diff mbox series

[v2,4/4] ARM: dts: Add stmpe-adc driver to relevant devicetrees

Message ID 20181119102528.2830-4-dev@pschenker.ch (mailing list archive)
State New, archived
Headers show
Series [v2,1/4] mfd: stmpe: Move ADC related defines to header of mfd | expand

Commit Message

Philippe Schenker Nov. 19, 2018, 10:25 a.m. UTC
From: Philippe Schenker <philippe.schenker@toradex.com>

Activate the stmpe-adc driver as found on Apalis/Colibri iMX6/T30 modules

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

Changes in v2:
 - Put common ADC settings in mfd

 arch/arm/boot/dts/imx6qdl-apalis.dtsi  | 22 ++++++++++++++--------
 arch/arm/boot/dts/imx6qdl-colibri.dtsi | 23 +++++++++++++++--------
 arch/arm/boot/dts/tegra30-apalis.dtsi  | 22 ++++++++++++++--------
 arch/arm/boot/dts/tegra30-colibri.dtsi | 22 ++++++++++++++--------
 4 files changed, 57 insertions(+), 32 deletions(-)

Comments

Shawn Guo Nov. 28, 2018, 3 a.m. UTC | #1
On Mon, Nov 19, 2018 at 11:25:28AM +0100, Philippe Schenker wrote:
> From: Philippe Schenker <philippe.schenker@toradex.com>
> 
> Activate the stmpe-adc driver as found on Apalis/Colibri iMX6/T30 modules

iMX6 and T30 changes need to be separate patches.

