@@ -40,8 +40,7 @@ static struct fiq_handler fh = {
* keystrokes received from the qwerty keyboard. See
* <linux/platform_data/ams-delta-fiq.h> for details of offsets.
*/
-unsigned int fiq_buffer[1024];
-EXPORT_SYMBOL(fiq_buffer);
+static unsigned int fiq_buffer[1024];
static struct irq_chip *irq_chip;
static struct irq_data *irq_data[16];
@@ -203,9 +202,10 @@ void __init ams_delta_init_fiq(struct gpio_chip *chip,
val = omap_readl(OMAP_IH1_BASE + offset) | 1;
omap_writel(val, OMAP_IH1_BASE + offset);
- /* Initialize serio device IRQ resource */
+ /* Initialize serio device IRQ resource and platform_data */
serio->resource[0].start = gpiod_to_irq(clk);
serio->resource[0].end = serio->resource[0].start;
+ serio->dev.platform_data = fiq_buffer;
return;
@@ -520,6 +520,14 @@ static struct resource ams_delta_serio_resources[] = {
static struct platform_device ams_delta_serio_device = {
.name = "ams-delta-serio",
.id = PLATFORM_DEVID_NONE,
+ .dev = {
+ /*
+ * Initialize .platform_data explicitly with NULL to
+ * indicate it is going to be used. It will be replaced
+ * with FIQ buffer address as soon as FIQ is initialized.
+ */
+ .platform_data = NULL,
+ },
.num_resources = ARRAY_SIZE(ams_delta_serio_resources),
.resource = ams_delta_serio_resources,
};
@@ -37,6 +37,7 @@ MODULE_LICENSE("GPL");
struct ams_delta_serio {
struct serio *serio;
struct regulator *vcc;
+ unsigned int *fiq_buffer;
};
static int check_data(struct serio *serio, int data)
@@ -66,22 +67,23 @@ static int check_data(struct serio *serio, int data)
static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id)
{
struct ams_delta_serio *priv = dev_id;
- int *circ_buff = &fiq_buffer[FIQ_CIRC_BUFF];
+ int *circ_buff = &priv->fiq_buffer[FIQ_CIRC_BUFF];
int data, dfl;
u8 scancode;
- fiq_buffer[FIQ_IRQ_PEND] = 0;
+ priv->fiq_buffer[FIQ_IRQ_PEND] = 0;
/*
* Read data from the circular buffer, check it
* and then pass it on the serio
*/
- while (fiq_buffer[FIQ_KEYS_CNT] > 0) {
+ while (priv->fiq_buffer[FIQ_KEYS_CNT] > 0) {
- data = circ_buff[fiq_buffer[FIQ_HEAD_OFFSET]++];
- fiq_buffer[FIQ_KEYS_CNT]--;
- if (fiq_buffer[FIQ_HEAD_OFFSET] == fiq_buffer[FIQ_BUF_LEN])
- fiq_buffer[FIQ_HEAD_OFFSET] = 0;
+ data = circ_buff[priv->fiq_buffer[FIQ_HEAD_OFFSET]++];
+ priv->fiq_buffer[FIQ_KEYS_CNT]--;
+ if (priv->fiq_buffer[FIQ_HEAD_OFFSET] ==
+ priv->fiq_buffer[FIQ_BUF_LEN])
+ priv->fiq_buffer[FIQ_HEAD_OFFSET] = 0;
dfl = check_data(priv->serio, data);
scancode = (u8) (data >> 1) & 0xFF;
@@ -116,6 +118,10 @@ static int ams_delta_serio_init(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
+ priv->fiq_buffer = pdev->dev.platform_data;
+ if (!priv->fiq_buffer)
+ return -EINVAL;
+
priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
if (IS_ERR(priv->vcc)) {
err = PTR_ERR(priv->vcc);
@@ -55,8 +55,4 @@
#define FIQ_CIRC_BUFF 30 /*Start of circular buffer */
-#ifndef __ASSEMBLER__
-extern unsigned int fiq_buffer[];
-#endif
-
#endif
Instead of exporting the FIQ buffer symbol to be used in ams-delta-serio driver, pass it to the driver as platform_data. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> --- arch/arm/mach-omap1/ams-delta-fiq.c | 6 +++--- arch/arm/mach-omap1/board-ams-delta.c | 8 ++++++++ drivers/input/serio/ams_delta_serio.c | 20 +++++++++++++------- include/linux/platform_data/ams-delta-fiq.h | 4 ---- 4 files changed, 24 insertions(+), 14 deletions(-)