| Message ID | 20181001072003.16238-3-shawnguo@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [GIT,PULL,1/5] i.MX drivers updates for 4.20 | expand |
On Mon, Oct 1, 2018 at 9:20 AM Shawn Guo <shawnguo@kernel.org> wrote: > > ---------------------------------------------------------------- > i.MX device tree update for 4.20: > - New board support: Engicam's i.Core MX6 CPU module v1.5; ConnectCore > 6UL Single Board Computer (SBC) Pro; i.MX6 ULZ based EVK board. > - Add Add SFF interface support for vf610-zii board. > - Disable unneeded devices like VPU and internal watchdog for imx51-zii > boards. > - Add 'no-sdio' and 'no-sd' property for vf610-zii-cfu1 board. > - Improve i.MX6 SLL GPIO support by adding gpio-ranges property and > clocks information. > - Update iomux header for i.MX7 Solo and i.MX6 ULL. > - Enable GPIO buttons as wakeup source for imx7d-sdb and imx6sx-sdb. > - Add GPIO keys and egalax touch screen support for imx6qdl-sabreauto. > - Switch to use SPDX-License-Identifier for more boards - vf610-twr, > imx7s-warp, Engicam boards. > - Add device tree bindings of 'fsl,pmic-stby-poweroff' property and add > the support for i.MX6 RIoTboard. > - DTC has new checks for SPI buses which will be landed on 4.20. > A patch from Rob to fix those 100+ warnings on i.MX boards. (Thanks!) > - Switch i.MX7 device tree to use updated coresight binding for > hardware ports. > - Misc small or random update and cleanup. Pulled into next/dt, thanks! Arnd
The following changes since commit 57361846b52bc686112da6ca5368d11210796804: Linux 4.19-rc2 (2018-09-02 14:37:30 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-4.20 for you to fetch changes up to 04007fe4c65f4cf3133dd256d9fd82169b7f2f22: ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support (2018-09-30 15:32:18 +0800) ---------------------------------------------------------------- i.MX device tree update for 4.20: - New board support: Engicam's i.Core MX6 CPU module v1.5; ConnectCore 6UL Single Board Computer (SBC) Pro; i.MX6 ULZ based EVK board. - Add Add SFF interface support for vf610-zii board. - Disable unneeded devices like VPU and internal watchdog for imx51-zii boards. - Add 'no-sdio' and 'no-sd' property for vf610-zii-cfu1 board. - Improve i.MX6 SLL GPIO support by adding gpio-ranges property and clocks information. - Update iomux header for i.MX7 Solo and i.MX6 ULL. - Enable GPIO buttons as wakeup source for imx7d-sdb and imx6sx-sdb. - Add GPIO keys and egalax touch screen support for imx6qdl-sabreauto. - Switch to use SPDX-License-Identifier for more boards - vf610-twr, imx7s-warp, Engicam boards. - Add device tree bindings of 'fsl,pmic-stby-poweroff' property and add the support for i.MX6 RIoTboard. - DTC has new checks for SPI buses which will be landed on 4.20. A patch from Rob to fix those 100+ warnings on i.MX boards. (Thanks!) - Switch i.MX7 device tree to use updated coresight binding for hardware ports. - Misc small or random update and cleanup. ---------------------------------------------------------------- Alex Gonzalez (1): ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro Andrew Lunn (1): ARM: dts: vf610-zii-cfu1: Add SFF interface to switch Anson Huang (16): ARM: dts: imx6sll: add gpio-ranges property ARM: dts: imx7ulp: update pinfunc header file ARM: dts: imx7s: remove snvs_poweroff node ARM: dts: imx6sll: add gpio