diff mbox

[v2,3/8,3/8] ARM: dts: aspeed: peci: Add PECI node

Message ID 20180221161606.32247-4-jae.hyun.yoo@linux.intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jae Hyun Yoo Feb. 21, 2018, 4:16 p.m. UTC 
This commit adds PECI bus/adapter node of AST24xx/AST25xx into
aspeed-g4 and aspeed-g5.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 25 +++++++++++++++++++++++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 25 +++++++++++++++++++++++++
 2 files changed, 50 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b0d8431a3700..077b4d6795b8 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -29,6 +29,7 @@ 
 		serial3 = &uart4;
 		serial4 = &uart5;
 		serial5 = &vuart;
+		peci0 = &peci0;
 	};
 
 	cpus {
@@ -250,6 +251,13 @@ 
 				};
 			};
 
+			peci: peci@1e78b000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e78b000 0x60>;
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
@@ -290,6 +298,23 @@ 
 	};
 };
 
+&peci {
+	peci0: peci-bus@0 {
+		compatible = "aspeed,ast2400-peci";
+		reg = <0x0 0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <15>;
+		clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+		clock-frequency = <24000000>;
+		msg-timing-nego = <1>;
+		addr-timing-nego = <1>;
+		rd-sampling-point = <8>;
+		cmd-timeout-ms = <1000>;
+		status = "disabled";
+	};
+};
+
 &i2c {
 	i2c_ic: interrupt-controller@0 {
 		#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 40de3b66c33f..5d3b5e177a32 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -29,6 +29,7 @@ 
 		serial3 = &uart4;
 		serial4 = &uart5;
 		serial5 = &vuart;
+		peci0 = &peci0;
 	};
 
 	cpus {
@@ -301,6 +302,13 @@ 
 				};
 			};
 
+			peci: peci@1e78b000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e78b000 0x60>;
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
@@ -341,6 +349,23 @@ 
 	};
 };
 
+&peci {
+	peci0: peci-bus@0 {
+		compatible = "aspeed,ast2500-peci";
+		reg = <0x0 0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <15>;
+		clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+		clock-frequency = <24000000>;
+		msg-timing-nego = <1>;
+		addr-timing-nego = <1>;
+		rd-sampling-point = <8>;
+		cmd-timeout-ms = <1000>;
+		status = "disabled";
+	};
+};
+
 &i2c {
 	i2c_ic: interrupt-controller@0 {
 		#interrupt-cells = <1>;