| Message ID | 20181213093438.29621-13-josephl@nvidia.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Tegra210 DFLL support | expand |
On Thu, Dec 13, 2018 at 10:35 AM Joseph Lo <josephl@nvidia.com> wrote: > > The Tegra124 cpufreq driver has no information to handle the Vdd-CPU > rail. So this driver shouldn't handle for the CPU clock switching from > DFLL to other PLL clocks. It was designed to work on DFLL clock only, > which handle the frequency/voltage scaling in the background. > > This patch removes the driver dependency of the CPU rail, as well as not > allow it to be built as a module and remove the removal function. So it > can keep working on DFLL clock. I assume this entire series to go in via arm-soc, so I won't be picking up cpufreq changes from it. Thanks, Rafael
On 13/12/2018 09:34, Joseph Lo wrote: > The Tegra124 cpufreq driver has no information to handle the Vdd-CPU > rail. So this driver shouldn't handle for the CPU clock switching from > DFLL to other PLL clocks. It was designed to work on DFLL clock only, > which handle the frequency/voltage scaling in the background. > > This patch removes the driver dependency of the CPU rail, as well as not > allow it to be built as a module and remove the removal function. So it > can keep working on DFLL clock. > > Cc: Viresh Kumar <viresh.kumar@linaro.org> > Cc: linux-pm@vger.kernel.org > Signed-off-by: Joseph Lo <josephl@nvidia.com> > --- > *V2: > - update the commit message since we change the driver not able to be > built as a module and remove the removal function in V2 > --- > drivers/cpufreq/Kconfig.arm | 4 +-- > drivers/cpufreq/tegra124-cpufreq.c | 41 ++---------------------------- > 2 files changed, 4 insertions(+), 41 deletions(-) > > diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm > index 4e1131ef85ae..1d83b6e81222 100644 > --- a/drivers/cpufreq/Kconfig.arm > +++ b/drivers/cpufreq/Kconfig.arm > @@ -261,8 +261,8 @@ config ARM_TEGRA20_CPUFREQ > This adds the CPUFreq driver support for Tegra20 SOCs. > > config ARM_TEGRA124_CPUFREQ > - tristate "Tegra124 CPUFreq support" > - depends on ARCH_TEGRA && CPUFREQ_DT && REGULATOR > + bool "Tegra124 CPUFreq support" > + depends on ARCH_TEGRA && CPUFREQ_DT > default y > help > This adds the CPUFreq driver support for Tegra124 SOCs. > diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c > index 43530254201a..a1bfde0a7950 100644 > --- a/drivers/cpufreq/tegra124-cpufreq.c > +++ b/drivers/cpufreq/tegra124-cpufreq.c > @@ -22,11 +22,9 @@ > #include <linux/of.h> > #include <linux/platform_device.h> > #include <linux/pm_opp.h> > -#include <linux/regulator/consumer.h> > #include <linux/types.h> > > struct tegra124_cpufreq_priv { > - struct regulator *vdd_cpu_reg; > struct clk *cpu_clk; > struct clk *pllp_clk; > struct clk *pllx_clk; > @@ -60,14 +58,6 @@ static int tegra124_cpu_switch_to_dfll(struct tegra124_cpufreq_priv *priv) > return ret; > } > > -static void tegra124_cpu_switch_to_pllx(struct tegra124_cpufreq_priv *priv) > -{ > - clk_set_parent(priv->cpu_clk, priv->pllp_clk); > - clk_disable_unprepare(priv->dfll_clk); > - regulator_sync_voltage(priv->vdd_cpu_reg); > - clk_set_parent(priv->cpu_clk, priv->pllx_clk); > -} > - > static int tegra124_cpufreq_probe(struct platform_device *pdev) > { > struct tegra124_cpufreq_priv *priv; > @@ -88,16 +78,10 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev) > if (!np) > return -ENODEV; > > - priv->vdd_cpu_reg = regulator_get(cpu_dev, "vdd-cpu"); > - if (IS_ERR(priv->vdd_cpu_reg)) { > - ret = PTR_ERR(priv->vdd_cpu_reg); > - goto out_put_np; > - } > - > priv->cpu_clk = of_clk_get_by_name(np, "cpu_g"); > if (IS_ERR(priv->cpu_clk)) { > ret = PTR_ERR(priv->cpu_clk); > - goto out_put_vdd_cpu_reg; > + goto out_put_np; > } > > priv->dfll_clk = of_clk_get_by_name(np, "dfll"); > @@ -129,15 +113,13 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev) > platform_device_register_full(&cpufreq_dt_devinfo); > if (IS_ERR(priv->cpufreq_dt_pdev)) { > ret = PTR_ERR(priv->cpufreq_dt_pdev); > - goto out_switch_to_pllx; > + goto out_put_pllp_clk; > } > > platform_set_drvdata(pdev, priv); > > return 0; > > -out_switch_to_pllx: > - tegra124_cpu_switch_to_pllx(priv); > out_put_pllp_clk: > clk_put(priv->pllp_clk); > out_put_pllx_clk: > @@ -146,34 +128,15 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev) > clk_put(priv->dfll_clk); > out_put_cpu_clk: > clk_put(priv->cpu_clk); > -out_put_vdd_cpu_reg: > - regulator_put(priv->vdd_cpu_reg); > out_put_np: > of_node_put(np); > > return ret; > } > > -static int tegra124_cpufreq_remove(struct platform_device *pdev) > -{ > - struct tegra124_cpufreq_priv *priv = platform_get_drvdata(pdev); > - > - platform_device_unregister(priv->cpufreq_dt_pdev); > - tegra124_cpu_switch_to_pllx(priv); > - > - clk_put(priv->pllp_clk); > - clk_put(priv->pllx_clk); > - clk_put(priv->dfll_clk); > - clk_put(priv->cpu_clk); > - regulator_put(priv->vdd_cpu_reg); > - > - return 0; > -} > - > static struct platform_driver tegra124_cpufreq_platdrv = { > .driver.name = "cpufreq-tegra124", > .probe = tegra124_cpufreq_probe, > - .remove = tegra124_cpufreq_remove, > }; > > static int __init tegra_cpufreq_init(void) > Acked-by: Jon Hunter <jonathanh@nvidia.com> Cheers Jon
On 13-12-18, 17:34, Joseph Lo wrote: > The Tegra124 cpufreq driver has no information to handle the Vdd-CPU > rail. So this driver shouldn't handle for the CPU clock switching from > DFLL to other PLL clocks. It was designed to work on DFLL clock only, > which handle the frequency/voltage scaling in the background. > > This patch removes the driver dependency of the CPU rail, as well as not > allow it to be built as a module and remove the removal function. So it > can keep working on DFLL clock. > > Cc: Viresh Kumar <viresh.kumar@linaro.org> > Cc: linux-pm@vger.kernel.org > Signed-off-by: Joseph Lo <josephl@nvidia.com> > --- > *V2: > - update the commit message since we change the driver not able to be > built as a module and remove the removal function in V2 > --- > drivers/cpufreq/Kconfig.arm | 4 +-- > drivers/cpufreq/tegra124-cpufreq.c | 41 ++---------------------------- > 2 files changed, 4 insertions(+), 41 deletions(-) > > diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm > index 4e1131ef85ae..1d83b6e81222 100644 > --- a/drivers/cpufreq/Kconfig.arm > +++ b/drivers/cpufreq/Kconfig.arm > @@ -261,8 +261,8 @@ config ARM_TEGRA20_CPUFREQ > This adds the CPUFreq driver support for Tegra20 SOCs. > > config ARM_TEGRA124_CPUFREQ > - tristate "Tegra124 CPUFreq support" > - depends on ARCH_TEGRA && CPUFREQ_DT && REGULATOR > + bool "Tegra124 CPUFreq support" > + depends on ARCH_TEGRA && CPUFREQ_DT > default y > help > This adds the CPUFreq driver support for Tegra124 SOCs. > diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c > index 43530254201a..a1bfde0a7950 