clocks ARM: dts: imx6ull-14x14-evk: correct machine model name dt-bindings: arm: add missing compatible for i.MX boards ARM: dts: imx7d-sdb: enable gpio buttons as wakeup source ARM: dts: imx6sx-sdb: enable gpio buttons as wakeup source ARM: dts: imx7s: enable cpuidle driver ARM: dts: imx6ull: update iomux header ARM: dts: imx6qdl-sabreauto: add gpio keys support ARM: dts: imx6qdl-sabreauto: add egalax touch screen support ARM: dts: imx6ull: update vdd_soc voltage for 900MHz operating point ARM: dts: imx6ul: use nvmem-cells for cpu speed grading dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support Esben Haabendal (1): ARM: dts: ls1021a: Enable I2C DMA support Fabio Estevam (13): ARM: dts: imx51-babbage: Add MC13892 ADC support ARM: dts: imx6ul: Enable the PMU node ARM: dts: imx51: Add label for VPU node ARM: dts: imx51-zii-scu3-esb: Disable VPU ARM: dts: imx51-zii-scu2-mezz: Disable VPU ARM: dts: imx51-zii-scu2-mezz: Disable the internal watchdog ARM: dts: vf610-zii-cfu1: Pass the 'no-sdio' property ARM: dts: vf610-zii-cfu1: Pass the 'no-sd' property ARM: dts: imx51-zii-rdu1: Fix the rtc compatible string ARM: dts: imx6qdl-zii-rdu2: Disable the internal RTC ARM: dts: vf: Switch to SPDX identifier ARM: dts: vf610-twr: Switch to SPDX identifier ARM: dts: imx53-ppd: Remove 'num-chipselects' property Jacopo Mondi (2): ARM: dts: imx6qdl: Add Engicam i.Core 1.5 MX6 ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6 Jagan Teki (3): ARM: dts: imx: Switch Engicam boards to use SPDX identifier ARM: dts: imx6ul-isiot: Move node definitions into dtsi ARM: dts: i.MX6: Use consistent node names for Engicam files Oleksij Rempel (3): ARM: dts: imx7s: add i.MX7 messaging unit support dt-bindings: imx6q-clock: add new fsl,pmic-stby-poweroff property ARM: dts: imx6: RIoTboard provide standby on power off option Pierre-Jean Texier (2): ARM: dts: imx7s-warp: enable i2c3 device support ARM: dts: imx7s-warp: use SPDX-License-Identifier Prabhakar Kushwaha (1): ARM: dts: Add big-endian in nor node for ls1021a Rob Herring (1): ARM: dts: imx: Fix SPI bus warnings Russell King (1): ARM: dts: vf610-zii-dev-rev-c: add support for one SFF module Stefan Agner (1): ARM: dts: imx6q-apalis: mux RESET_MOCI# signal Suzuki K Poulose (1): ARM: dts: imx7: Update coresight binding for hardware ports Sébastien Szymanski (2): ARM: dts: imx6ull: keep IMX6UL_ prefix for signals on both i.MX6UL and i.MX6ULL ARM: dts: imx6ul: Add weim node Tuomas Tynkkynen (1): ARM: dts: imx6qdl-wandboard: Add stdout-path Documentation/devicetree/bindings/arm/fsl.txt | 44 +++ .../devicetree/bindings/clock/imx6q-clock.txt | 8 + arch/arm/boot/dts/Makefile | 4 +- arch/arm/boot/dts/imx1.dtsi | 4 +- arch/arm/boot/dts/imx23-evk.dts | 2 +- arch/arm/boot/dts/imx23-olinuxino.dts | 4 +- arch/arm/boot/dts/imx23-sansa.dts | 4 +- arch/arm/boot/dts/imx23-stmp378x_devb.dts | 2 +- arch/arm/boot/dts/imx23-xfi3.dts | 4 +- arch/arm/boot/dts/imx23.dtsi | 4 +- arch/arm/boot/dts/imx25.dtsi | 6 +- arch/arm/boot/dts/imx27.dtsi | 6 +- arch/arm/boot/dts/imx28-apf28dev.dts | 4 +- arch/arm/boot/dts/imx28-apx4devkit.dts | 4 +- arch/arm/boot/dts/imx28-cfa10036.dts | 2 +- arch/arm/boot/dts/imx28-duckbill-2-485.dts | 4 +- arch/arm/boot/dts/imx28-duckbill-2-enocean.dts | 4 +- arch/arm/boot/dts/imx28-duckbill-2-spi.dts | 4 +- arch/arm/boot/dts/imx28-duckbill-2.dts | 4 +- arch/arm/boot/dts/imx28-duckbill.dts | 4 +- arch/arm/boot/dts/imx28-evk.dts | 6 +- arch/arm/boot/dts/imx28-m28cu3.dts | 4 +- arch/arm/boot/dts/imx28-m28evk.dts | 4 +- arch/arm/boot/dts/imx28-sps1.dts | 4 +- arch/arm/boot/dts/imx28-ts4600.dts | 2 +- arch/arm/boot/dts/imx28.dtsi | 8 +- arch/arm/boot/dts/imx31.dtsi | 4 +- arch/arm/boot/dts/imx35.dtsi | 4 +- arch/arm/boot/dts/imx50.dtsi | 6 +- arch/arm/boot/dts/imx51-babbage.dts | 1 + arch/arm/boot/dts/imx51-zii-rdu1.dts | 2 +- arch/arm/boot/dts/imx51-zii-scu2-mezz.dts | 8 + arch/arm/boot/dts/imx51-zii-scu3-esb.dts | 4 + arch/arm/boot/dts/imx51.dtsi | 8 +- arch/arm/boot/dts/imx53-ppd.dts | 1 - arch/arm/boot/dts/imx53.dtsi | 6 +- arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 2 +- arch/arm/boot/dts/imx6dl-icore-mipi.dts | 2 +- arch/arm/boot/dts/imx6dl-icore-rqs.dts | 38 +- arch/arm/boot/dts/imx6dl-icore.dts | 38 +- arch/arm/boot/dts/imx6dl-riotboard.dts | 5 + arch/arm/boot/dts/imx6q-apalis-eval.dts | 2 + arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts | 2 + arch/arm/boot/dts/imx6q-apalis-ixora.dts | 2 + arch/arm/boot/dts/imx6q-icore-mipi.dts | 6 +- arch/arm/boot/dts/imx6q-icore-ofcap10.dts | 38 +- arch/arm/boot/dts/imx6q-icore-ofcap12.dts | 38 +- arch/arm/boot/dts/imx6q-icore-rqs.dts | 39 +-- arch/arm/boot/dts/imx6q-icore.dts | 38 +- arch/arm/boot/dts/imx6q.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-apalis.dtsi | 4 - arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi | 34 ++ arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 41 +-- arch/arm/boot/dts/imx6qdl-icore.dtsi | 42 +-- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 67 ++++ arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 4 + arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 4 + arch/arm/boot/dts/imx6qdl.dtsi | 8 +- arch/arm/boot/dts/imx6sl.dtsi | 8 +- arch/arm/boot/dts/imx6sll.dtsi | 31 ++ arch/arm/boot/dts/imx6sx-sdb.dtsi | 2 + arch/arm/boot/dts/imx6sx.dtsi | 14 +- arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 390 +++++++++++++++++++++ arch/arm/boot/dts/imx6ul-geam.dts | 40 +-- arch/arm/boot/dts/imx6ul-isiot-emmc.dts | 61 +--- arch/arm/boot/dts/imx6ul-isiot-nand.dts | 63 +--- arch/arm/boot/dts/imx6ul-isiot.dtsi | 90 +++-- arch/arm/boot/dts/imx6ul.dtsi | 28 +- arch/arm/boot/dts/imx6ull-14x14-evk.dts | 2 +- arch/arm/boot/dts/imx6ull-pinfunc.h | 39 ++- arch/arm/boot/dts/imx6ull.dtsi | 2 +- arch/arm/boot/dts/imx6ulz-14x14-evk.dts | 20 ++ arch/arm/boot/dts/imx6ulz.dtsi | 38 ++ arch/arm/boot/dts/imx7d-sdb.dts | 2 + arch/arm/boot/dts/imx7d.dtsi | 15 +- arch/arm/boot/dts/imx7s-warp.dts | 53 +-- arch/arm/boot/dts/imx7s.dtsi | 131 ++++--- arch/arm/boot/dts/imx7ulp-pinfunc.h | 16 +- arch/arm/boot/dts/ls1021a-qds.dts | 2 + arch/arm/boot/dts/ls1021a-twr.dts | 2 + arch/arm/boot/dts/ls1021a.dtsi | 12 +- arch/arm/boot/dts/vf500.dtsi | 43 +-- arch/arm/boot/dts/vf610-twr.dts | 43 +-- arch/arm/boot/dts/vf610-zii-cfu1.dts | 30 ++ arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 44 ++- arch/arm/boot/dts/vf610.dtsi | 44 +-- arch/arm/boot/dts/vfxxx.dtsi | 55 +-- 87 files changed, 1081 insertions(+), 889 deletions(-) create mode 100644 arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi create mode 100644 arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts create mode 100644 arch/arm/boot/dts/imx6ulz-14x14-evk.dts create mode 100644 arch/arm/boot/dts/imx6ulz.dtsi