diff mbox

[3/3] ARM: dts: at91sam9260: pullup rx on usart0

Message ID 20180321153552.29213-4-peda@axentia.se (mailing list archive)
State New, archived
Headers show

Commit Message

Peter Rosin March 21, 2018, 3:35 p.m. UTC 
For consistency with all other serial pins, add this pullup. It also
prevents the signal from floating and so consuming a useless extra amount
of power in crowbarred state if nothing is connected to RX.

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 arch/arm/boot/dts/at91sam9260.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 3ae7e6c55fe4..9118e29b6d6a 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -434,8 +434,8 @@ 
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB5 periph A */
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart0_rts: usart0_rts-0 {