100644 > --- a/drivers/cpufreq/tegra124-cpufreq.c > +++ b/drivers/cpufreq/tegra124-cpufreq.c > @@ -22,11 +22,9 @@ > #include <linux/of.h> > #include <linux/platform_device.h> > #include <linux/pm_opp.h> > -#include <linux/regulator/consumer.h> > #include <linux/types.h> > > struct tegra124_cpufreq_priv { > - struct regulator *vdd_cpu_reg; > struct clk *cpu_clk; > struct clk *pllp_clk; > struct clk *pllx_clk; > @@ -60,14 +58,6 @@ static int tegra124_cpu_switch_to_dfll(struct tegra124_cpufreq_priv *priv) > return ret; > } > > -static void tegra124_cpu_switch_to_pllx(struct tegra124_cpufreq_priv *priv) > -{ > - clk_set_parent(priv->cpu_clk, priv->pllp_clk); > - clk_disable_unprepare(priv->dfll_clk); > - regulator_sync_voltage(priv->vdd_cpu_reg); > - clk_set_parent(priv->cpu_clk, priv->pllx_clk); > -} > - > static int tegra124_cpufreq_probe(struct platform_device *pdev) > { > struct tegra124_cpufreq_priv *priv; > @@ -88,16 +78,10 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev) > if (!np) > return -ENODEV; > > - priv->vdd_cpu_reg = regulator_get(cpu_dev, "vdd-cpu"); > - if (IS_ERR(priv->vdd_cpu_reg)) { > - ret = PTR_ERR(priv->vdd_cpu_reg); > - goto out_put_np; > - } > - > priv->cpu_clk = of_clk_get_by_name(np, "cpu_g"); > if (IS_ERR(priv->cpu_clk)) { > ret = PTR_ERR(priv->cpu_clk); > - goto out_put_vdd_cpu_reg; > + goto out_put_np; > } > > priv->dfll_clk = of_clk_get_by_name(np, "dfll"); > @@ -129,15 +113,13 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev) > platform_device_register_full(&cpufreq_dt_devinfo); > if (IS_ERR(priv->cpufreq_dt_pdev)) { > ret = PTR_ERR(priv->cpufreq_dt_pdev); > - goto out_switch_to_pllx; > + goto out_put_pllp_clk; > } > > platform_set_drvdata(pdev, priv); > > return 0; > > -out_switch_to_pllx: > - tegra124_cpu_switch_to_pllx(priv); > out_put_pllp_clk: > clk_put(priv->pllp_clk); > out_put_pllx_clk: > @@ -146,34 +128,15 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev) > clk_put(priv->dfll_clk); > out_put_cpu_clk: > clk_put(priv->cpu_clk); > -out_put_vdd_cpu_reg: > - regulator_put(priv->vdd_cpu_reg); > out_put_np: > of_node_put(np); > > return ret; > } > > -static int tegra124_cpufreq_remove(struct platform_device *pdev) > -{ > - struct tegra124_cpufreq_priv *priv = platform_get_drvdata(pdev); > - > - platform_device_unregister(priv->cpufreq_dt_pdev); > - tegra124_cpu_switch_to_pllx(priv); > - > - clk_put(priv->pllp_clk); > - clk_put(priv->pllx_clk); > - clk_put(priv->dfll_clk); > - clk_put(priv->cpu_clk); > - regulator_put(priv->vdd_cpu_reg); > - > - return 0; > -} > - > static struct platform_driver tegra124_cpufreq_platdrv = { > .driver.name = "cpufreq-tegra124", > .probe = tegra124_cpufreq_probe, > - .remove = tegra124_cpufreq_remove, > }; > > static int __init tegra_cpufreq_init(void) Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 4e1131ef85ae..1d83b6e81222 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -261,8 +261,8 @@ config ARM_TEGRA20_CPUFREQ This adds the CPUFreq driver support for Tegra20 SOCs. config ARM_TEGRA124_CPUFREQ - tristate "Tegra124 CPUFreq support" - depends on ARCH_TEGRA && CPUFREQ_DT && REGULATOR + bool "Tegra124 CPUFreq support" + depends on ARCH_TEGRA && CPUFREQ_DT default y help This adds the CPUFreq driver support for Tegra124 SOCs. diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c index 43530254201a..a1bfde0a7950 100644 --- a/drivers/cpufreq/tegra124-cpufreq.c +++ b/drivers/cpufreq/tegra124-cpufreq.c @@ -22,11 +22,9 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_opp.h> -#include <linux/regulator/consumer.h> #include <linux/types.h> struct tegra124_cpufreq_priv { - struct regulator *vdd_cpu_reg; struct clk *cpu_clk; struct clk *pllp_clk; struct clk *pllx_clk; @@ -60,14 +58,6 @@ static int tegra124_cpu_switch_to_dfll(struct tegra124_cpufreq_priv *priv) return ret; } -static void tegra124_cpu_switch_to_pllx(struct tegra124_cpufreq_priv *priv) -{ - clk_set_parent(priv->cpu_clk, priv->pllp_clk); - clk_disable_unprepare(priv->dfll_clk); - regulator_sync_voltage(priv->vdd_cpu_reg); - clk_set_parent(priv->cpu_clk, priv->pllx_clk); -} - static int tegra124_cpufreq_probe(struct platform_device *pdev) { struct tegra124_cpufreq_priv *priv; @@ -88,16 +78,10 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev) if (!np) return -ENODEV; - priv->vdd_cpu_reg = regulator_get(cpu_dev, "vdd-cpu"); - if (IS_ERR(priv->vdd_cpu_reg)) { - ret = PTR_ERR(priv->vdd_cpu_reg); - goto out_put_np; - } - priv->cpu_clk = of_clk_get_by_name(np, "cpu_g"); if (IS_ERR(priv->cpu_clk)) { ret = PTR_ERR(priv->cpu_clk); - goto out_put_vdd_cpu_reg; + goto out_put_np; } priv->dfll_clk = of_clk_get_by_name(np, "dfll"); @@ -129,15 +113,13 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev) platform_device_register_full(&cpufreq_dt_devinfo); if (IS_ERR(priv->cpufreq_dt_pdev)) { ret = PTR_ERR(priv->cpufreq_dt_pdev); - goto out_switch_to_pllx; + goto out_put_pllp_clk; } platform_set_drvdata(pdev, priv); return 0; -out_switch_to_pllx: - tegra124_cpu_switch_to_pllx(priv); out_put_pllp_clk: clk_put(priv->pllp_clk); out_put_pllx_clk: @@ -146,34 +128,15 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev) clk_put(priv->dfll_clk); out_put_cpu_clk: clk_put(priv->cpu_clk); -out_put_vdd_cpu_reg: - regulator_put(priv->vdd_cpu_reg); out_put_np: of_node_put(np); return ret; } -static int tegra124_cpufreq_remove(struct platform_device *pdev) -{ - struct tegra124_cpufreq_priv *priv = platform_get_drvdata(pdev); - - platform_device_unregister(priv->cpufreq_dt_pdev); - tegra124_cpu_switch_to_pllx(priv); - - clk_put(priv->pllp_clk); - clk_put(priv->pllx_clk); - clk_put(priv->dfll_clk); - clk_put(priv->cpu_clk); - regulator_put(priv->vdd_cpu_reg); - - return 0; -} - static struct platform_driver tegra124_cpufreq_platdrv = { .driver.name = "cpufreq-tegra124", .probe = tegra124_cpufreq_probe, - .remove = tegra124_cpufreq_remove, }; static int __init tegra_cpufreq_init(void)
The Tegra124 cpufreq driver has no information to handle the Vdd-CPU rail. So this driver shouldn't handle for the CPU clock switching from DFLL to other PLL clocks. It was designed to work on DFLL clock only, which handle the frequency/voltage scaling in the background. This patch removes the driver dependency of the CPU rail, as well as not allow it to be built as a module and remove the removal function. So it can keep working on DFLL clock. Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: linux-pm@vger.kernel.org Signed-off-by: Joseph Lo <josephl@nvidia.com> --- *V2: - update the commit message since we change the driver not able to be built as a module and remove the removal function in V2 --- drivers/cpufreq/Kconfig.arm | 4 +-- drivers/cpufreq/tegra124-cpufreq.c | 41 ++---------------------------- 2 files changed, 4 insertions(+), 41 deletions(-)