| Message ID | 20180222041524.17867-1-joel@jms.id.au (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, 22 Feb 2018, at 14:45, Joel Stanley wrote: > The Palmetto BMC has a UART connected to a RS-232 transceiver designed > to be used as a serial console for the host processor. It appears as a > D-sub connector on the back of the chassis. > > Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > --- > arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/ > boot/dts/aspeed-bmc-opp-palmetto.dts > index bbddfe1d1cc8..b7d3d1825b93 100644 > --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts > +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts > @@ -82,6 +82,21 @@ > &pinctrl_ddcclk_default &pinctrl_ddcdat_default>; > }; > > +&uart1 { > + /* Rear RS-232 connector */ > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd1_default > + &pinctrl_rxd1_default > + &pinctrl_nrts1_default > + &pinctrl_ndtr1_default > + &pinctrl_ndsr1_default > + &pinctrl_ncts1_default > + &pinctrl_ndcd1_default > + &pinctrl_nri1_default>; > +}; > + > &uart5 { > status = "okay"; > }; > -- > 2.15.1 >
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index bbddfe1d1cc8..b7d3d1825b93 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -82,6 +82,21 @@ &pinctrl_ddcclk_default &pinctrl_ddcdat_default>; }; +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + &uart5 { status = "okay"; };
The Palmetto BMC has a UART connected to a RS-232 transceiver designed to be used as a serial console for the host processor. It appears as a D-sub connector on the back of the chassis. Signed-off-by: Joel Stanley <joel@jms.id.au> --- arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+)