diff mbox

[1/3] ARM: imx_v6_v7_defconfig: add RN5T618 PMIC family support

Message ID 20180318201510.13086-1-stefan@agner.ch (mailing list archive)
State New, archived
Headers show

Commit Message

Stefan Agner March 18, 2018, 8:15 p.m. UTC 
This allows to successfully boot Colibri iMX7 which is using
the Ricoh RN5T567 PMIC.

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
 arch/arm/configs/imx_v6_v7_defconfig | 3 +++
 1 file changed, 3 insertions(+)

Comments

Shawn Guo April 16, 2018, 2:51 p.m. UTC | #1 
On Sun, Mar 18, 2018 at 09:15:08PM +0100, Stefan Agner wrote:
> This allows to successfully boot Colibri iMX7 which is using
> the Ricoh RN5T567 PMIC.
> 
> Signed-off-by: Stefan Agner <stefan@agner.ch>

Applied all, thanks.
diff mbox

Patch

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 3a308437b088..8947769cd449 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -214,11 +214,13 @@  CONFIG_CPU_THERMAL=y
 CONFIG_IMX_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_DA9062_WATCHDOG=y
+CONFIG_RN5T618_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_DA9052_I2C=y
 CONFIG_MFD_DA9062=y
 CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_MFD_MC13XXX_I2C=y
+CONFIG_MFD_RN5T618=y
 CONFIG_MFD_STMPE=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -229,6 +231,7 @@  CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_REGULATOR_PFUZE100=y
+CONFIG_REGULATOR_RN5T618=y
 CONFIG_RC_CORE=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_GPIO_CIR=y