diff --git a/arch/arm/mach-omap2/sleep33xx.S b/arch/arm/mach-omap2/sleep33xx.S
new file mode 100644
index 000000000000..481833c6be94
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep33xx.S
@@ -0,0 +1,220 @@
+/*
+ * Low level suspend code for AM33XX SoCs
+ *
+ * Copyright (C) 2012-2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Dave Gerlach, Vaibhav Bedia
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/linkage.h>
+#include <linux/ti-emif-sram.h>
+#include <asm/assembler.h>
+#include <asm/memory.h>
+
+#include "iomap.h"
+#include "cm33xx.h"
+
+#define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED			0x00030000
+#define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE			0x0003
+#define AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE			0x0002
+
+	.arm
+	.align 3
+
+ENTRY(am33xx_do_wfi)
+	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
+
+	/*
+	 * Flush all data from the L1 and L2 data cache before disabling
+	 * SCTLR.C bit.
+	 */
+	ldr	r1, kernel_flush
+	blx	r1
+
+	/*
+	 * Clear the SCTLR.C bit to prevent further data cache
+	 * allocation. Clearing SCTLR.C would make all the data accesses
+	 * strongly ordered and would not hit the cache.
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #(1 << 2)	@ Disable the C bit
+	mcr	p15, 0, r0, c1, c0, 0
+	isb
+
+	/*
+	 * Invalidate L1 and L2 data cache.
+	 */
+	ldr	r1, kernel_flush
+	blx	r1
+
+	adr	r9, am33xx_emif_sram_table
+
+	ldr	r3, [r9, #EMIF_PM_ENTER_SR_OFFSET]
+	blx	r3
+
+	ldr	r3, [r9, #EMIF_PM_SAVE_CONTEXT_OFFSET]
+	blx	r3
+
+	/* Disable EMIF */
+	ldr     r1, virt_emif_clkctrl
+	ldr     r2, [r1]
+	bic     r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
+	str     r2, [r1]
+
+	ldr	r1, virt_emif_clkctrl
+wait_emif_disable:
+	ldr	r2, [r1]
+	mov	r3, #AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED
+	cmp	r2, r3
+	bne	wait_emif_disable
+
+	/*
+	 * For the MPU WFI to be registered as an interrupt
+	 * to WKUP_M3, MPU_CLKCTRL.MODULEMODE needs to be set
+	 * to DISABLED
+	 */
+	ldr	r1, virt_mpu_clkctrl
+	ldr	r2, [r1]
+	bic	r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
+	str	r2, [r1]
+
+	/*
+	 * Execute an ISB instruction to ensure that all of the
+	 * CP15 register changes have been committed.
+	 */
+	isb
+
+	/*
+	 * Execute a barrier instruction to ensure that all cache,
+	 * TLB and branch predictor maintenance operations issued
+	 * have completed.
+	 */
+	dsb
+	dmb
+
+	/*
+	 * Execute a WFI instruction and wait until the
+	 * STANDBYWFI output is asserted to indicate that the
+	 * CPU is in idle and low power state. CPU can specualatively
+	 * prefetch the instructions so add NOPs after WFI. Thirteen
+	 * NOPs as per Cortex-A8 pipeline.
+	 */
+	wfi
+
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	/* We come here in case of an abort due to a late interrupt */
+
+	/* Set MPU_CLKCTRL.MODULEMODE back to ENABLE */
+	ldr	r1, virt_mpu_clkctrl
+	mov	r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+	str	r2, [r1]
+
+	/* Re-enable EMIF */
+	ldr	r1, virt_emif_clkctrl
+	mov	r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+	str	r2, [r1]
+wait_emif_enable:
+	ldr	r3, [r1]
+	cmp	r2, r3
+	bne	wait_emif_enable
+
+
+	ldr	r1, [r9, #EMIF_PM_ABORT_SR_OFFSET]
+	blx	r1
+
+	/*
+	 * Set SCTLR.C bit to allow data cache allocation
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	orr	r0, r0, #(1 << 2)	@ Enable the C bit
+	mcr	p15, 0, r0, c1, c0, 0
+	isb
+
+	/* Let the suspend code know about the abort */
+	mov	r0, #1
+	ldmfd	sp!, {r4 - r11, pc}	@ restore regs and return
+ENDPROC(am33xx_do_wfi)
+
+	.align
+ENTRY(am33xx_resume_offset)
+	.word . - am33xx_do_wfi
+
+ENTRY(am33xx_resume_from_deep_sleep)
+	/* Re-enable EMIF */
+	ldr	r0, phys_emif_clkctrl
+	mov	r1, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+	str	r1, [r0]
+wait_emif_enable1:
+	ldr	r2, [r0]
+	cmp	r1, r2
+	bne	wait_emif_enable1
+
+	adr	r9, am33xx_emif_sram_table
+
+	ldr	r1, [r9, #EMIF_PM_RESTORE_CONTEXT_OFFSET]
+	blx	r1
+
+	ldr	r1, [r9, #EMIF_PM_EXIT_SR_OFFSET]
+	blx	r1
+
+resume_to_ddr:
+	/* We are back. Branch to the common CPU resume routine */
+	mov	r0, #0
+	ldr	pc, resume_addr
+ENDPROC(am33xx_resume_from_deep_sleep)
+
+/*
+ * Local variables
+ */
+	.align
+resume_addr:
+	.word	cpu_resume - PAGE_OFFSET + 0x80000000
+kernel_flush:
+	.word   v7_flush_dcache_all
+virt_mpu_clkctrl:
+	.word	AM33XX_CM_MPU_MPU_CLKCTRL
+virt_emif_clkctrl:
+	.word	AM33XX_CM_PER_EMIF_CLKCTRL
+phys_emif_clkctrl:
+	.word	(AM33XX_CM_BASE + AM33XX_CM_PER_MOD + \
+		AM33XX_CM_PER_EMIF_CLKCTRL_OFFSET)
+
+.align 3
+/* DDR related defines */
+am33xx_emif_sram_table:
+	.space EMIF_PM_FUNCTIONS_SIZE
+
+ENTRY(am33xx_pm_sram)
+	.word am33xx_do_wfi
+	.word am33xx_do_wfi_sz
+	.word am33xx_resume_offset
+	.word am33xx_emif_sram_table
+	.word am33xx_pm_ro_sram_data
+
+.align 3
+ENTRY(am33xx_pm_ro_sram_data)
+	.space AMX3_PM_RO_SRAM_DATA_SIZE
+
+ENTRY(am33xx_do_wfi_sz)
+	.word	. - am33xx_do_wfi
