[v2] arm64: dts: qcom: sdm845: Sort nodes in the soc by address

Commit Message

Doug Anderson May 15, 2018, 3:59 a.m. UTC

This is pure-churn and should be a no-op.  I'm doing it in the hopes
of reducing merge conflicts.  When things are sorted in a sane way
(and by base address seems sane) then it's less likely that future
patches will cause merge conflicts.

Signed-off-by: Douglas Anderson <[e-mail]>
Acked-by: Bjorn Andersson <[e-mail]>
---

Changes in v2:
- rebase atop tree today

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 96 ++++++++++++++--------------
 1 file changed, 48 insertions(+), 48 deletions(-)

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 7c85e7c596db..96dd4b2a41d6 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -198,6 +198,54 @@ 
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdm845";
+			reg = <0x100000 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		tcsr_mutex_regs: syscon@1f40000 {
+			compatible = "syscon";
+			reg = <0x1f40000 0x40000>;
+		};
+
+		tlmm: pinctrl@3400000 {
+			compatible = "qcom,sdm845-pinctrl";
+			reg = <0x03400000 0xc00000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0xc440000 0x1100>,
+			      <0xc600000 0x2000000>,
+			      <0xe600000 0x100000>,
+			      <0xe700000 0xa0000>,
+			      <0xc40a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		apss_shared: mailbox@17990000 {
+			compatible = "qcom,sdm845-apss-shared";
+			reg = <0x17990000 0x1000>;
+			#mbox-cells = <1>;
+		};
+
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			#address-cells = <1>;
@@ -218,24 +266,6 @@ 
 			};
 		};
 
-		gcc: clock-controller@100000 {
-			compatible = "qcom,gcc-sdm845";
-			reg = <0x100000 0x1f0000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
-
-		tlmm: pinctrl@3400000 {
-			compatible = "qcom,sdm845-pinctrl";
-			reg = <0x03400000 0xc00000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
 		timer@17c90000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -293,35 +323,5 @@ 
 				status = "disabled";
 			};
 		};
-
-		spmi_bus: spmi@c440000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0xc440000 0x1100>,
-			      <0xc600000 0x2000000>,
-			      <0xe600000 0x100000>,
-			      <0xe700000 0xa0000>,
-			      <0xc40a000 0x26000>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-			cell-index = <0>;
-		};
-
-		tcsr_mutex_regs: syscon@1f40000 {
-			compatible = "syscon";
-			reg = <0x1f40000 0x40000>;
-		};
-
-		apss_shared: mailbox@17990000 {
-			compatible = "qcom,sdm845-apss-shared";
-			reg = <0x17990000 0x1000>;
-			#mbox-cells = <1>;
-		};
 	};
 };