@@ -7,9 +7,10 @@
#include "bcm4708.dtsi"
/ {
- usb3_phy: usb3-phy {
- compatible = "brcm,ns-bx-usb3-phy";
- };
+};
+
+&usb3_phy {
+ compatible = "brcm,ns-bx-usb3-phy";
};
&uart0 {
@@ -154,13 +154,6 @@
clock-names = "phy-ref-clk";
};
- usb3_phy: usb3-phy {
- compatible = "brcm,ns-ax-usb3-phy";
- reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
- reg-names = "dmp", "ccb-mii";
- #phy-cells = <0>;
- };
-
axi@18000000 {
compatible = "brcm,bus-axi";
reg = <0x18000000 0x1000>;
@@ -359,7 +352,32 @@
reg = <0x18003000 0x8>;
#size-cells = <1>;
#address-cells = <0>;
- status = "disabled";
+ };
+
+ mdio-bus-mux {
+ compatible = "mdio-mux-mmioreg";
+ mdio-parent-bus = <&mdio>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x18003000 0x4>;
+ mux-mask = <0x200>;
+
+ mdio_int: mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3_phy: usb3-phy@10 {
+ compatible = "brcm,ns-ax-usb3-phy";
+ reg = <0x10>;
+ usb3-dmp-syscon = <&usb3_dmp>;
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ usb3_dmp: syscon@18105000 {
+ reg = <0x18105000 0x1000>;
};
i2c0: i2c@18009000 {
Currently, usb3 phy in bcm5301x.dtsi uses platform driver which requires register range "ccb-mii" <0x18003000 0x1000>. This range overlaps with mdio cmd and param registers (<0x18003000 0x8>). Essentially, the platform driver partly acts like a mdio bus driver, hence to use of this register range. In some Northstar devices like Linksys EA9500, secondary switch is connected via external mdio. The only way to access and configure the external switch is via mdio bus. When we enable the mdio bus in it's current state, the mdio bus and any child buses fail to register because of the register range overlap. On Northstar, the usb3 phy is connected at address 0x10 on the internal mdio bus. This change moves the usb3_phy node and makes it a child node of internal mdio bus. Thanks to Rafał Miłecki's commit af850e14a7ae ("phy: bcm-ns-usb3: add MDIO driver using proper bus layer") the same usb3 platform driver can now act as usb3 phy mdio driver. Tested on Linksys Panamera (EA9500) Signed-off-by: Vivek Unune <npcomplete13@gmail.com> --- arch/arm/boot/dts/bcm47094.dtsi | 7 ++++--- arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++-------- 2 files changed, 30 insertions(+), 11 deletions(-)