Shawn

> 
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> ---
> 
> Changes in v2:
>  - Put common ADC settings in mfd
> 
>  arch/arm/boot/dts/imx6qdl-apalis.dtsi  | 22 ++++++++++++++--------
>  arch/arm/boot/dts/imx6qdl-colibri.dtsi | 23 +++++++++++++++--------
>  arch/arm/boot/dts/tegra30-apalis.dtsi  | 22 ++++++++++++++--------
>  arch/arm/boot/dts/tegra30-colibri.dtsi | 22 ++++++++++++++--------
>  4 files changed, 57 insertions(+), 32 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> index 3dc99dd8dde1..8db476d8978d 100644
> --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> @@ -331,11 +331,18 @@
>  		id = <0>;
>  		blocks = <0x5>;
>  		irq-trigger = <0x1>;
> +		/* 3.25 MHz ADC clock speed */
> +		st,adc-freq = <1>;
> +		/* 12-bit ADC */
> +		st,mod-12b = <1>;
> +		/* internal ADC reference */
> +		st,ref-sel = <0>;
> +		/* ADC converstion time: 80 clocks */
> +		st,sample-time = <4>;
> +		/* forbid to use ADC channels 3-0 (touch) */
>  
>  		stmpe_touchscreen {
>  			compatible = "st,stmpe-ts";
> -			/* 3.25 MHz ADC clock speed */
> -			st,adc-freq = <1>;
>  			/* 8 sample average control */
>  			st,ave-ctrl = <3>;
>  			/* 7 length fractional part in z */
> @@ -345,17 +352,16 @@
>  			 * current limit value
>  			 */
>  			st,i-drive = <1>;
> -			/* 12-bit ADC */
> -			st,mod-12b = <1>;
> -			/* internal ADC reference */
> -			st,ref-sel = <0>;
> -			/* ADC converstion time: 80 clocks */
> -			st,sample-time = <4>;
>  			/* 1 ms panel driver settling time */
>  			st,settling = <3>;
>  			/* 5 ms touch detect interrupt delay */
>  			st,touch-det-delay = <5>;
>  		};
> +
> +		stmpe_adc {
> +			compatible = "st,stmpe-adc";
> +			st,norequest-mask = <0x0F>;
> +		};
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> index 87e15e7cb32b..2e303d79c7f8 100644
> --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> @@ -262,11 +262,18 @@
>  		id = <0>;
>  		blocks = <0x5>;
>  		irq-trigger = <0x1>;
> +		/* 3.25 MHz ADC clock speed */
> +		st,adc-freq = <1>;
> +		/* 12-bit ADC */
> +		st,mod-12b = <1>;
> +		/* internal ADC reference */
> +		st,ref-sel = <0>;
> +		/* ADC converstion time: 80 clocks */
> +		st,sample-time = <4>;
> +		/* forbid to use ADC channels 3-0 (touch) */
>  
>  		stmpe_touchscreen {
>  			compatible = "st,stmpe-ts";
> -			/* 3.25 MHz ADC clock speed */
> -			st,adc-freq = <1>;
>  			/* 8 sample average control */
>  			st,ave-ctrl = <3>;
>  			/* 7 length fractional part in z */
> @@ -276,17 +283,17 @@
>  			 * current limit value
>  			 */
>  			st,i-drive = <1>;
> -			/* 12-bit ADC */
> -			st,mod-12b = <1>;
> -			/* internal ADC reference */
> -			st,ref-sel = <0>;
> -			/* ADC converstion time: 80 clocks */
> -			st,sample-time = <4>;
>  			/* 1 ms panel driver settling time */
>  			st,settling = <3>;
>  			/* 5 ms touch detect interrupt delay */
>  			st,touch-det-delay = <5>;
>  		};
> +
> +		stmpe_adc {
> +			compatible = "st,stmpe-adc";
> +			/* 3.25 MHz ADC clock speed */
> +			st,norequest-mask = <0x0F>;
> +		};
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
> index 7f112f192fe9..850b0d13549a 100644
> --- a/arch/arm/boot/dts/tegra30-apalis.dtsi
> +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
> @@ -976,11 +976,18 @@
>  			id = <0>;
>  			blocks = <0x5>;
>  			irq-trigger = <0x1>;
> +			/* 3.25 MHz ADC clock speed */
> +			st,adc-freq = <1>;
> +			/* 12-bit ADC */
> +			st,mod-12b = <1>;
> +			/* internal ADC reference */
> +			st,ref-sel = <0>;
> +			/* ADC converstion time: 80 clocks */
> +			st,sample-time = <4>;
> +			/* forbid to use ADC channels 3-0 (touch) */
>  
>  			stmpe_touchscreen {
>  				compatible = "st,stmpe-ts";
> -				/* 3.25 MHz ADC clock speed */
> -				st,adc-freq = <1>;
>  				/* 8 sample average control */
>  				st,ave-ctrl = <3>;
>  				/* 7 length fractional part in z */
> @@ -990,17 +997,16 @@
>  				 * current limit value
>  				 */
>  				st,i-drive = <1>;
> -				/* 12-bit ADC */
> -				st,mod-12b = <1>;
> -				/* internal ADC reference */
> -				st,ref-sel = <0>;
> -				/* ADC converstion time: 80 clocks */
> -				st,sample-time = <4>;
>  				/* 1 ms panel driver settling time */
>  				st,settling = <3>;
>  				/* 5 ms touch detect interrupt delay */
>  				st,touch-det-delay = <5>;
>  			};
> +
> +			stmpe_adc {
> +				compatible = "st,stmpe-adc";
> +				st,norequest-mask = <0x0F>;
> +			};
>  		};
>  
>  		/*
> diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
> index 35af03ca9e90..1f9198bb24ff 100644
> --- a/arch/arm/boot/dts/tegra30-colibri.dtsi
> +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
> @@ -845,11 +845,18 @@
>  			id = <0>;
>  			blocks = <0x5>;
>  			irq-trigger = <0x1>;
> +			/* 3.25 MHz ADC clock speed */
> +			st,adc-freq = <1>;
> +			/* 12-bit ADC */
> +			st,mod-12b = <1>;
> +			/* internal ADC reference */
> +			st,ref-sel = <0>;
> +			/* ADC converstion time: 80 clocks */
> +			st,sample-time = <4>;
> +			/* forbid to use ADC channels 3-0 (touch) */
>  
>  			stmpe_touchscreen {
>  				compatible = "st,stmpe-ts";
> -				/* 3.25 MHz ADC clock speed */
> -				st,adc-freq = <1>;
>  				/* 8 sample average control */
>  				st,ave-ctrl = <3>;
>  				/* 7 length fractional part in z */
> @@ -859,17 +866,16 @@
>  				 * current limit value
>  				 */
>  				st,i-drive = <1>;
> -				/* 12-bit ADC */
> -				st,mod-12b = <1>;
> -				/* internal ADC reference */
> -				st,ref-sel = <0>;
> -				/* ADC converstion time: 80 clocks */
> -				st,sample-time = <4>;
>  				/* 1 ms panel driver settling time */
>  				st,settling = <3>;
>  				/* 5 ms touch detect interrupt delay */
>  				st,touch-det-delay = <5>;
>  			};
> +
> +			stmpe_adc {
> +				compatible = "st,stmpe-adc";
> +				st,norequest-mask = <0x0F>;
> +			};
>  		};
>  
>  		/*
> -- 
> 2.19.1
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 3dc99dd8dde1..8db476d8978d 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -331,11 +331,18 @@ 
 		id = <0>;
 		blocks = <0x5>;
 		irq-trigger = <0x1>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+		/* forbid to use ADC channels 3-0 (touch) */
 
