynos5433-tm2 board and adds clock tree configuration in order to support HDMI sound. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> --- Changes since v2: - nodes sorted alphabetically, changed the assigned clock frequencies. Changes since v1: - dropped unnecessary assigned-clock* properties for AUD PLL in cmu_top node, - changed default AUD PLL frequency so it is within recommended 252...400 MHz range. --- .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 52 ++++++++++++++++++++-- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1 + 2 files changed, 49 insertions(+), 4 deletions(-)