[RFC,net-next,14/15] net: lora: Prepare Semtech SX1257

Commit Message

Andreas Färber July 1, 2018, 11:08 a.m. UTC

The Semtech SX1257 and Sx1255 are usually used for radios A/B of SX1301.
This will not implement a netdev itself, but rather needs to interface
with SX130x somehow.

Cc: Ben Whitten <[e-mail]>
Cc: Steve deRosier <[e-mail]>
Cc: Mark Brown <[e-mail]>
Cc: Michael Röder <[e-mail]>
Cc: Ken Yu (禹凯) <[e-mail]>
Signed-off-by: Andreas Färber <[e-mail]>
---
 drivers/net/lora/Kconfig  |  7 ++++
 drivers/net/lora/Makefile |  3 ++
 drivers/net/lora/sx1257.c | 96 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 106 insertions(+)
 create mode 100644 drivers/net/lora/sx1257.c

Patch

diff --git a/drivers/net/lora/Kconfig b/drivers/net/lora/Kconfig
index 3e384493cbdd..68c7480d7812 100644
--- a/drivers/net/lora/Kconfig
+++ b/drivers/net/lora/Kconfig
@@ -31,6 +31,13 @@  config LORA_RN2483
 	help
 	  Microchip RN2483/2903
 
+config LORA_SX1257
+	tristate "Semtech SX125x SPI driver"
+	default y
+	depends on SPI
+	help
+	  Semtech SX1255/1257
+
 config LORA_SX1276
 	tristate "Semtech SX127x SPI driver"
 	default y
diff --git a/drivers/net/lora/Makefile b/drivers/net/lora/Makefile
index 6b6870ffbfd8..44c578bde7d5 100644
--- a/drivers/net/lora/Makefile
+++ b/drivers/net/lora/Makefile
@@ -16,6 +16,9 @@  obj-$(CONFIG_LORA_RN2483) += lora-rn2483.o
 lora-rn2483-y := rn2483.o
 lora-rn2483-y += rn2483_cmd.o
 
+obj-$(CONFIG_LORA_SX1257) += lora-sx1257.o
+lora-sx1257-y := sx1257.o
+
 obj-$(CONFIG_LORA_SX1276) += lora-sx1276.o
 lora-sx1276-y := sx1276.o
 
diff --git a/drivers/net/lora/sx1257.c b/drivers/net/lora/sx1257.c
new file mode 100644
index 000000000000..c4e04ee3ec4b
--- /dev/null
+++ b/drivers/net/lora/sx1257.c
@@ -0,0 +1,96 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Semtech SX1255/SX1257 LoRa transceiver
+ *
+ * Copyright (c) 2018 Andreas Färber
+ *
+ * Based on SX1301 HAL code:
+ * Copyright (c) 2013 Semtech-Cycleo
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/spi/spi.h>
+
+static int sx1257_write(struct spi_device *spi, u8 reg, u8 val)
+{
+	u8 buf[2];
+
+	buf[0] = reg | BIT(7);
+	buf[1] = val;
+	return spi_write(spi, buf, 2);
+}
+
+static int sx1257_read(struct spi_device *spi, u8 reg, u8 *val)
+{
+	u8 addr = reg & 0x7f;
+	return spi_write_then_read(spi, &addr, 1, val, 1);
+}
+
+static int sx1257_probe(struct spi_device *spi)
+{
+	u8 val;
+	int ret;
+
+	if (true) {
+		ret = sx1257_read(spi, 0x07, &val);
+		if (ret) {
+			dev_err(&spi->dev, "version read failed\n");
+			return ret;
+		}
+
+		dev_info(&spi->dev, "SX125x version: %02x\n", (unsigned)val);
+	}
+
+	ret = sx1257_write(spi, 0x10, 1 /* + 2 */);
+	if (ret) {
+		dev_err(&spi->dev, "clk write failed\n");
+		return ret;
+	}
+
+	dev_info(&spi->dev, "clk written\n");
+
+	if (true) {
+		ret = sx1257_write(spi, 0x26, 13 + 2 * 16);
+		if (ret) {
+			dev_err(&spi->dev, "xosc write failed\n");
+			return ret;
+		}
+	}
+
+	dev_info(&spi->dev, "SX1257 module probed\n");
+
+	return 0;
+}
+
+static int sx1257_remove(struct spi_device *spi)
+{
+	dev_info(&spi->dev, "SX1257 module removed\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id sx1257_dt_ids[] = {
+	{ .compatible = "semtech,sx1255" },
+	{ .compatible = "semtech,sx1257" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sx1257_dt_ids);
+#endif
+
+static struct spi_driver sx1257_spi_driver = {
+	.driver = {
+		.name = "sx1257",
+		.of_match_table = of_match_ptr(sx1257_dt_ids),
+	},
+	.probe = sx1257_probe,
+	.remove = sx1257_remove,
+};
+
+module_spi_driver(sx1257_spi_driver);
+
+MODULE_DESCRIPTION("SX1257 SPI driver");
+MODULE_AUTHOR("Andreas Färber <[e-mail]>");
+MODULE_LICENSE("GPL");