| Message ID | 20181113120054.17639-2-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/2] dt-bindings: gpu: mali-utgard: Add compatible for A64 Mali | expand |
On Tue, Nov 13, 2018 at 05:30:54PM +0530, Jagan Teki wrote: > Add support for Allwinner A64 has Mali-400MP2. > > All interrupt lines are mentioned in the manual so used the same. > Used 408MHz as assigned clock rate used by BSP, so used the same as > well. You're not using that frequency anywhere. Maxime
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index d6f269883759..d507be9879d8 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -813,6 +813,28 @@ }; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun50i-a64-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>,
Add support for Allwinner A64 has Mali-400MP2. All interrupt lines are mentioned in the manual so used the same. Used 408MHz as assigned clock rate used by BSP, so used the same as well. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v2: - Drop assigned clock properties - Separate dt-bindings as separate patch. arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 22 +++++++++++++++++++ 1 file changed, 22 insertions(+)