diff mbox

[04/21] i2c: aspeed: make use of i2c_8bit_addr_from_msg

Message ID 20180514145330.4857-5-peda@axentia.se (mailing list archive)
State New, archived
Headers show

Commit Message

Peter Rosin May 14, 2018, 2:53 p.m. UTC 
Because it looks neater.

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 drivers/i2c/busses/i2c-aspeed.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 7d4aeb4465b3..60e4d0e939a3 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -335,13 +335,12 @@  static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus)
 {
 	u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
 	struct i2c_msg *msg = &bus->msgs[bus->msgs_index];
-	u8 slave_addr = msg->addr << 1;
+	u8 slave_addr = i2c_8bit_addr_from_msg(msg);
 
 	bus->master_state = ASPEED_I2C_MASTER_START;
 	bus->buf_index = 0;
 
 	if (msg->flags & I2C_M_RD) {
-		slave_addr |= 1;
 		command |= ASPEED_I2CD_M_RX_CMD;
 		/* Need to let the hardware know to NACK after RX. */
 		if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN))