diff mbox series

[v11,4/7] arm: dts: ls1021a: add qdma device tree nodes

Message ID 20181030023604.34027-4-peng.ma@nxp.com (mailing list archive)
State New, archived
Headers show
Series [v11,1/7] dmaengine: fsldma: Replace DMA_IN/OUT by FSL_DMA_IN/OUT | expand

Commit Message

Peng Ma Oct. 30, 2018, 2:36 a.m. UTC 
add the qDMA device tree nodes for LS1021A devices.

Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Peng Ma <peng.ma@nxp.com>
---
change in v11:
	- no

 arch/arm/boot/dts/ls1021a.dtsi |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)

Comments

Shawn Guo Dec. 6, 2018, 1:02 a.m. UTC | #1 
On Tue, Oct 30, 2018 at 10:36:01AM +0800, Peng Ma wrote:
> add the qDMA device tree nodes for LS1021A devices.
> 
> Signed-off-by: Wen He <wen.he_1@nxp.com>
> Signed-off-by: Peng Ma <peng.ma@nxp.com>

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index f184905..c0ed6be 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -806,5 +806,25 @@ 
 			#size-cells = <1>;
 			ranges = <0x0 0x0 0x10010000 0x10000>;
 		};
+
+		qdma: dma-controller@8390000 {
+			compatible = "fsl,ls1021a-qdma";
+			reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8389000 0x0 0x1000>, /* Status regs */
+			      <0x0 0x838a000 0x0 0x2000>; /* Block regs */
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error",
+				"qdma-queue0", "qdma-queue1";
+			dma-channels = <8>;
+			block-number = <1>;
+			block-offset = <0x1000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+			big-endian;
+		};
+
 	};
 };