| Message ID | 20181108112647.7205-3-vigneshr@ti.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | AM654: Add pinmux support | expand |
On 16:56-20181108, Vignesh R wrote: > diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi > index 3d4bf369d030..873dca1d0813 100644 > --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi > @@ -8,6 +8,7 @@ > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/pinctrl/k3-am65.h> > > / { > model = "Texas Instruments K3 AM654 SoC"; > -- > 2.19.1 > Where is this used? Could we mux the uart console that we are using? will be good to see an example of usage.
* Nishanth Menon <nm@ti.com> [181108 13:48]: > On 16:56-20181108, Vignesh R wrote: > > diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi > > index 3d4bf369d030..873dca1d0813 100644 > > --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi > > +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi > > @@ -8,6 +8,7 @@ > > #include <dt-bindings/gpio/gpio.h> > > #include <dt-bindings/interrupt-controller/irq.h> > > #include <dt-bindings/interrupt-controller/arm-gic.h> > > +#include <dt-bindings/pinctrl/k3-am65.h> > > > > / { > > model = "Texas Instruments K3 AM654 SoC"; > > -- > > 2.19.1 > > > > Where is this used? Could we mux the uart console that we are using? > will be good to see an example of usage. Yes please. And please add the SoC specific macro for the pins in a format that makes the pinconf and pinmux options separate parameters for the macro where the usage becomes something like: AM65X_IOPAD(0x1234, PIN_INPUT_PULLUP, 0) The above 0 is just the mux mode number in the example. So no more need to use MUX_MODE0 define to redefine a number when set up that way :) This will allow us to eventually take advantage of the #pinctrl-cells = <2> and not have to change all the dts files and just change the macro. I also added Linus Walleij to Cc as this might interest him also. Regards, Tony
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index adcd6341e40c..f7c2a60d5c80 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -69,4 +69,20 @@ clock-frequency = <48000000>; current-speed = <115200>; }; + + main_pmx0: pinmux@11c000 { + compatible = "pinctrl-single"; + reg = <0x0 0x11c000 0x0 0x2e4>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_pmx1: pinmux@11c2e8 { + compatible = "pinctrl-single"; + reg = <0x0 0x11c2e8 0x0 0x24>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index 8d7b47f9dfbf..19b46f40789b 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -34,6 +34,14 @@ }; }; + wkup_pmx0: pinmux@4301c000 { + compatible = "pinctrl-single"; + reg = <0x4301c000 0x118>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + wkup_uart0: serial@42300000 { compatible = "ti,am654-uart"; reg = <0x42300000 0x100>; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index 3d4bf369d030..873dca1d0813 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/k3-am65.h> / { model = "Texas Instruments K3 AM654 SoC";