diff mbox

[1/2] ARM: pxa: dts: add gpio-ranges to gpio controller

Message ID 20180521220044.821-1-daniel@zonque.org (mailing list archive)
State New, archived
Headers show

Commit Message

Daniel Mack May 21, 2018, 10 p.m. UTC 
The PXA GPIO driver calls out to the pinctrl driver for claiming pins
unless the config has CONFIG_PINCTRL unset. IOW, if a pinctrl driver is
active, it must be visible to the GPIO driver.

Signed-off-by: Daniel Mack <daniel@zonque.org>
---
 arch/arm/boot/dts/pxa3xx.dtsi | 1 +
 1 file changed, 1 insertion(+)

Comments

Robert Jarzmik May 22, 2018, 7:19 p.m. UTC | #1 
Daniel Mack <daniel@zonque.org> writes:

> The PXA GPIO driver calls out to the pinctrl driver for claiming pins
> unless the config has CONFIG_PINCTRL unset. IOW, if a pinctrl driver is
> active, it must be visible to the GPIO driver.
>
> Signed-off-by: Daniel Mack <daniel@zonque.org>
Applied to pxa/dt, thanks.

Cheers.

--
Robert
diff mbox

Patch

diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index 982d1a62661d..a13ac52e4fd2 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -148,6 +148,7 @@ 
 			compatible = "intel,pxa3xx-gpio";
 			reg = <0x40e00000 0x10000>;
 			clocks = <&clks CLK_GPIO>;
+			gpio-ranges = <&pinctrl 0 0 128>;
 			interrupt-names = "gpio0", "gpio1", "gpio_mux";
 			interrupts = <8 9 10>;
 			gpio-controller;