| Message ID | 20181223163141.6792-3-shc_work@mail.ru (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/4] ARM: dts: imx6q-phytec-pbab01: Remove duplicate "chosen" node | expand |
On Sun, Dec 23, 2018 at 07:31:40PM +0300, Alexander Shiyan wrote: > Use GPIO_ACTIVE_LOW/HIGH for GPIO description. > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru> > --- > arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi > index 211640e..81007d6 100644 > --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi > @@ -23,7 +23,7 @@ > regulator-name = "usb_otg_vbus"; > regulator-min-microvolt = <5000000>; > regulator-max-microvolt = <5000000>; > - gpio = <&gpio4 15 0>; > + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; > enable-active-high; > }; > > @@ -33,7 +33,7 @@ > regulator-name = "usb_h1_vbus"; > regulator-min-microvolt = <5000000>; > regulator-max-microvolt = <5000000>; > - gpio = <&gpio1 0 0>; > + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; > enable-active-high; > }; > }; > @@ -43,12 +43,12 @@ > > green { > label = "phyflex:green"; > - gpios = <&gpio1 30 0>; > + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; > }; > > red { > label = "phyflex:red"; > - gpios = <&gpio2 31 0>; > + gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; > }; > }; > }; > @@ -69,7 +69,7 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_ecspi3>; > status = "okay"; > - cs-gpios = <&gpio4 24 0>; > + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; GPIO_ACTIVE_LOW is defined as 1 rather than 0. Shawn > > flash@0 { > compatible = "m25p80", "jedec,spi-nor"; > -- > 2.10.2 >
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 211640e..81007d6 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -23,7 +23,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio4 15 0>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -33,7 +33,7 @@ regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio1 0 0>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -43,12 +43,12 @@ green { label = "phyflex:green"; - gpios = <&gpio1 30 0>; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; }; red { label = "phyflex:red"; - gpios = <&gpio2 31 0>; + gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; }; }; }; @@ -69,7 +69,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; - cs-gpios = <&gpio4 24 0>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; flash@0 { compatible = "m25p80", "jedec,spi-nor";
Use GPIO_ACTIVE_LOW/HIGH for GPIO description. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> --- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)