@@ -254,21 +254,17 @@ static void txx9ndfmc_initialize(struct platform_device *dev)
#define TXX9NDFMC_NS_TO_CYC(gbusclk, ns) \
DIV_ROUND_UP((ns) * DIV_ROUND_UP(gbusclk, 1000), 1000000)
-static int txx9ndfmc_nand_scan(struct mtd_info *mtd)
+static int txx9ndfmc_attach_chip(struct nand_chip *chip)
{
- struct nand_chip *chip = mtd_to_nand(mtd);
- int ret;
+ struct mtd_info *mtd = nand_to_mtd(chip);
- ret = nand_scan_ident(mtd, 1, NULL);
- if (!ret) {
- if (mtd->writesize >= 512) {
- /* Hardware ECC 6 byte ECC per 512 Byte data */
- chip->ecc.size = 512;
- chip->ecc.bytes = 6;
- }
- ret = nand_scan_tail(mtd);
+ if (mtd->writesize >= 512) {
+ /* Hardware ECC 6 byte ECC per 512 Byte data */
+ chip->ecc.size = 512;
+ chip->ecc.bytes = 6;
}
- return ret;
+
+ return 0;
}
static int __init txx9ndfmc_probe(struct platform_device *dev)
@@ -332,7 +328,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
chip->ecc.correct = txx9ndfmc_correct_data;
chip->ecc.hwctl = txx9ndfmc_enable_hwecc;
chip->ecc.mode = NAND_ECC_HW;
- /* txx9ndfmc_nand_scan will overwrite ecc.size and ecc.bytes */
+ /* nand_scan() will overwrite ecc.size and ecc.bytes */
chip->ecc.size = 256;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
@@ -359,7 +355,8 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
if (plat->wide_mask & (1 << i))
chip->options |= NAND_BUSWIDTH_16;
- if (txx9ndfmc_nand_scan(mtd)) {
+ chip->ecc.attach_chip = txx9ndfmc_attach_chip;
+ if (nand_scan(mtd, 1)) {
kfree(txx9_priv->mtdname);
kfree(txx9_priv);
continue;
Two helpers have been added to the core to make ECC-related configuration between the detection phase and the final NAND scan. Use these hooks and convert the driver to just use nand_scan() instead of both nand_scan_ident() and nand_scan_tail(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/mtd/nand/raw/txx9ndfmc.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-)