@@ -49,37 +49,6 @@
status = "okay";
};
- flash@d0000 {
- status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
- nand-ecc-strength = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x800000>;
- };
- partition@800000 {
- label = "Linux";
- reg = <0x800000 0x800000>;
- };
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
- };
- };
- };
-
/* CON98 */
usb3@f8000 {
status = "okay";
@@ -136,3 +105,38 @@
};
};
};
+
+&nand_controller {
+ status = "okay";
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition@800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+ };
+};
@@ -57,41 +57,6 @@
status = "okay";
};
- flash@d0000 {
- status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0x00000000 0x00600000>;
- read-only;
- };
-
- partition@800000 {
- label = "uImage";
- reg = <0x00600000 0x00400000>;
- read-only;
- };
-
- partition@1000000 {
- label = "Root";
- reg = <0x00a00000 0x3f600000>;
- };
- };
- };
-
/* CON18 */
sdhci@d8000 {
clock-frequency = <200000000>;
@@ -130,3 +95,42 @@
};
};
};
+
+&nand_controller {
+ status = "okay";
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x00000000 0x00600000>;
+ read-only;
+ };
+
+ partition@800000 {
+ label = "uImage";
+ reg = <0x00600000 0x00400000>;
+ read-only;
+ };
+
+ partition@1000000 {
+ label = "Root";
+ reg = <0x00a00000 0x3f600000>;
+ };
+ };
+ };
+};
@@ -51,31 +51,6 @@
status = "okay";
};
- flash@d0000 {
- status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
- nand-ecc-strength = <8>;
- nand-ecc-step-size = <512>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x800000>;
- };
- partition@800000 {
- label = "Linux";
- reg = <0x800000 0x800000>;
- };
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
- };
- };
-
usb3@f8000 {
status = "okay";
};
@@ -122,3 +97,38 @@
};
};
};
+
+&nand_controller {
+ status = "okay";
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition@800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+ };
+};
@@ -367,11 +367,11 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
};
- flash@d0000 {
- compatible = "marvell,armada370-nand";
+ nand_controller: nand-controller@d0000 {
+ compatible = "marvell,armada370-nand-controller";
reg = <0xd0000 0x54>;
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coredivclk 0>;
status = "disabled";
Use the new bindings of the Marvell NAND controller driver. Also adapt the NAND controller node organization to distinguish which property is relevant for the controller, and which one is NAND chip specific. Expose the partitions as a subnode of the NAND chip. Remove the 'marvell,nand-enable-arbiter' property, not needed anymore as the new driver activates the arbiter by default for all boards which is either needed or harmless. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- arch/arm/boot/dts/armada-390-db.dts | 66 +++++++++++++++++---------------- arch/arm/boot/dts/armada-395-gp.dts | 74 +++++++++++++++++++------------------ arch/arm/boot/dts/armada-398-db.dts | 60 +++++++++++++++++------------- arch/arm/boot/dts/armada-39x.dtsi | 6 +-- 4 files changed, 112 insertions(+), 94 deletions(-)