diff mbox series

[v3,4/4] ARM: dts: Add stmpe-adc driver to relevant devicetrees

Message ID 20181123142411.8921-4-dev@pschenker.ch (mailing list archive)
State New, archived
Headers show
Series [v3,1/4] mfd: stmpe: Move ADC related defines to header of mfd | expand

Commit Message

Philippe Schenker Nov. 23, 2018, 2:24 p.m. UTC 
From: Philippe Schenker <philippe.schenker@toradex.com>

Activate the stmpe-adc driver as found on Apalis/Colibri iMX6/T30 modules

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

Changes in v3:
 - None

Changes in v2:
 - Put common ADC settings in mfd

 arch/arm/boot/dts/imx6qdl-apalis.dtsi  | 22 ++++++++++++++--------
 arch/arm/boot/dts/imx6qdl-colibri.dtsi | 23 +++++++++++++++--------
 arch/arm/boot/dts/tegra30-apalis.dtsi  | 22 ++++++++++++++--------
 arch/arm/boot/dts/tegra30-colibri.dtsi | 22 ++++++++++++++--------
 4 files changed, 57 insertions(+), 32 deletions(-)

Comments

Dmitry Osipenko Nov. 24, 2018, 11:20 a.m. UTC | #1 
On 23.11.2018 17:24, Philippe Schenker wrote:
> From: Philippe Schenker <philippe.schenker@toradex.com>
> 
> Activate the stmpe-adc driver as found on Apalis/Colibri iMX6/T30 modules
> 
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>

Hello Philippe,

Just a very minor comment.. device trees are not for drivers, but for HW description. It will be better to s/driver/DT node/ in both commit name and description.
Thierry Reding Nov. 27, 2018, 2:21 p.m. UTC | #2 
On Fri, Nov 23, 2018 at 03:24:11PM +0100, Philippe Schenker wrote:
> From: Philippe Schenker <philippe.schenker@toradex.com>
> 
> Activate the stmpe-adc driver as found on Apalis/Colibri iMX6/T30 modules
> 
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> ---
> 
> Changes in v3:
>  - None
> 
> Changes in v2:
>  - Put common ADC settings in mfd
> 
>  arch/arm/boot/dts/imx6qdl-apalis.dtsi  | 22 ++++++++++++++--------
>  arch/arm/boot/dts/imx6qdl-colibri.dtsi | 23 +++++++++++++++--------
>  arch/arm/boot/dts/tegra30-apalis.dtsi  | 22 ++++++++++++++--------
>  arch/arm/boot/dts/tegra30-colibri.dtsi | 22 ++++++++++++++--------
>  4 files changed, 57 insertions(+), 32 deletions(-)

You might want to split this up into two patches, one for i.MX and the
other for Tegra so that the respective maintainers can apply them
separately.

Also, where are patches 1-3?

Thierry
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 3dc99dd8dde1..8db476d8978d 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -331,11 +331,18 @@ 
 		id = <0>;
 		blocks = <0x5>;
 		irq-trigger = <0x1>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+		/* forbid to use ADC channels 3-0 (touch) */
 
 		stmpe_touchscreen {
 			compatible = "st,stmpe-ts";
-			/* 3.25 MHz ADC clock speed */
-			st,adc-freq = <1>;
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
 			/* 7 length fractional part in z */
@@ -345,17 +352,16 @@ 
 			 * current limit value
 			 */
 			st,i-drive = <1>;
-			/* 12-bit ADC */
-			st,mod-12b = <1>;
-			/* internal ADC reference */
-			st,ref-sel = <0>;
-			/* ADC converstion time: 80 clocks */
-			st,sample-time = <4>;
 			/* 1 ms panel driver settling time */
 			st,settling = <3>;
 			/* 5 ms touch detect interrupt delay */
 			st,touch-det-delay = <5>;
 		};
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			st,norequest-mask = <0x0F>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 87e15e7cb32b..2e303d79c7f8 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -262,11 +262,18 @@ 
 		id = <0>;
 		blocks = <0x5>;
 		irq-trigger = <0x1>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+		/* forbid to use ADC channels 3-0 (touch) */
 
 		stmpe_touchscreen {
 			compatible = "st,stmpe-ts";
-			/* 3.25 MHz ADC clock speed */
-			st,adc-freq = <1>;
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
 			/* 7 length fractional part in z */
@@ -276,17 +283,17 @@ 
 			 * current limit value
 			 */
 			st,i-drive = <1>;
-			/* 12-bit ADC */
-			st,mod-12b = <1>;
-			/* internal ADC reference */
-			st,ref-sel = <0>;
-			/* ADC converstion time: 80 clocks */
-			st,sample-time = <4>;
 			/* 1 ms panel driver settling time */
 			st,settling = <3>;
 			/* 5 ms touch detect interrupt delay */
 			st,touch-det-delay = <5>;
 		};
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			/* 3.25 MHz ADC clock speed */
+			st,norequest-mask = <0x0F>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 7f112f192fe9..850b0d13549a 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -976,11 +976,18 @@ 
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+			/* forbid to use ADC channels 3-0 (touch) */
 
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
-				/* 3.25 MHz ADC clock speed */
-				st,adc-freq = <1>;
 				/* 8 sample average control */
 				st,ave-ctrl = <3>;
 				/* 7 length fractional part in z */
@@ -990,17 +997,16 @@ 
 				 * current limit value
 				 */
 				st,i-drive = <1>;
-				/* 12-bit ADC */
-				st,mod-12b = <1>;
-				/* internal ADC reference */
-				st,ref-sel = <0>;
-				/* ADC converstion time: 80 clocks */
-				st,sample-time = <4>;
 				/* 1 ms panel driver settling time */
 				st,settling = <3>;
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
+
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				st,norequest-mask = <0x0F>;
+			};
 		};
 
 		/*
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 35af03ca9e90..1f9198bb24ff 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -845,11 +845,18 @@ 
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+			/* forbid to use ADC channels 3-0 (touch) */
 
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
-				/* 3.25 MHz ADC clock speed */
-				st,adc-freq = <1>;
 				/* 8 sample average control */
 				st,ave-ctrl = <3>;
 				/* 7 length fractional part in z */
@@ -859,17 +866,16 @@ 
 				 * current limit value
 				 */
 				st,i-drive = <1>;
-				/* 12-bit ADC */
-				st,mod-12b = <1>;
-				/* internal ADC reference */
-				st,ref-sel = <0>;
-				/* ADC converstion time: 80 clocks */
-				st,sample-time = <4>;
 				/* 1 ms panel driver settling time */
 				st,settling = <3>;
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
+
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				st,norequest-mask = <0x0F>;
+			};
 		};
 
 		/*