 		stmpe_touchscreen {
 			compatible = "st,stmpe-ts";
-			/* 3.25 MHz ADC clock speed */
-			st,adc-freq = <1>;
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
 			/* 7 length fractional part in z */
@@ -345,17 +352,16 @@ 
 			 * current limit value
 			 */
 			st,i-drive = <1>;
-			/* 12-bit ADC */
-			st,mod-12b = <1>;
-			/* internal ADC reference */
-			st,ref-sel = <0>;
-			/* ADC converstion time: 80 clocks */
-			st,sample-time = <4>;
 			/* 1 ms panel driver settling time */
 			st,settling = <3>;
 			/* 5 ms touch detect interrupt delay */
 			st,touch-det-delay = <5>;
 		};
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			st,norequest-mask = <0x0F>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 87e15e7cb32b..2e303d79c7f8 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -262,11 +262,18 @@ 
 		id = <0>;
 		blocks = <0x5>;
 		irq-trigger = <0x1>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+		/* forbid to use ADC channels 3-0 (touch) */
 
 		stmpe_touchscreen {
 			compatible = "st,stmpe-ts";
-			/* 3.25 MHz ADC clock speed */
-			st,adc-freq = <1>;
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
 			/* 7 length fractional part in z */
@@ -276,17 +283,17 @@ 
 			 * current limit value
 			 */
 			st,i-drive = <1>;
-			/* 12-bit ADC */
-			st,mod-12b = <1>;
-			/* internal ADC reference */
-			st,ref-sel = <0>;
-			/* ADC converstion time: 80 clocks */
-			st,sample-time = <4>;
 			/* 1 ms panel driver settling time */
 			st,settling = <3>;
 			/* 5 ms touch detect interrupt delay */
 			st,touch-det-delay = <5>;
 		};
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			/* 3.25 MHz ADC clock speed */
+			st,norequest-mask = <0x0F>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 7f112f192fe9..850b0d13549a 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -976,11 +976,18 @@ 
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+			/* forbid to use ADC channels 3-0 (touch) */
 
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
-				/* 3.25 MHz ADC clock speed */
-				st,adc-freq = <1>;
 				/* 8 sample average control */
 				st,ave-ctrl = <3>;
 				/* 7 length fractional part in z */
@@ -990,17 +997,16 @@ 
 				 * current limit value
 				 */
 				st,i-drive = <1>;
-				/* 12-bit ADC */
-				st,mod-12b = <1>;
-				/* internal ADC reference */
-				st,ref-sel = <0>;
-				/* ADC converstion time: 80 clocks */
-				st,sample-time = <4>;
 				/* 1 ms panel driver settling time */
 				st,settling = <3>;
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
+
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				st,norequest-mask = <0x0F>;
+			};
 		};
 
 		/*
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 35af03ca9e90..1f9198bb24ff 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -845,11 +845,18 @@ 
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+			/* forbid to use ADC channels 3-0 (touch) */
 
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
-				/* 3.25 MHz ADC clock speed */
-				st,adc-freq = <1>;
 				/* 8 sample average control */
 				st,ave-ctrl = <3>;
 				/* 7 length fractional part in z */
@@ -859,17 +866,16 @@ 
 				 * current limit value
 				 */
 				st,i-drive = <1>;
-				/* 12-bit ADC */
-				st,mod-12b = <1>;
-				/* internal ADC reference */
-				st,ref-sel = <0>;
-				/* ADC converstion time: 80 clocks */
-				st,sample-time = <4>;
 				/* 1 ms panel driver settling time */
 				st,settling = <3>;
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
+
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				st,norequest-mask = <0x0F>;
+			};
 		};
 
 		/*