[15/37] KVM: arm/arm64: vgic: Add group field to struct irq

Commit Message

Marc Zyngier Aug. 13, 2018, 2:57 p.m. UTC

From: Christoffer Dall <[e-mail]>

In preparation for proper group 0 and group 1 support in the vgic, we
add a field in the struct irq to store the group of all interrupts.

We initialize the group to group 0 when emulating GICv2 and to group 1
when emulating GICv3, just like we treat them today.  LPIs are always
group 1.  We also continue to ignore writes from the guest, preserving
existing functionality, for now.

Finally, we also add this field to the vgic debug logic to show the
group for all interrupts.

Reviewed-by: Andrew Jones <[e-mail]>
Signed-off-by: Christoffer Dall <[e-mail]>
Signed-off-by: Marc Zyngier <[e-mail]>
---
 include/kvm/arm_vgic.h         |  1 +
 virt/kvm/arm/vgic/vgic-debug.c |  8 +++++---
 virt/kvm/arm/vgic/vgic-init.c  | 19 +++++++++++++++++--
 virt/kvm/arm/vgic/vgic-its.c   |  1 +
 4 files changed, 24 insertions(+), 5 deletions(-)

Patch

diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index 7e64c463ab4d..c661d0ee6628 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -133,6 +133,7 @@  struct vgic_irq {
 	u8 source;			/* GICv2 SGIs only */
 	u8 active_source;		/* GICv2 SGIs only */
 	u8 priority;
+	u8 group;			/* 0 == group 0, 1 == group 1 */
 	enum vgic_irq_config config;	/* Level or edge */
 
 	/*
diff --git a/virt/kvm/arm/vgic/vgic-debug.c b/virt/kvm/arm/vgic/vgic-debug.c
index 9279e35fefb1..07aa900bac56 100644
--- a/virt/kvm/arm/vgic/vgic-debug.c
+++ b/virt/kvm/arm/vgic/vgic-debug.c
@@ -166,6 +166,7 @@  static void print_dist_state(struct seq_file *s, struct vgic_dist *dist)
 
 	seq_printf(s, "P=pending_latch, L=line_level, A=active\n");
 	seq_printf(s, "E=enabled, H=hw, C=config (level=1, edge=0)\n");
+	seq_printf(s, "G=group\n");
 }
 
 static void print_header(struct seq_file *s, struct vgic_irq *irq,
@@ -180,8 +181,8 @@  static void print_header(struct seq_file *s, struct vgic_irq *irq,
 	}
 
 	seq_printf(s, "\n");
-	seq_printf(s, "%s%2d TYP   ID TGT_ID PLAEHC     HWID   TARGET SRC PRI VCPU_ID\n", hdr, id);
-	seq_printf(s, "---------------------------------------------------------------\n");
+	seq_printf(s, "%s%2d TYP   ID TGT_ID PLAEHCG     HWID   TARGET SRC PRI VCPU_ID\n", hdr, id);
+	seq_printf(s, "----------------------------------------------------------------\n");
 }
 
 static void print_irq_state(struct seq_file *s, struct vgic_irq *irq,
@@ -202,7 +203,7 @@  static void print_irq_state(struct seq_file *s, struct vgic_irq *irq,
 
 	seq_printf(s, "       %s %4d "
 		      "    %2d "
-		      "%d%d%d%d%d%d "
+		      "%d%d%d%d%d%d%d "
 		      "%8d "
 		      "%8x "
 		      " %2x "
@@ -217,6 +218,7 @@  static void print_irq_state(struct seq_file *s, struct vgic_irq *irq,
 			irq->enabled,
 			irq->hw,
 			irq->config == VGIC_CONFIG_LEVEL,
+			irq->group,
 			irq->hwintid,
 			irq->mpidr,
 			irq->source,
diff --git a/virt/kvm/arm/vgic/vgic-init.c b/virt/kvm/arm/vgic/vgic-init.c
index 230c9221fe70..a7c19cda5835 100644
--- a/virt/kvm/arm/vgic/vgic-init.c
+++ b/virt/kvm/arm/vgic/vgic-init.c
@@ -175,10 +175,13 @@  static int kvm_vgic_dist_init(struct kvm *kvm, unsigned int nr_spis)
 		irq->vcpu = NULL;
 		irq->target_vcpu = vcpu0;
 		kref_init(&irq->refcount);
-		if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2)
+		if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2) {
 			irq->targets = 0;
-		else
+			irq->group = 0;
+		} else {
 			irq->mpidr = 0;
+			irq->group = 1;
+		}
 	}
 	return 0;
 }
@@ -227,6 +230,18 @@  int kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu)
 			/* PPIs */
 			irq->config = VGIC_CONFIG_LEVEL;
 		}
+
+		/*
+		 * GICv3 can only be created via the KVM_DEVICE_CREATE API and
+		 * so we always know the emulation type at this point as it's
+		 * either explicitly configured as GICv3, or explicitly
+		 * configured as GICv2, or not configured yet which also
+		 * implies GICv2.
+		 */
+		if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3)
+			irq->group = 1;
+		else
+			irq->group = 0;
 	}
 
 	if (!irqchip_in_kernel(vcpu->kvm))
diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c
index cee2c3c5519c..12502251727e 100644
--- a/virt/kvm/arm/vgic/vgic-its.c
+++ b/virt/kvm/arm/vgic/vgic-its.c
@@ -71,6 +71,7 @@  static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid,
 	kref_init(&irq->refcount);
 	irq->intid = intid;
 	irq->target_vcpu = vcpu;
+	irq->group = 1;
 
 	spin_lock_irqsave(&dist->lpi_list_lock, flags);