| Message ID | 20180523083013.7570-1-daniel@zonque.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, May 23, 2018 at 10:30:12AM +0200, Daniel Mack wrote: > The touchscreen driver no longer configures the device as wakeup source by > default. A "wakeup-source" property is needed. > > Signed-off-by: Daniel Mack <daniel@zonque.org> Applied, thanks.
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts index e0728d475f6f..7537d77b3415 100644 --- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts +++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts @@ -179,6 +179,7 @@ touchscreen-size-y = <480>; touchscreen-inverted-x; touchscreen-inverted-y; + wakeup-source; }; rtc@68 { diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index aab088f318e8..aef4a756ca81 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -292,6 +292,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; rtc@6f { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 87ca6ead4098..9cb464b65be1 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -442,6 +442,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index f5b763d39285..5e4da6d6fcff 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -360,6 +360,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 596866b0a0d2..a14872436c5e 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -370,6 +370,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; };
The touchscreen driver no longer configures the device as wakeup source by default. A "wakeup-source" property is needed. Signed-off-by: Daniel Mack <daniel@zonque.org> --- arch/arm/boot/dts/imx6q-var-dt6customboard.dts | 1 + arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 1 + arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 1 + arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 1 + arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 1 + 5 files changed, 5 insertions(+)