[1/4] ARM: dts: meson8b: odroidc1: add the CPU voltage regulator

Commit Message

Martin Blumenstingl Sept. 13, 2018, 8:29 p.m. UTC

The CPU voltage regulator is a "Monolithic Power Systems MP2161"
(according to the Odroid-C1+'s schematics). It is driven by PWM_C on
GPIODV_9.

Hardkernel's 3.10 kernel (based on the Amlogic GPL kernel sources)
defines a PWM voltage table with the following values:
- 0.86 volts = PWM register value 0x10f001b
- (more values in 0.1 volt increments)
- 1.14 volts = PWM register value 0x000012a
When using the XTAL (24MHz) as input this translates into a PWM period
of 12218ns with 0.86V using a duty cycle of 91% and 1.14V using a duty
cycle of 0%.

Signed-off-by: Martin Blumenstingl <[e-mail]>
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 27 ++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

Patch

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index ef3177d3da3d..0557823cdd64 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -101,6 +101,25 @@ 
 		states = <3300000 0
 			  1800000 1>;
 	};
+
+	vcck: regulator-vcck {
+		/* Monolithic Power Systems MP2161 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwms = <&pwm_cd 0 12218 0>;
+		pwm-dutycycle-range = <91 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
 };
 
 &ethmac {
@@ -180,6 +199,14 @@ 
 	};
 };
 
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_c1_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_XTAL>;
+	clock-names = "clkin0";
+};
+
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;