| Message ID | 20180607134748.2970-3-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Jun 07, 2018 at 07:17:48PM +0530, Jagan Teki wrote: > From: Michael Trimarchi <michael@amarulasolutions.com> > > Add USB host and device support for BTicino i.MX6DL Mamoj board. > > Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> > Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it> > Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> > --- > Changes for v2: > - collect Fabio r-w-b tag > > arch/arm/boot/dts/imx6dl-mamoj.dts | 27 +++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts > index 5034b086035f..a727e1471006 100644 > --- a/arch/arm/boot/dts/imx6dl-mamoj.dts > +++ b/arch/arm/boot/dts/imx6dl-mamoj.dts > @@ -134,6 +134,17 @@ > vin-supply = <®_lcd_vgl>; > }; > > + reg_usb_host: regulator-usb-vbus { > + compatible = "regulator-fixed"; > + regulator-name = "usbhost-vbus"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbhost>; > + regulator-min-microvolt = <50000000>; > + regulator-max-microvolt = <50000000>; > + gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > reg_wl18xx_vmmc: regulator-wl18xx-vmcc { > compatible = "regulator-fixed"; > regulator-name = "vwl1807"; > @@ -297,6 +308,16 @@ > status = "okay"; > }; > > +&usbh1 { > + vbus-supply = <®_usb_host>; > + status = "okay"; > +}; > + > +&usbotg { > + dr_mode = "peripheral"; > + status = "okay"; > +}; > + > &usdhc1 { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usdhc1>; > @@ -428,6 +449,12 @@ > >; > }; > > + pinctrl_usbhost: usbhost { usbhostgrp. Shawn > + fsl,pins = < > + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0 > + >; > + }; > + > pinctrl_usdhc1: usdhc1grp { > fsl,pins = < > MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17069 > -- > 2.14.3 >
diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts index 5034b086035f..a727e1471006 100644 --- a/arch/arm/boot/dts/imx6dl-mamoj.dts +++ b/arch/arm/boot/dts/imx6dl-mamoj.dts @@ -134,6 +134,17 @@ vin-supply = <®_lcd_vgl>; }; + reg_usb_host: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbhost-vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhost>; + regulator-min-microvolt = <50000000>; + regulator-max-microvolt = <50000000>; + gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_wl18xx_vmmc: regulator-wl18xx-vmcc { compatible = "regulator-fixed"; regulator-name = "vwl1807"; @@ -297,6 +308,16 @@ status = "okay"; }; +&usbh1 { + vbus-supply = <®_usb_host>; + status = "okay"; +}; + +&usbotg { + dr_mode = "peripheral"; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -428,6 +449,12 @@ >; }; + pinctrl_usbhost: usbhost { + fsl,pins = < + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17069