@@ -16,48 +16,6 @@
compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
- ahb {
- apb {
- pinctrl@fffff200 {
- nattis {
- pinctrl_usba_vbus: usba_vbus {
- atmel,pins =
- <AT91_PIOD 28
- AT91_PERIPH_GPIO
- AT91_PINCTRL_DEGLITCH>;
- };
-
- pinctrl_mmc0_cd: mmc0_cd {
- atmel,pins =
- <AT91_PIOD 5
- AT91_PERIPH_GPIO
- AT91_PINCTRL_PULL_UP_DEGLITCH>;
- };
-
- pinctrl_lvds_prlud0: lvds_prlud0 {
- atmel,pins =
- <AT91_PIOA 21
- AT91_PERIPH_GPIO
- (AT91_PINCTRL_OUTPUT |
- AT91_PINCTRL_OUTPUT_VAL(0))>;
- };
-
- pinctrl_lvds_hipow0: lvds_hipow0 {
- atmel,pins =
- <AT91_PIOA 23
- AT91_PERIPH_GPIO
- (AT91_PINCTRL_OUTPUT |
- AT91_PINCTRL_OUTPUT_VAL(0))>;
- };
- };
- };
-
- watchdog@fffffe40 {
- status = "okay";
- };
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
@@ -183,6 +141,36 @@
};
};
+&pinctrl {
+ nattis {
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO
+ AT91_PINCTRL_DEGLITCH>;
+ };
+
+ pinctrl_mmc0_cd: mmc0_cd {
+ atmel,pins = <AT91_PIOD 5 AT91_PERIPH_GPIO
+ AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_lvds_prlud0: lvds_prlud0 {
+ atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO
+ (AT91_PINCTRL_OUTPUT |
+ AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+
+ pinctrl_lvds_hipow0: lvds_hipow0 {
+ atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO
+ (AT91_PINCTRL_OUTPUT |
+ AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+ };
+};
+
+&watchdog {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
Make use of the recently added &pinctrl and &watchdog labels. This makes the whole file consistent and knowledge of the ahb/apb structure is hidden. Signed-off-by: Peter Rosin <peda@axentia.se> --- arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 72 ++++++++++++----------------- 1 file changed, 30 insertions(+), 42 deletions(-)