| Message ID | 20181011094655.45707-7-peng.ma@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/7] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT | expand |
On Thu, Oct 11, 2018 at 05:46:55PM +0800, Peng Ma wrote: > Document the devicetree bindings for NXP Layerscape qDMA controller > which could be found on NXP QorIQ Layerscape SoCs. > > Signed-off-by: Peng Ma <peng.ma@nxp.com> What happened to the version from Wen He that was on v7 and that I already gave my Reviewed-by on? > --- > Documentation/devicetree/bindings/dma/fsl-qdma.txt | 53 ++++++++++++++++++++ > 1 files changed, 53 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/dma/fsl-qdma.txt
Hi Rob, > -----Original Message----- > From: Rob Herring [mailto:robh@kernel.org] > Sent: 2018年10月12日 6:09 > To: Peng Ma <peng.ma@nxp.com> > Cc: vkoul@kernel.org; Leo Li <leoyang.li@nxp.com>; mark.rutland@arm.com; > shawnguo@kernel.org; dan.j.williams@intel.com; zw@zh-kernel.org; > dmaengine@vger.kernel.org; devicetree@vger.kernel.org; > linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > linuxppc-dev@lists.ozlabs.org > Subject: Re: [PATCH 7/7] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA > controller bindings > > On Thu, Oct 11, 2018 at 05:46:55PM +0800, Peng Ma wrote: > > Document the devicetree bindings for NXP Layerscape qDMA controller > > which could be found on NXP QorIQ Layerscape SoCs. > > > > Signed-off-by: Peng Ma <peng.ma@nxp.com> > > What happened to the version from Wen He that was on v7 and that I already > gave my Reviewed-by on? [Peng Ma] the dma owner is changed and qdma driver made some changes, so I need send those patch again to review! Best regards Peng Ma > > > --- > > Documentation/devicetree/bindings/dma/fsl-qdma.txt | 53 > ++++++++++++++++++++ > > 1 files changed, 53 insertions(+), 0 deletions(-) create mode 100644 > > Documentation/devicetree/bindings/dma/fsl-qdma.txt
On Fri, Oct 12, 2018 at 02:25:25AM +0000, Peng Ma wrote: > Hi Rob, > > > -----Original Message----- > > From: Rob Herring [mailto:robh@kernel.org] > > Sent: 2018年10月12日 6:09 > > To: Peng Ma <peng.ma@nxp.com> > > Cc: vkoul@kernel.org; Leo Li <leoyang.li@nxp.com>; mark.rutland@arm.com; > > shawnguo@kernel.org; dan.j.williams@intel.com; zw@zh-kernel.org; > > dmaengine@vger.kernel.org; devicetree@vger.kernel.org; > > linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > > linuxppc-dev@lists.ozlabs.org > > Subject: Re: [PATCH 7/7] dt-bindings: fsl-qdma: Add NXP Layerscpae qDMA > > controller bindings > > > > On Thu, Oct 11, 2018 at 05:46:55PM +0800, Peng Ma wrote: > > > Document the devicetree bindings for NXP Layerscape qDMA controller > > > which could be found on NXP QorIQ Layerscape SoCs. > > > > > > Signed-off-by: Peng Ma <peng.ma@nxp.com> > > > > What happened to the version from Wen He that was on v7 and that I already > > gave my Reviewed-by on? > > [Peng Ma] the dma owner is changed and qdma driver made some changes, so I need send those patch again to review! That's no reason to make changes or drop the original author. You should also indicate this is v9 and provide revision history. Rob
diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt new file mode 100644 index 0000000..7e2160b --- /dev/null +++ b/Documentation/devicetree/bindings/dma/fsl-qdma.txt @@ -0,0 +1,53 @@ +NXP Layerscape SoC qDMA Controller +================================== + +The qDMA supports channel virtualization by allowing DMA jobs to be enqueued into +different command queues. Core can initiate a DMA transaction by preparing a command +descriptor for each DMA job and enqueuing this job to a command queue. + +Required properties: +- compatible: Must be one of + "fsl,ls1021a-qdma": for LS1021A Board + "fsl,ls1043a-qdma": for ls1043A Board + "fsl,ls1046a-qdma": for ls1046A Board +- reg : Specifies base physical address(s) and size of the qDMA registers. + The 1st region is qDMA control register's address and size. + The 2nd region is status queue control register's address and size. + The 3rd region is virtual block control register's address and size. +- interrupts : A list of interrupt-specifiers, one for each entry in + interrupt-names. +- interrupt-names : Should contain: + "qdma-queue0" - the block0 interrupt + "qdma-queue1" - the block1 interrupt + "qdma-queue2" - the block2 interrupt + "qdma-queue3" - the block3 interrupt + "qdma-error" - the error interrupt +- channels : Number of DMA channels supported +- block-number : the virtual block number +- block-offset : the offset of different virtual block +- queues : the number of command queue per virtual block +- status-sizes : status queue size of per virtual block +- queue-sizes : command queue size of per virtual block, the size number based on queues +- big-endian: If present registers and hardware scatter/gather descriptors + of the qDMA are implemented in big endian mode, otherwise in little + mode. + +Examples: + qdma: qdma@8390000 { + compatible = "fsl,ls1021a-qdma"; + reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8389000 0x0 0x1000>, /* Status regs */ + <0x0 0x838a000 0x0 0x2000>; /* Block regs */ + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", + "qdma-queue0", "qdma-queue1"; + channels = <8>; + block-number = <2>; + block-offset = <0x1000>; + queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; + };
Document the devicetree bindings for NXP Layerscape qDMA controller which could be found on NXP QorIQ Layerscape SoCs. Signed-off-by: Peng Ma <peng.ma@nxp.com> --- Documentation/devicetree/bindings/dma/fsl-qdma.txt | 53 ++++++++++++++++++++ 1 files changed, 53 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/dma/fsl-qdma.txt