@@ -14,6 +14,122 @@
*/
#define I2C_ADDR 0x69
+static const struct dw_hdmi_mpll_config sun50i_h6_mpll_cfg[] = {
+ {
+ 30666000, {
+ { 0x00b3, 0x0000 },
+ { 0x2153, 0x0000 },
+ { 0x40f3, 0x0000 },
+ },
+ }, {
+ 36800000, {
+ { 0x00b3, 0x0000 },
+ { 0x2153, 0x0000 },
+ { 0x40a2, 0x0001 },
+ },
+ }, {
+ 46000000, {
+ { 0x00b3, 0x0000 },
+ { 0x2142, 0x0001 },
+ { 0x40a2, 0x0001 },
+ },
+ }, {
+ 61333000, {
+ { 0x0072, 0x0001 },
+ { 0x2142, 0x0001 },
+ { 0x40a2, 0x0001 },
+ },
+ }, {
+ 73600000, {
+ { 0x0072, 0x0001 },
+ { 0x2142, 0x0001 },
+ { 0x4061, 0x0002 },
+ },
+ }, {
+ 92000000, {
+ { 0x0072, 0x0001 },
+ { 0x2145, 0x0002 },
+ { 0x4061, 0x0002 },
+ },
+ }, {
+ 122666000, {
+ { 0x0051, 0x0002 },
+ { 0x2145, 0x0002 },
+ { 0x4061, 0x0002 },
+ },
+ }, {
+ 147200000, {
+ { 0x0051, 0x0002 },
+ { 0x2145, 0x0002 },
+ { 0x4064, 0x0003 },
+ },
+ }, {
+ 184000000, {
+ { 0x0051, 0x0002 },
+ { 0x214c, 0x0003 },
+ { 0x4064, 0x0003 },
+ },
+ }, {
+ 226666000, {
+ { 0x0040, 0x0003 },
+ { 0x214c, 0x0003 },
+ { 0x4064, 0x0003 },
+ },
+ }, {
+ 272000000, {
+ { 0x0040, 0x0003 },
+ { 0x214c, 0x0003 },
+ { 0x5a64, 0x0003 },
+ },
+ }, {
+ 340000000, {
+ { 0x0040, 0x0003 },
+ { 0x3b4c, 0x0003 },
+ { 0x5a64, 0x0003 },
+ },
+ }, {
+ 594000000, {
+ { 0x1a40, 0x0003 },
+ { 0x3b4c, 0x0003 },
+ { 0x5a64, 0x0003 },
+ },
+ }, {
+ ~0UL, {
+ { 0x0000, 0x0000 },
+ { 0x0000, 0x0000 },
+ { 0x0000, 0x0000 },
+ },
+ }
+};
+
+static const struct dw_hdmi_curr_ctrl sun50i_h6_cur_ctr[] = {
+ /* pixelclk bpp8 bpp10 bpp12 */
+ { 25175000, { 0x0000, 0x0000, 0x0000 }, },
+ { 27000000, { 0x0012, 0x0000, 0x0000 }, },
+ { 59400000, { 0x0008, 0x0008, 0x0008 }, },
+ { 72000000, { 0x0008, 0x0008, 0x001b }, },
+ { 74250000, { 0x0013, 0x0013, 0x0013 }, },
+ { 90000000, { 0x0008, 0x001a, 0x001b }, },
+ { 118800000, { 0x001b, 0x001a, 0x001b }, },
+ { 144000000, { 0x001b, 0x001a, 0x0034 }, },
+ { 180000000, { 0x001b, 0x0033, 0x0034 }, },
+ { 216000000, { 0x0036, 0x0033, 0x0034 }, },
+ { 237600000, { 0x0036, 0x0033, 0x001b }, },
+ { 288000000, { 0x0036, 0x001b, 0x001b }, },
+ { 297000000, { 0x0019, 0x001b, 0x0019 }, },
+ { 330000000, { 0x0036, 0x001b, 0x001b }, },
+ { 594000000, { 0x003f, 0x001b, 0x001b }, },
+ { ~0UL, { 0x0000, 0x0000, 0x0000 }, }
+};
+
+static const struct dw_hdmi_phy_config sun50i_h6_phy_config[] = {
+ /*pixelclk symbol term vlev*/
+ { 74250000, 0x8009, 0x0004, 0x0232},
+ { 148500000, 0x8029, 0x0004, 0x0273},
+ { 594000000, 0x8039, 0x0004, 0x014a},
+ { ~0UL, 0x0000, 0x0000, 0x0000}
+};
+
static int sun8i_hdmi_phy_config_a83t(struct dw_hdmi *hdmi,
struct sun8i_hdmi_phy *phy,
unsigned int clk_rate)
@@ -290,6 +406,16 @@ static void sun8i_hdmi_phy_unlock(struct sun8i_hdmi_phy *phy)
SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC);
}
+static void sun50i_hdmi_phy_init_h6(struct sun8i_hdmi_phy *phy)
+{
+ regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_REXT_CTRL_REG,
+ SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN,
+ SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN);
+
+ regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_REXT_CTRL_REG,
+ 0xffff0000, 0x80c00000);
+}
+
static void sun8i_hdmi_phy_init_a83t(struct sun8i_hdmi_phy *phy)
{
sun8i_hdmi_phy_unlock(phy);
@@ -446,6 +572,13 @@ static const struct sun8i_hdmi_phy_variant sun50i_a64_hdmi_phy = {
.phy_config = &sun8i_hdmi_phy_config_h3,
};
+static const struct sun8i_hdmi_phy_variant sun50i_h6_hdmi_phy = {
+ .cur_ctr = sun50i_h6_cur_ctr,
+ .mpll_cfg = sun50i_h6_mpll_cfg,
+ .phy_cfg = sun50i_h6_phy_config,
+ .phy_init = &sun50i_hdmi_phy_init_h6,
+};
+
static const struct of_device_id sun8i_hdmi_phy_of_table[] = {
{
.compatible = "allwinner,sun8i-a83t-hdmi-phy",
@@ -463,6 +596,10 @@ static const struct of_device_id sun8i_hdmi_phy_of_table[] = {
.compatible = "allwinner,sun50i-a64-hdmi-phy",
.data = &sun50i_a64_hdmi_phy,
},
+ {
+ .compatible = "allwinner,sun50i-h6-hdmi-phy",
+ .data = &sun50i_h6_hdmi_phy,
+ },
{ /* sentinel */ }
};
H6 has Synopsys DWC HDMI 2.0 TX PHY. There is no freely available documentation for it, only code found in BSP kernel. However, judging by the code, PHY is very similar to older Synopsys HDMI PHY described in i.MX6 documentation. Most registers seem to be the same. According to i.MX6 documentation, mpll settings are based on pixel clock and are not specific to each SoC. Because of that, mpll table in this commit is based on that documentation and not on BSP code. Other PHY settings were derived from BSP PHY driver code. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> --- drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 137 +++++++++++++++++++++++++ 1 file changed, 137 insertions(+)