@@ -139,15 +139,7 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
- clock-output-names = "osc32k";
- };
-
- iosc: internal-osc-clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <16000000>;
- clock-accuracy = <300000000>;
- clock-output-names = "iosc";
+ clock-output-names = "ext-osc32k";
};
psci {
@@ -514,7 +506,7 @@
ccu: clock@1c20000 {
compatible = "allwinner,sun50i-a64-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&osc32k>;
+ clocks = <&osc24M>, <&rtc 0>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
@@ -944,11 +936,12 @@
};
rtc: rtc@1f00000 {
- compatible = "allwinner,sun6i-a31-rtc";
- reg = <0x01f00000 0x54>;
+ compatible = "allwinner,sun50i-a64-rtc",
+ "allwinner,sun8i-h3-rtc";
+ reg = <0x01f00000 0x400>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- clock-output-names = "rtc-osc32k", "rtc-osc32k-out";
+ clock-output-names = "osc32k", "osc32k-out", "iosc";
clocks = <&osc32k>;
#clock-cells = <1>;
};
@@ -965,8 +958,7 @@
r_ccu: clock@1f01400 {
compatible = "allwinner,sun50i-a64-r-ccu";
reg = <0x01f01400 0x100>;
- clocks = <&osc24M>, <&osc32k>, <&iosc>,
- <&ccu 11>;
+ clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 11>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
The RTC module on the A64 was claimed to be the same as on the A31, when in fact it is not. It is actually compatible to the H3's RTC. The A64's RTC has some extra crypto-related registers which the H3's does not, but the exact function of these is not clear. This patch fixes the compatible string and clock properties to conform to the updated bindings. The device node for the internal oscillator is removed, as it is internalized into the RTC device. Clock references to the IOSC and LOSC are also fixed. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 22 ++++++------------- 1 file changed, 7 insertions(+), 15 deletions(-)